wip

.config/cypress-devcontainer.yml

@@ -1,223 +0,0 @@
-#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-# Misskey configuration
-#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-#   ┌────────────────────────┐
-#───┘ Initial Setup Password └─────────────────────────────────────────────────────
-
-# Password to initiate setting up admin account.
-# It will not be used after the initial setup is complete.
-#
-# Be sure to change this when you set up Misskey via the Internet.
-#
-# The provider of the service who sets up Misskey on behalf of the customer should
-# set this value to something unique when generating the Misskey config file,
-# and provide it to the customer.
-setupPassword: example_password_please_change_this_or_you_will_get_hacked
-
-#   ┌─────┐
-#───┘ URL └─────────────────────────────────────────────────────
-
-# Final accessible URL seen by a user.
-url: 'http://misskey.local'
-
-# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
-# URL SETTINGS AFTER THAT!
-
-#   ┌───────────────────────┐
-#───┘ Port and TLS settings └───────────────────────────────────
-
-#
-# Misskey requires a reverse proxy to support HTTPS connections.
-#
-#                 +----- https://example.tld/ ------------+
-#   +------+      |+-------------+      +----------------+|
-#   | User | ---> || Proxy (443) | ---> | Misskey (3000) ||
-#   +------+      |+-------------+      +----------------+|
-#                 +---------------------------------------+
-#
-#   You need to set up a reverse proxy. (e.g. nginx)
-#   An encrypted connection with HTTPS is highly recommended
-#   because tokens may be transferred in GET requests.
-
-# The port that your Misskey server should listen on.
-port: 61812
-
-#   ┌──────────────────────────┐
-#───┘ PostgreSQL configuration └────────────────────────────────
-
-db:
-  host: db
-  port: 5432
-
-  # Database name
-  db: misskey
-
-  # Auth
-  user: postgres
-  pass: postgres
-
-  # Whether disable Caching queries
-  #disableCache: true
-
-  # Extra Connection options
-  #extra:
-  #  ssl: true
-
-dbReplications: false
-
-# You can configure any number of replicas here
-#dbSlaves:
-#  -
-#    host:
-#    port:
-#    db:
-#    user:
-#    pass:
-#  -
-#    host:
-#    port:
-#    db:
-#    user:
-#    pass:
-
-#   ┌─────────────────────┐
-#───┘ Redis configuration └─────────────────────────────────────
-
-redis:
-  host: redis
-  port: 6379
-  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-  #pass: example-pass
-  #prefix: example-prefix
-  #db: 1
-
-#redisForPubsub:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForJobQueue:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForTimelines:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForReactions:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#   ┌───────────────────────────┐
-#───┘ MeiliSearch configuration └─────────────────────────────
-
-#meilisearch:
-#  host: meilisearch
-#  port: 7700
-#  apiKey: ''
-#  ssl: true
-#  index: ''
-
-#   ┌───────────────┐
-#───┘ ID generation └───────────────────────────────────────────
-
-# You can select the ID generation method.
-# You don't usually need to change this setting, but you can
-# change it according to your preferences.
-
-# Available methods:
-# aid ... Short, Millisecond accuracy
-# aidx ... Millisecond accuracy
-# meid ... Similar to ObjectID, Millisecond accuracy
-# ulid ... Millisecond accuracy
-# objectid ... This is left for backward compatibility
-
-# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
-# ID SETTINGS AFTER THAT!
-
-id: 'aidx'
-
-#   ┌────────────────┐
-#───┘ Error tracking └──────────────────────────────────────────
-
-# Sentry is available for error tracking.
-# See the Sentry documentation for more details on options.
-
-#sentryForBackend:
-#  enableNodeProfiling: true
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#sentryForFrontend:
-#  vueIntegration:
-#    tracingOptions:
-#      trackComponents: true
-#  browserTracingIntegration:
-#  replayIntegration:
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#   ┌─────────────────────┐
-#───┘ Other configuration └─────────────────────────────────────
-
-# Whether disable HSTS
-#disableHsts: true
-
-# Number of worker processes
-#clusterLimit: 1
-
-# Job concurrency per worker
-# deliverJobConcurrency: 128
-# inboxJobConcurrency: 16
-
-# Job rate limiter
-# deliverJobPerSec: 128
-# inboxJobPerSec: 32
-
-# Job attempts
-# deliverJobMaxAttempts: 12
-# inboxJobMaxAttempts: 8
-
-# IP address family used for outgoing request (ipv4, ipv6 or dual)
-#outgoingAddressFamily: ipv4
-
-# Proxy for HTTP/HTTPS
-#proxy: http://127.0.0.1:3128
-
-proxyBypassHosts:
-  - api.deepl.com
-  - api-free.deepl.com
-  - www.recaptcha.net
-  - hcaptcha.com
-  - challenges.cloudflare.com
-
-# Proxy for SMTP/SMTPS
-#proxySmtp: http://127.0.0.1:3128   # use HTTP/1.1 CONNECT
-#proxySmtp: socks4://127.0.0.1:1080 # use SOCKS4
-#proxySmtp: socks5://127.0.0.1:1080 # use SOCKS5
-
-# Media Proxy
-#mediaProxy: https://example.com/proxy
-
-allowedPrivateNetworks: [
-  '127.0.0.1/32'
-]
-
-# Upload or download file size limits (bytes)
-#maxFileSize: 262144000

.config/docker_example.env

@@ -1,11 +1,4 @@
-# misskey settings
-# MISSKEY_URL=https://example.tld/
-
 # db settings
 POSTGRES_PASSWORD=example-misskey-pass
-# DATABASE_PASSWORD=${POSTGRES_PASSWORD}
 POSTGRES_USER=example-misskey-user
-# DATABASE_USER=${POSTGRES_USER}
 POSTGRES_DB=misskey
-# DATABASE_DB=${POSTGRES_DB}
-DATABASE_URL="postgres://${POSTGRES_USER}:${POSTGRES_PASSWORD}@db:5432/${POSTGRES_DB}"

.config/docker_example.yml

@@ -6,7 +6,6 @@
 #───┘ URL └─────────────────────────────────────────────────────
 
 # Final accessible URL seen by a user.
-# You can set url from an environment variable instead.
 url: https://example.tld/
 
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
@@ -39,11 +38,9 @@ db:
   port: 5432
 
   # Database name
-  # You can set db from an environment variable instead.
   db: misskey
 
   # Auth
-  # You can set user and pass from environment variables instead.
   user: example-misskey-user
   pass: example-misskey-pass
 
@@ -59,17 +56,17 @@ dbReplications: false
 # You can configure any number of replicas here
 #dbSlaves:
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 
 #   ┌─────────────────────┐
 #───┘ Redis configuration └─────────────────────────────────────
@@ -98,45 +95,8 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
-#redisForTimelines:
+#   ┌───────────────────────────┐
-#  host: redis
+#───┘ MeiliSearch configuration └─────────────────────────────
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForReactions:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#   ┌───────────────────────────────┐
-#───┘ Fulltext search configuration └─────────────────────────────
-
-# These are the setting items for the full-text search provider.
-fulltextSearch:
-  # You can select the ID generation method.
-  # - sqlLike (default)
-  #   Use SQL-like search.
-  #   This is a standard feature of PostgreSQL, so no special extensions are required.
-  # - sqlPgroonga
-  #   Use pgroonga.
-  #   You need to install pgroonga and configure it as a PostgreSQL extension.
-  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
-  #   see: https://pgroonga.github.io/tutorial/
-  # - meilisearch
-  #   Use Meilisearch.
-  #   You need to install Meilisearch and configure.
-  provider: sqlLike
-
-# For Meilisearch settings.
-# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
-# You can set scope to local (default value) or global
-# (include notes from remote).
 
 #meilisearch:
 #  host: meilisearch
@@ -144,7 +104,6 @@ fulltextSearch:
 #  apiKey: ''
 #  ssl: true
 #  index: ''
-#  scope: local
 
 #   ┌───────────────┐
 #───┘ ID generation └───────────────────────────────────────────
@@ -155,7 +114,6 @@ fulltextSearch:
 
 # Available methods:
 # aid ... Short, Millisecond accuracy
-# aidx ... Millisecond accuracy
 # meid ... Similar to ObjectID, Millisecond accuracy
 # ulid ... Millisecond accuracy
 # objectid ... This is left for backward compatibility
@@ -163,27 +121,7 @@ fulltextSearch:
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # ID SETTINGS AFTER THAT!
 
-id: 'aidx'
+id: 'aid'
-
-#   ┌────────────────┐
-#───┘ Error tracking └──────────────────────────────────────────
-
-# Sentry is available for error tracking.
-# See the Sentry documentation for more details on options.
-
-#sentryForBackend:
-#  enableNodeProfiling: true
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#sentryForFrontend:
-#  vueIntegration:
-#    tracingOptions:
-#      trackComponents: true
-#  browserTracingIntegration:
-#  replayIntegration:
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
 
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
@@ -200,7 +138,7 @@ id: 'aidx'
 
 # Job rate limiter
 # deliverJobPerSec: 128
-# inboxJobPerSec: 32
+# inboxJobPerSec: 16
 
 # Job attempts
 # deliverJobMaxAttempts: 12
@@ -227,22 +165,15 @@ proxyBypassHosts:
 # Media Proxy
 #mediaProxy: https://example.com/proxy
 
-# For security reasons, uploading attachments from the intranet is prohibited,
+# Proxy remote files (default: false)
-# but exceptions can be made from the following settings. Default value is "undefined".
+#proxyRemoteFiles: true
-# Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
+
+# Sign to ActivityPub GET request (default: true)
+signToActivityPubGet: true
+
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
 #]
 
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
-
-# Log settings
-# logging:
-#   sql:
-#     # Outputs query parameters during SQL execution to the log.
-#     # default: false
-#     enableQueryParamLogging: false
-#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
-#     # default: false
-#     disableQueryTruncation: false

.config/example.yml

@@ -2,77 +2,6 @@
 # Misskey configuration
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
-#   ┌──────────────────────────────┐
-#───┘ a boring but important thing └────────────────────────────
-
-#
-# First of all, let me tell you a story that may possibly be
-# boring to you and possibly important to you.
-#
-# Misskey is licensed under the AGPLv3 license. This license is
-# known to be often misunderstood.  Please read the following
-# instructions carefully and select the appropriate option so
-# that you do not negligently cause a license violation.
-#
-
-# --------
-# Option 1: If you host Misskey AS-IS (without any changes to
-#           the source code. forks are not included).
-#
-# Step 1: Congratulations! You don't need to do anything.
-
-# --------
-# Option 2: If you have made changes to the source code (forks
-#           are included) and publish a Git repository of source
-#           code.  There should be no access restrictions on
-#           this repository.  Strictly speaking, it doesn't have
-#           to be a Git repository, but you'll probably use Git!
-#
-# Step 1: Build and run the Misskey server first.
-# Step 2: Open <https://your.misskey.example/admin/settings> in
-#         your browser with the administrator account.
-# Step 3: Enter the URL of your Git repository in the
-#         "Repository URL" field.
-
-# --------
-# Option 3: If neither of the above applies to you.
-#           (In this case, the source code should be published
-#           on the Misskey interface.  IT IS NOT ENOUGH TO
-#           DISCLOSE THE SOURCE CODE WHEN A USER REQUESTS IT BY
-#           E-MAIL OR OTHER MEANS.  If you are not satisfied
-#           with this, it is recommended that you read the
-#           license again carefully.  Anyway, enabling this
-#           option will automatically generate and publish a
-#           tarball at build time, protecting you from
-#           inadvertent license violations. (There is no legal
-#           guarantee, of course.)  The tarball will generated
-#           from the root directory of your codebase.  So it is
-#           also recommended to check <built/tarball> directory
-#           once after building and before activating the server
-#           to avoid ACCIDENTAL LEAKING OF SENSITIVE INFORMATION.
-#           To prevent certain files from being included in the
-#           tarball, add a glob pattern after line 15 in
-#           <scripts/tarball.mjs>.  DO NOT FORGET TO BUILD AFTER
-#           ENABLING THIS OPTION!)
-#
-# Step 1: Uncomment the following line.
-#
-# publishTarballInsteadOfProvideRepositoryUrl: true
-
-#   ┌────────────────────────┐
-#───┘ Initial Setup Password └─────────────────────────────────────────────────────
-
-# Password to initiate setting up admin account.
-# It will not be used after the initial setup is complete.
-#
-# Be sure to change this when you set up Misskey via the Internet.
-#
-# The provider of the service who sets up Misskey on behalf of the customer should
-# set this value to something unique when generating the Misskey config file,
-# and provide it to the customer.
-#
-# setupPassword: example_password_please_change_this_or_you_will_get_hacked
-
 #   ┌─────┐
 #───┘ URL └─────────────────────────────────────────────────────
 
@@ -101,10 +30,6 @@ url: https://example.tld/
 # The port that your Misskey server should listen on.
 port: 3000
 
-# You can also use UNIX domain socket.
-# socket: /path/to/misskey.sock
-# chmodSocket: '777'
-
 #   ┌──────────────────────────┐
 #───┘ PostgreSQL configuration └────────────────────────────────
 
@@ -131,17 +56,17 @@ dbReplications: false
 # You can configure any number of replicas here
 #dbSlaves:
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 
 #   ┌─────────────────────┐
 #───┘ Redis configuration └─────────────────────────────────────
@@ -153,8 +78,6 @@ redis:
   #pass: example-pass
   #prefix: example-prefix
   #db: 1
-  # You can specify more ioredis options...
-  #username: example-username
 
 #redisForPubsub:
 #  host: localhost
@@ -163,8 +86,6 @@ redis:
 #  #pass: example-pass
 #  #prefix: example-prefix
 #  #db: 1
-#  # You can specify more ioredis options...
-#  #username: example-username
 
 #redisForJobQueue:
 #  host: localhost
@@ -173,52 +94,9 @@ redis:
 #  #pass: example-pass
 #  #prefix: example-prefix
 #  #db: 1
-#  # You can specify more ioredis options...
-#  #username: example-username
 
-#redisForTimelines:
+#   ┌───────────────────────────┐
-#  host: localhost
+#───┘ MeiliSearch configuration └─────────────────────────────
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-#  # You can specify more ioredis options...
-#  #username: example-username
-
-#redisForReactions:
-#  host: localhost
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-#  # You can specify more ioredis options...
-#  #username: example-username
-
-#   ┌───────────────────────────────┐
-#───┘ Fulltext search configuration └─────────────────────────────
-
-# These are the setting items for the full-text search provider.
-fulltextSearch:
-  # You can select the ID generation method.
-  # - sqlLike (default)
-  #   Use SQL-like search.
-  #   This is a standard feature of PostgreSQL, so no special extensions are required.
-  # - sqlPgroonga
-  #   Use pgroonga.
-  #   You need to install pgroonga and configure it as a PostgreSQL extension.
-  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
-  #   see: https://pgroonga.github.io/tutorial/
-  # - meilisearch
-  #   Use Meilisearch.
-  #   You need to install Meilisearch and configure.
-  provider: sqlLike
-
-# For Meilisearch settings.
-# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
-# You can set scope to local (default value) or global
-# (include notes from remote).
 
 #meilisearch:
 #  host: localhost
@@ -226,7 +104,6 @@ fulltextSearch:
 #  apiKey: ''
 #  ssl: true
 #  index: ''
-#  scope: local
 
 #   ┌───────────────┐
 #───┘ ID generation └───────────────────────────────────────────
@@ -237,7 +114,6 @@ fulltextSearch:
 
 # Available methods:
 # aid ... Short, Millisecond accuracy
-# aidx ... Millisecond accuracy
 # meid ... Similar to ObjectID, Millisecond accuracy
 # ulid ... Millisecond accuracy
 # objectid ... This is left for backward compatibility
@@ -245,27 +121,7 @@ fulltextSearch:
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # ID SETTINGS AFTER THAT!
 
-id: 'aidx'
+id: 'aid'
-
-#   ┌────────────────┐
-#───┘ Error tracking └──────────────────────────────────────────
-
-# Sentry is available for error tracking.
-# See the Sentry documentation for more details on options.
-
-#sentryForBackend:
-#  enableNodeProfiling: true
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#sentryForFrontend:
-#  vueIntegration:
-#    tracingOptions:
-#      trackComponents: true
-#  browserTracingIntegration:
-#  replayIntegration:
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
 
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
@@ -279,22 +135,19 @@ id: 'aidx'
 # Job concurrency per worker
 #deliverJobConcurrency: 128
 #inboxJobConcurrency: 16
-#relationshipJobConcurrency: 16
+#relashionshipJobConcurrency: 16
-# What's relationshipJob?:
+# What's relashionshipJob?:
 #  Follow, unfollow, block and unblock(ings) while following-imports, etc. or account migrations.
 
 # Job rate limiter
 #deliverJobPerSec: 128
-#inboxJobPerSec: 32
+#inboxJobPerSec: 16
-#relationshipJobPerSec: 64
+#relashionshipJobPerSec: 64
 
 # Job attempts
 #deliverJobMaxAttempts: 12
 #inboxJobMaxAttempts: 8
 
-# Local address used for outgoing requests
-#outgoingAddress: 127.0.0.1
-
 # IP address family used for outgoing request (ipv4, ipv6 or dual)
 #outgoingAddressFamily: ipv4
 
@@ -319,31 +172,22 @@ proxyBypassHosts:
 # * Perform image compression (on a different server resource than the main process)
 #mediaProxy: https://example.com/proxy
 
+# Proxy remote files (default: false)
+# Proxy remote files by this instance or mediaProxy to prevent remote files from running in remote domains.
+#proxyRemoteFiles: true
+
 # Movie Thumbnail Generation URL
 # There is no reference implementation.
 # For example, Misskey will point to the following URL:
 #   https://example.com/thumbnail.webp?thumbnail=1&url=https%3A%2F%2Fstorage.example.com%2Fpath%2Fto%2Fvideo.mp4
 #videoThumbnailGenerator: https://example.com
 
-# For security reasons, uploading attachments from the intranet is prohibited,
+# Sign to ActivityPub GET request (default: true)
-# but exceptions can be made from the following settings. Default value is "undefined".
+signToActivityPubGet: true
-# Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
+
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
 #]
 
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
-
-# PID File of master process
-#pidFile: /tmp/misskey.pid
-
-# Log settings
-# logging:
-#   sql:
-#     # Outputs query parameters during SQL execution to the log.
-#     # default: false
-#     enableQueryParamLogging: false
-#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
-#     # default: false
-#     disableQueryTruncation: false

.devcontainer/devcontainer.json

@@ -1,24 +1,23 @@
 {
 	"name": "Misskey",
-	"dockerComposeFile": "compose.yml",
+	"dockerComposeFile": "docker-compose.yml",
 	"service": "app",
 	"workspaceFolder": "/workspace",
 	"features": {
+		"ghcr.io/devcontainers-contrib/features/pnpm:2": {},
 		"ghcr.io/devcontainers/features/node:1": {
-			"version": "22.15.0"
+			"version": "18.16.0"
-		},
-		"ghcr.io/devcontainers-extra/features/pnpm:2": {
-			"version": "10.10.0"
 		}
 	},
 	"forwardPorts": [3000],
-	"postCreateCommand": "/bin/bash .devcontainer/init.sh",
+	"postCreateCommand": "sudo chmod 755 .devcontainer/init.sh && .devcontainer/init.sh",
 	"customizations": {
 		"vscode": {
 			"extensions": [
 				"editorconfig.editorconfig",
 				"dbaeumer.vscode-eslint",
 				"Vue.volar",
+				"Vue.vscode-typescript-vue-plugin",
 				"Orta.vscode-jest",
 				"dbaeumer.vscode-eslint",
 				"mrmlnc.vscode-json5"

.devcontainer/devcontainer.yml

@@ -56,17 +56,17 @@ dbReplications: false
 # You can configure any number of replicas here
 #dbSlaves:
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 
 #   ┌─────────────────────┐
 #───┘ Redis configuration └─────────────────────────────────────
@@ -95,22 +95,6 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
-#redisForTimelines:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForReactions:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
 #   ┌───────────────────────────┐
 #───┘ MeiliSearch configuration └─────────────────────────────
 
@@ -130,7 +114,6 @@ redis:
 
 # Available methods:
 # aid ... Short, Millisecond accuracy
-# aidx ... Millisecond accuracy
 # meid ... Similar to ObjectID, Millisecond accuracy
 # ulid ... Millisecond accuracy
 # objectid ... This is left for backward compatibility
@@ -138,27 +121,7 @@ redis:
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # ID SETTINGS AFTER THAT!
 
-id: 'aidx'
+id: 'aid'
-
-#   ┌────────────────┐
-#───┘ Error tracking └──────────────────────────────────────────
-
-# Sentry is available for error tracking.
-# See the Sentry documentation for more details on options.
-
-#sentryForBackend:
-#  enableNodeProfiling: true
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#sentryForFrontend:
-#  vueIntegration:
-#    tracingOptions:
-#      trackComponents: true
-#  browserTracingIntegration:
-#  replayIntegration:
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
 
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
@@ -175,7 +138,7 @@ id: 'aidx'
 
 # Job rate limiter
 # deliverJobPerSec: 128
-# inboxJobPerSec: 32
+# inboxJobPerSec: 16
 
 # Job attempts
 # deliverJobMaxAttempts: 12
@@ -202,6 +165,12 @@ proxyBypassHosts:
 # Media Proxy
 #mediaProxy: https://example.com/proxy
 
+# Proxy remote files (default: false)
+#proxyRemoteFiles: true
+
+# Sign to ActivityPub GET request (default: true)
+signToActivityPubGet: true
+
 allowedPrivateNetworks: [
   '127.0.0.1/32'
 ]

.devcontainer/docker-compose.yml

@@ -1,12 +1,13 @@
+version: '3.8'
+
 services:
   app:
-    build:
+    build: 
       context: .
       dockerfile: Dockerfile
 
     volumes:
       - ../:/workspace:cached
-      - node_modules:/workspace/node_modules
 
     command: sleep infinity
 
@@ -45,7 +46,6 @@ services:
 volumes:
   postgres-data:
   redis-data:
-  node_modules:
 
 networks:
   internal_network:

.devcontainer/init.sh

@@ -2,14 +2,10 @@
 
 set -xe
 
-sudo chown node node_modules
+sudo chown -R node /workspace
-sudo apt-get update
-sudo apt-get -y install libgtk2.0-0 libgtk-3-0 libgbm-dev libnotify-dev libnss3 libxss1 libasound2 libxtst6 xauth xvfb
-git config --global --add safe.directory /workspace
 git submodule update --init
 pnpm config set store-dir /home/node/.local/share/pnpm/store
 pnpm install --frozen-lockfile
 cp .devcontainer/devcontainer.yml .config/default.yml
 pnpm build
 pnpm migrate
-pnpm exec cypress install

.dockerignore

@@ -7,11 +7,12 @@ Dockerfile
 build/
 built/
 db/
-.devcontainer/compose.yml
+docker-compose.yml
 node_modules/
 packages/*/node_modules
 redis/
 files/
+misskey-assets/
 fluent-emojis/
 .pnp.*
 
@@ -27,4 +28,4 @@ fluent-emojis/
 
 .idea/
 packages/*/.vscode/
-packages/backend/test/compose.yml
+packages/backend/test/docker-compose.yml

.editorconfig

@@ -6,10 +6,6 @@ indent_size = 2
 charset = utf-8
 insert_final_newline = true
 end_of_line = lf
-trim_trailing_whitespace = true
-
-[*.md]
-trim_trailing_whitespace = false
 
 [*.{yml,yaml}]
 indent_style = space

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+patreon: syuilo

.github/ISSUE_TEMPLATE/01_bug-report.md

@@ -0,0 +1,60 @@
+---
+name: 🐛 Bug Report
+about: Create a report to help us improve
+title: ''
+labels: ⚠️bug?
+assignees: ''
+
+---
+
+<!--
+Thanks for reporting!
+First, in order to avoid duplicate Issues, please search to see if the problem you found has already been reported.
+Also, If you are NOT owner/admin of server, PLEASE DONT REPORT SERVER SPECIFIC ISSUES TO HERE! (e.g. feature XXX is not working in misskey.example) Please try with another misskey servers, and if your issue is only reproducible with specific server, contact your server's owner/admin first.
+-->
+
+## 💡 Summary
+
+<!-- Tell us what the bug is -->
+
+## 🥰 Expected Behavior
+
+<!--- Tell us what should happen -->
+
+## 🤬 Actual Behavior
+
+<!--
+Tell us what happens instead of the expected behavior.
+Please include errors from the developer console and/or server log files if you have access to them.
+-->
+
+## 📝 Steps to Reproduce
+
+1.
+2.
+3.
+
+## 📌 Environment
+
+<!-- Tell us where on the platform it happens -->
+<!-- DO NOT WRITE "latest". Please provide the specific version. -->
+
+### 💻 Frontend
+* Model and OS of the device(s):
+  <!-- Example: MacBook Pro (14inch, 2021), macOS Ventura 13.4 -->
+* Browser:
+  <!-- Example: Chrome 113.0.5672.126 -->
+* Server URL:
+  <!-- Example: misskey.io -->
+* Misskey:
+  13.x.x
+
+### 🛰 Backend (for server admin)
+<!-- If you are using a managed service, put that after the version. -->
+
+* Installation Method or Hosting Service: <!-- Example: docker compose, k8s/docker, systemd, "Misskey install shell script", development environment -->
+* Misskey: 13.x.x
+* Node: 18.x.x
+* PostgreSQL: 15.x.x
+* Redis: 7.x.x
+* OS and Architecture: <!-- Example: Ubuntu 22.04.2 LTS aarch64 -->

.github/ISSUE_TEMPLATE/01_bug-report.yml

@@ -1,97 +0,0 @@
-name: 🐛 Bug Report
-description: Create a report to help us improve
-labels: ["⚠️bug?"]
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for reporting!
-        First, in order to avoid duplicate Issues, please search to see if the problem you found has already been reported.
-        Also, If you are NOT owner/admin of server, PLEASE DONT REPORT SERVER SPECIFIC ISSUES TO HERE! (e.g. feature XXX is not working in misskey.example) Please try with another misskey servers, and if your issue is only reproducible with specific server, contact your server's owner/admin first.
-
-  - type: textarea
-    attributes:
-      label: 💡 Summary
-      description: Tell us what the bug is
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: 🥰 Expected Behavior
-      description: Tell us what should happen
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: 🤬 Actual Behavior
-      description: |
-        Tell us what happens instead of the expected behavior.
-        Please include errors from the developer console and/or server log files if you have access to them.
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: 📝 Steps to Reproduce
-      placeholder: |
-        1.
-        2.
-        3.
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: 💻 Frontend Environment
-      description: |
-        Tell us where on the platform it happens
-        DO NOT WRITE "latest". Please provide the specific version.
-
-        Examples:
-          * Model and OS of the device(s): MacBook Pro (14inch, 2021), macOS Ventura 13.4
-          * Browser: Chrome 113.0.5672.126
-          * Server URL: misskey.example.com
-          * Misskey: 2025.x.x
-      value: |
-        * Model and OS of the device(s):
-        * Browser:
-        * Server URL:
-        * Misskey:
-      render: markdown
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: 🛰 Backend Environment (for server admin)
-      description: |
-        Tell us where on the platform it happens
-        DO NOT WRITE "latest". Please provide the specific version.
-        If you are using a managed service, put that after the version.
-
-        Examples:
-          * Installation Method or Hosting Service: docker compose, k8s/docker, systemd, "Misskey install shell script", development environment
-          * Misskey: 2025.x.x
-          * Node: 20.x.x
-          * PostgreSQL: 15.x.x
-          * Redis: 7.x.x
-          * OS and Architecture: Ubuntu 24.04.2 LTS aarch64
-      value: |
-        * Installation Method or Hosting Service:
-        * Misskey:
-        * Node:
-        * PostgreSQL:
-        * Redis:
-        * OS and Architecture:
-      render: markdown
-    validations:
-      required: false
-
-  - type: checkboxes
-    attributes:
-      label: Do you want to address this bug yourself?
-      options:
-        - label: Yes, I will patch the bug myself and send a pull request

.github/ISSUE_TEMPLATE/02_feature-request.md

@@ -0,0 +1,12 @@
+---
+name: ✨ Feature Request
+about: Suggest an idea for this project
+title: ''
+labels: ✨Feature
+assignees: ''
+
+---
+
+## Summary
+
+<!-- Tell us what the suggestion is -->

.github/ISSUE_TEMPLATE/02_feature-request.yml

@@ -1,22 +0,0 @@
-name: ✨ Feature Request
-description: Suggest an idea for this project
-labels: ["✨Feature"]
-
-body:
-  - type: textarea
-    attributes:
-      label: Summary
-      description: Tell us what the suggestion is
-    validations:
-      required: true
-  - type: textarea
-    attributes:
-      label: Purpose
-      description: Describe the specific problem or need you think this feature will solve, and who it will help.
-    validations:
-      required: true
-  - type: checkboxes
-    attributes:
-      label: Do you want to implement this feature yourself?
-      options:
-        - label: Yes, I will implement this by myself and send a pull request

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +1,7 @@
 contact_links:
+  - name: 👪 Misskey Forum
+    url: https://forum.misskey.io/
+    about: Ask questions and share knowledge
   - name: 💬 Misskey official Discord
     url: https://discord.gg/Wp8gVStHW3
     about: Chat freely about Misskey
-  # 仮
-  - name: 💬 Start discussion
-    url: https://github.com/misskey-dev/misskey/discussions
-    about: The official forum to join conversation and ask question

.github/dependabot.yml

@@ -10,36 +10,23 @@ updates:
   schedule:
     interval: daily
   open-pull-requests-limit: 0
-
-# Add only the root, not each workspace item
-# https://github.com/dependabot/dependabot-core/issues/4993#issuecomment-1289133027
 - package-ecosystem: npm
   directory: "/"
   schedule:
     interval: daily
   open-pull-requests-limit: 0
-  # List dependencies required to be updated together, sharing the same version numbers.
+- package-ecosystem: npm
-  # Those who simply have the common owner (e.g. @fastify) don't need to be listed.
+  directory: "/packages/backend"
-  groups:
+  schedule:
-    aws-sdk:
+    interval: daily
-      patterns:
+  open-pull-requests-limit: 0
-        - "@aws-sdk/*"
+- package-ecosystem: npm
-    nestjs:
+  directory: "/packages/frontend"
-      patterns:
+  schedule:
-        - "@nestjs/*"
+    interval: daily
-    slacc:
+  open-pull-requests-limit: 0
-      patterns:
+- package-ecosystem: npm
-        - "slacc-*"
+  directory: "/packages/sw"
-    storybook:
+  schedule:
-      patterns:
+    interval: daily
-        - "storybook*"
+  open-pull-requests-limit: 0
-        - "@storybook/*"
-    swc-core:
-      patterns:
-        - "@swc/core*"
-    typescript-eslint:
-      patterns:
-        - "@typescript-eslint/*"
-    tensorflow:
-      patterns:
-        - "@tensorflow/*"

.github/labeler.yml

@@ -1,34 +1,21 @@
 'packages/backend':
-- any:
+- packages/backend/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['packages/backend/**/*']
 
 'packages/backend:test':
-- any:
+- packages/backend/test/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['packages/backend/test/**/*', 'packages/backend/test-federation/**/*']
 
 'packages/frontend':
-- any:
+- packages/frontend/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['packages/frontend/**/*']
 
 'packages/frontend:test':
-- any:
+- cypress/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['cypress/**/*']
 
 'packages/sw':
-- any:
+- packages/sw/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['packages/sw/**/*']
 
 'packages/misskey-js':
-- any:
+- packages/misskey-js/**/*
-  - changed-files:
-    - any-glob-to-any-file: ['packages/misskey-js/**/*']
 
 'packages/misskey-js:test':
-- any:
+- packages/misskey-js/test/**/*
-  - changed-files:
+- packages/misskey-js/test-d/**/*
-    - any-glob-to-any-file: ['packages/misskey-js/test/**/*', 'packages/misskey-js/test-d/**/*']

.github/min.node-version

@@ -1 +0,0 @@
-20.10.0

.github/misskey/test.yml

@@ -1,7 +1,5 @@
 url: 'http://misskey.local'
 
-setupPassword: example_password_please_change_this_or_you_will_get_hacked
-
 # ローカルでテストするときにポートを被らないようにするためデフォルトのものとは変える(以下同じ)
 port: 61812
 
@@ -14,4 +12,4 @@ db:
 redis:
   host: 127.0.0.1
   port: 56312
-id: aidx
+id: aid

.github/reviewer-lottery.yml

@@ -0,0 +1,9 @@
+groups:
+  - name: devs
+    reviewers: 2
+    internal_reviewers: 1
+    usernames:
+      - syuilo
+      - acid-chicken
+      - EbiseLutica
+      - tamaina

.github/workflows/api-misskey-js.yml

@@ -1,14 +1,7 @@
 name: API report (misskey.js)
 
-on:
+on: [push, pull_request]
-  push:
+
-    paths:
-      - packages/misskey-js/**
-      - .github/workflows/api-misskey-js.yml
-  pull_request:
-    paths:
-      - packages/misskey-js/**
-      - .github/workflows/api-misskey-js.yml
 jobs:
   report:
 
@@ -16,13 +9,12 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v3.3.0
 
-      - name: Setup pnpm
+      - run: corepack enable
-        uses: pnpm/action-setup@v4.1.0
 
       - name: Setup Node.js
-        uses: actions/setup-node@v4.4.0
+        uses: actions/setup-node@v3.6.0
         with:
           node-version-file: '.node-version'
           cache: 'pnpm'

.github/workflows/changelog-check.yml

@@ -1,43 +0,0 @@
-name: Check the description in CHANGELOG.md
-
-on:
-  pull_request:
-    branches:
-      - master
-      - develop
-
-jobs:
-  check-changelog:
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout head
-        uses: actions/checkout@v4.2.2
-      - name: Setup Node.js
-        uses: actions/setup-node@v4.4.0
-        with:
-          node-version-file: '.node-version'
-
-      - name: Checkout base
-        run: |
-          mkdir _base
-          cp -r .git _base/.git
-          cd _base
-          git fetch --depth 1 origin ${{ github.base_ref }}
-          git checkout origin/${{ github.base_ref }} CHANGELOG.md
-
-      - name: Copy to Checker directory for CHANGELOG-base.md
-        run: cp _base/CHANGELOG.md scripts/changelog-checker/CHANGELOG-base.md
-      - name: Copy to Checker directory for CHANGELOG-head.md
-        run: cp CHANGELOG.md scripts/changelog-checker/CHANGELOG-head.md
-      - name: diff
-        continue-on-error: true
-        run: diff -u CHANGELOG-base.md CHANGELOG-head.md
-        working-directory: scripts/changelog-checker
-
-      - name: Setup Checker
-        run: npm install
-        working-directory: scripts/changelog-checker
-      - name: Run Checker
-        run: npm run run
-        working-directory: scripts/changelog-checker

.github/workflows/check-misskey-js-autogen.yml

@@ -1,139 +0,0 @@
-name: Check Misskey JS autogen
-
-on:
-  pull_request_target:
-    branches:
-      - master
-      - develop
-      - improve-misskey-js-autogen-check
-    paths:
-      - packages/backend/**
-
-jobs:
-  # pull_request_target safety: permissions: read-all, and there are no secrets used in this job
-  generate-misskey-js:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-    if: ${{ github.event.pull_request.mergeable == null || github.event.pull_request.mergeable == true }}
-    steps:
-      - name: checkout
-        uses: actions/checkout@v4.2.2
-        with:
-          submodules: true
-          persist-credentials: false
-          ref: refs/pull/${{ github.event.pull_request.number }}/merge
-
-      - name: setup pnpm
-        uses: pnpm/action-setup@v4
-
-      - name: setup node
-        id: setup-node
-        uses: actions/setup-node@v4.4.0
-        with:
-          node-version-file: '.node-version'
-          cache: pnpm
-
-      - name: install dependencies
-        run: pnpm i --frozen-lockfile
-
-      # generate api.json
-      - name: Copy Config
-        run: cp .config/example.yml .config/default.yml
-      - name: Build
-        run: pnpm build
-      - name: Generate API JSON
-        run: pnpm --filter backend generate-api-json
-
-      # build misskey js
-      - name: Build misskey-js
-        run: |-
-          cp packages/backend/built/api.json packages/misskey-js/generator/api.json
-          pnpm run --filter misskey-js-type-generator generate
-
-      # packages/misskey-js/generator/built/autogen
-      - name: Upload Generated
-        uses: actions/upload-artifact@v4
-        with:
-          name: generated-misskey-js
-          path: packages/misskey-js/generator/built/autogen
-
-  # pull_request_target safety: permissions: read-all, and no user codes are executed
-  get-actual-misskey-js:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-    if: ${{ github.event.pull_request.mergeable == null || github.event.pull_request.mergeable == true }}
-    steps:
-      - name: checkout
-        uses: actions/checkout@v4.2.2
-        with:
-          submodules: true
-          persist-credentials: false
-          ref: refs/pull/${{ github.event.pull_request.number }}/merge
-
-      - name: Upload From Merged
-        uses: actions/upload-artifact@v4
-        with:
-          name: actual-misskey-js
-          path: packages/misskey-js/src/autogen
-
-  # pull_request_target safety: nothing is cloned from repository
-  comment-misskey-js-autogen:
-    runs-on: ubuntu-latest
-    needs: [generate-misskey-js, get-actual-misskey-js]
-    permissions:
-      pull-requests: write
-    steps:
-      - name: download generated-misskey-js
-        uses: actions/download-artifact@v4
-        with:
-          name: generated-misskey-js
-          path: misskey-js-generated
-
-      - name: download actual-misskey-js
-        uses: actions/download-artifact@v4
-        with:
-          name: actual-misskey-js
-          path: misskey-js-actual
-
-      - name: check misskey-js changes
-        id: check-changes
-        run: |
-          diff -r -u --label=generated --label=on-tree ./misskey-js-generated ./misskey-js-actual > misskey-js.diff || true
-
-          if [ -s misskey-js.diff ]; then
-            echo "changes=true" >> $GITHUB_OUTPUT
-          else
-            echo "changes=false" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Print full diff
-        run: cat ./misskey-js.diff
-
-      - name: send message
-        if: steps.check-changes.outputs.changes == 'true'
-        uses: thollander/actions-comment-pull-request@v2
-        with:
-          comment_tag: check-misskey-js-autogen
-          message: |-
-            Thank you for sending us a great Pull Request! 👍
-            Please regenerate misskey-js type definitions! 🙏
-
-            example:
-            ```sh
-            pnpm run build-misskey-js-with-types
-            ```
-
-      - name: send message
-        if: steps.check-changes.outputs.changes == 'false'
-        uses: thollander/actions-comment-pull-request@v2
-        with:
-          comment_tag: check-misskey-js-autogen
-          mode: delete
-          message: "Thank you!"
-          create_if_not_exists: false
-
-      - name: Make failure if changes are detected
-        if: steps.check-changes.outputs.changes == 'true'
-        run: exit 1

.github/workflows/check-misskey-js-version.yml

@@ -1,29 +0,0 @@
-name: Check Misskey JS version
-
-on:
-  push:
-    branches: [ develop ]
-    paths:
-      - packages/misskey-js/package.json
-      - package.json
-      - .github/workflows/check-misskey-js-version.yml
-  pull_request:
-    branches: [ develop ]
-    paths:
-      - packages/misskey-js/package.json
-      - package.json
-      - .github/workflows/check-misskey-js-version.yml
-jobs:
-  check-version:
-    # ルートの package.json と packages/misskey-js/package.json のバージョンが一致しているかを確認する
-    name: Check version
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4.2.2
-      - name: Check version
-        run: |
-          if [ "$(jq -r '.version' package.json)" != "$(jq -r '.version' packages/misskey-js/package.json)" ]; then
-            echo "Version mismatch!"
-            exit 1
-          fi

.github/workflows/check-spdx-license-id.yml

@@ -1,80 +0,0 @@
-name: Check SPDX-License-Identifier
-
-on:
-  push:
-    branches:
-      - master
-      - develop
-  pull_request:
-
-jobs:
-  check-spdx-license-id:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4.2.2
-      - name: Check
-        run: |
-          counter=0
-
-          search() {
-            local directory="$1"
-            find "$directory" -type f \
-              '(' \
-                -name "*.cjs" -and -not -name '*.config.cjs' -o \
-                -name "*.html" -o \
-                -name "*.js" -and -not -name '*.config.js' -o \
-                -name "*.mjs" -and -not -name '*.config.mjs' -o \
-                -name "*.scss" -o \
-                -name "*.ts" -and -not -name '*.config.ts' -o \
-                -name "*.vue" \
-              ')' -and \
-              -not -name '*eslint*'
-          }
-
-          check() {
-            local file="$1"
-            if ! (
-              grep -q "SPDX-FileCopyrightText: syuilo and misskey-project" "$file" ||
-              grep -q "SPDX-License-Identifier: AGPL-3.0-only" "$file"
-            ); then
-              echo "Missing: $file"
-              ((counter++))
-            fi
-          }
-
-          directories=(
-            "cypress/e2e"
-            "packages/backend/migration"
-            "packages/backend/src"
-            "packages/backend/test"
-            "packages/frontend-shared/@types"
-            "packages/frontend-shared/js"
-            "packages/frontend/.storybook"
-            "packages/frontend/@types"
-            "packages/frontend/lib"
-            "packages/frontend/public"
-            "packages/frontend/src"
-            "packages/frontend/test"
-            "packages/frontend-embed/@types"
-            "packages/frontend-embed/src"
-            "packages/icons-subsetter/src"
-            "packages/misskey-bubble-game/src"
-            "packages/misskey-reversi/src"
-            "packages/sw/src"
-            "scripts"
-          )
-
-          for directory in "${directories[@]}"; do
-            for file in $(search $directory); do
-              check "$file"
-            done
-          done
-
-          if [ $counter -gt 0 ]; then
-            echo "SPDX-License-Identifier is missing in $counter files."
-            exit 1
-          else
-            echo "SPDX-License-Identifier is certainly described in all target files!"
-            exit 0
-          fi

.github/workflows/check_copyright_year.yml

@@ -10,7 +10,7 @@ jobs:
   check_copyright_year:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.2.0
     - run: |
         if [ "$(grep Copyright COPYING | sed -e 's/.*2014-\([0-9]*\) .*/\1/g')" -ne "$(date +%Y)" ]; then
           echo "Please change copyright year!"

.github/workflows/deploy-test-environment.yml

@@ -1,84 +0,0 @@
-name: deploy-test-environment
-
-on:
-  issue_comment:
-    types: [created]
-  workflow_dispatch:
-    inputs:
-      repository:
-        description: 'Repository to deploy (optional, use the repository where this workflow is stored by default)'
-        required: false
-        default: ''
-      branch_or_hash:
-        description: 'Branch or Commit hash to deploy (optional, use the branch where this workflow is stored by default)'
-        required: false
-        default: ''
-      wait_time:
-        description: 'Time to wait in seconds (optional, 1800 seconds by default)'
-        required: false
-        default: ''
-
-jobs:
-  get-pr-ref:
-    runs-on: ubuntu-latest
-    if: github.event_name == 'issue_comment' && github.event.issue.pull_request && startsWith(github.event.comment.body, '/preview')
-    outputs:
-      is-allowed-user: ${{ steps.check-allowed-users.outputs.is-allowed-user }}
-      pr-ref: ${{ steps.get-ref.outputs.pr-ref }}
-      wait_time: ${{ steps.get-wait-time.outputs.wait_time }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4.2.2
-
-      - name: Check allowed users
-        id: check-allowed-users
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          ORG_ID: ${{ github.repository_owner_id }}
-          COMMENT_AUTHOR: ${{ github.event.comment.user.login }}
-        run: |
-          MEMBERSHIP_STATUS=$(curl -s -H "Authorization: Bearer $GITHUB_TOKEN" \
-          -H "Accept: application/vnd.github+json" \
-          -H "X-GitHub-Api-Version: 2022-11-28" \
-          "https://api.github.com/organizations/$ORG_ID/public_members/$COMMENT_AUTHOR" \
-          -o /dev/null -w '%{http_code}\n' -s)
-          if [ "$MEMBERSHIP_STATUS" -eq 204 ]; then
-            echo "is-allowed-user=true" > $GITHUB_OUTPUT
-          else
-            echo "is-allowed-user=false" > $GITHUB_OUTPUT
-          fi
-
-      - name: Get PR ref
-        id: get-ref
-        run: |
-          PR_REF="refs/pull/${{ github.event.issue.number }}/head"
-          echo "pr-ref=$PR_REF" >> $GITHUB_OUTPUT
-
-      - name: Extract wait time
-        id: get-wait-time
-        env:
-          COMMENT_BODY: ${{ github.event.comment.body }}
-        run: |
-          WAIT_TIME=$(echo "$COMMENT_BODY" | grep -oP '(?<=/preview\s)\d+' || echo "1800")
-          echo "wait_time=$WAIT_TIME" > $GITHUB_OUTPUT
-
-  deploy-test-environment-pr-comment:
-    needs: get-pr-ref
-    if: needs.get-pr-ref.outputs.is-allowed-user == 'true'
-    uses: joinmisskey/misskey-tga/.github/workflows/deploy-test-environment.yml@main
-    with:
-      repository: ${{ github.repository }}
-      branch_or_hash: ${{ needs.get-pr-ref.outputs.pr-ref }}
-      wait_time: ${{ needs.get-pr-ref.outputs.wait_time }}
-    secrets:
-      DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
-
-  deploy-test-environment-wd:
-    if: github.event_name == 'workflow_dispatch'
-    uses: joinmisskey/misskey-tga/.github/workflows/deploy-test-environment.yml@main
-    with:
-      repository: ${{ inputs.repository || github.repository }}
-      branch_or_hash: ${{ inputs.branch_or_hash || github.ref_name }}
-      wait_time: ${{ inputs.wait_time || '1800' }}
-    secrets:
-      DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}

.github/workflows/docker-develop.yml

@@ -6,83 +6,38 @@ on:
       - develop
   workflow_dispatch:
 
-env:
-  REGISTRY_IMAGE: misskey/misskey
-
 jobs:
-  # see https://docs.docker.com/build/ci/github-actions/multi-platform/#distribute-build-across-multiple-runners
+  push_to_registry:
-  build:
+    name: Push Docker image to Docker Hub
-    name: Build
     runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        platform:
-          - linux/amd64
-          - linux/arm64
     if: github.repository == 'misskey-dev/misskey'
     steps:
-      - name: Prepare
-        run: |
-          platform=${{ matrix.platform }}
-          echo "PLATFORM_PAIR=${platform//\//-}" >> $GITHUB_ENV
       - name: Check out the repo
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v3.3.0
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
+        id: buildx
+        uses: docker/setup-buildx-action@v2.3.0
+        with:
+          platforms: linux/amd64,linux/arm64
+      - name: Docker meta
+        id: meta
+        uses: docker/metadata-action@v4
+        with:
+          images: misskey/misskey
       - name: Log in to Docker Hub
-        uses: docker/login-action@v3
+        uses: docker/login-action@v2
         with:
           username: ${{ secrets.DOCKER_USERNAME }}
           password: ${{ secrets.DOCKER_PASSWORD }}
-      - name: Build and push by digest
+      - name: Build and Push to Docker Hub
-        id: build
+        uses: docker/build-push-action@v4
-        uses: docker/build-push-action@v6
         with:
+          builder: ${{ steps.buildx.outputs.name }}
           context: .
           push: true
-          platforms: ${{ matrix.platform }}
+          platforms: ${{ steps.buildx.outputs.platforms }}
           provenance: false
+          tags: misskey/misskey:develop
           labels: develop
           cache-from: type=gha
           cache-to: type=gha,mode=max
-          outputs: type=image,name=${{ env.REGISTRY_IMAGE }},push-by-digest=true,name-canonical=true,push=true
-      - name: Export digest
-        run: |
-          mkdir -p /tmp/digests
-          digest="${{ steps.build.outputs.digest }}"
-          touch "/tmp/digests/${digest#sha256:}"
-      - name: Upload digest
-        uses: actions/upload-artifact@v4
-        with:
-          name: digests-${{ env.PLATFORM_PAIR }}
-          path: /tmp/digests/*
-          if-no-files-found: error
-          retention-days: 1
-
-  merge:
-    runs-on: ubuntu-latest
-    needs:
-      - build
-    steps:
-      - name: Download digests
-        uses: actions/download-artifact@v4
-        with:
-          path: /tmp/digests
-          pattern: digests-*
-          merge-multiple: true
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-      - name: Create manifest list and push
-        working-directory: /tmp/digests
-        run: |
-          docker buildx imagetools create --tag ${{ env.REGISTRY_IMAGE }}:develop \
-            $(printf '${{ env.REGISTRY_IMAGE }}@sha256:%s ' *)
-      - name: Inspect image
-        run: |
-          docker buildx imagetools inspect ${{ env.REGISTRY_IMAGE }}:develop

.github/workflows/docker.yml

@@ -5,101 +5,45 @@ on:
     types: [published]
   workflow_dispatch:
 
-env:
-  REGISTRY_IMAGE: misskey/misskey
-  TAGS: |
-    type=edge
-    type=ref,event=pr
-    type=ref,event=branch
-    type=semver,pattern={{version}}
-    type=semver,pattern={{major}}.{{minor}}
-    type=semver,pattern={{major}}
-
 jobs:
-  # see https://docs.docker.com/build/ci/github-actions/multi-platform/#distribute-build-across-multiple-runners
+  push_to_registry:
-  build:
+    name: Push Docker image to Docker Hub
-    name: Build
     runs-on: ubuntu-latest
-    strategy:
+
-      fail-fast: false
-      matrix:
-        platform:
-          - linux/amd64
-          - linux/arm64
     steps:
-      - name: Prepare
-        run: |
-          platform=${{ matrix.platform }}
-          echo "PLATFORM_PAIR=${platform//\//-}" >> $GITHUB_ENV
       - name: Check out the repo
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v3.3.0
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
+        id: buildx
+        uses: docker/setup-buildx-action@v2.3.0
+        with:
+          platforms: linux/amd64,linux/arm64
       - name: Docker meta
         id: meta
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@v4
         with:
-          images: ${{ env.REGISTRY_IMAGE }}
+          images: misskey/misskey
-          tags: ${{ env.TAGS }}
+          tags: |
+            type=edge
+            type=ref,event=pr
+            type=ref,event=branch
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
       - name: Log in to Docker Hub
-        uses: docker/login-action@v3
+        uses: docker/login-action@v2
         with:
           username: ${{ secrets.DOCKER_USERNAME }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Build and Push to Docker Hub
-        id: build
+        uses: docker/build-push-action@v4
-        uses: docker/build-push-action@v6
         with:
+          builder: ${{ steps.buildx.outputs.name }}
           context: .
           push: true
-          platforms: ${{ matrix.platform }}
+          platforms: ${{ steps.buildx.outputs.platforms }}
           provenance: false
+          tags: ${{ steps.meta.outputs.tags }}
           labels: ${{ steps.meta.outputs.labels }}
           cache-from: type=gha
           cache-to: type=gha,mode=max
-          outputs: type=image,name=${{ env.REGISTRY_IMAGE }},push-by-digest=true,name-canonical=true,push=true
-      - name: Export digest
-        run: |
-          mkdir -p /tmp/digests
-          digest="${{ steps.build.outputs.digest }}"
-          touch "/tmp/digests/${digest#sha256:}"
-      - name: Upload digest
-        uses: actions/upload-artifact@v4
-        with:
-          name: digests-${{ env.PLATFORM_PAIR }}
-          path: /tmp/digests/*
-          if-no-files-found: error
-          retention-days: 1
-
-  merge:
-    runs-on: ubuntu-latest
-    needs:
-      - build
-    steps:
-      - name: Download digests
-        uses: actions/download-artifact@v4
-        with:
-          path: /tmp/digests
-          pattern: digests-*
-          merge-multiple: true
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-      - name: Docker meta
-        id: meta
-        uses: docker/metadata-action@v5
-        with:
-          images: ${{ env.REGISTRY_IMAGE }}
-          tags: ${{ env.TAGS }}
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-      - name: Create manifest list and push
-        working-directory: /tmp/digests
-        run: |
-          docker buildx imagetools create $(jq -cr '.tags | map("-t " + .) | join(" ")' <<< "$DOCKER_METADATA_OUTPUT_JSON") \
-            $(printf '${{ env.REGISTRY_IMAGE }}@sha256:%s ' *)
-      - name: Inspect image
-        run: |
-          docker buildx imagetools inspect ${{ env.REGISTRY_IMAGE }}:${{ steps.meta.outputs.version }}

.github/workflows/dockle.yml

@@ -13,16 +13,14 @@ jobs:
     runs-on: ubuntu-latest
     env:
       DOCKER_CONTENT_TRUST: 1
-      DOCKLE_VERSION: 0.4.14
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v3.2.0
-      - name: Download and install dockle v${{ env.DOCKLE_VERSION }}
+      - run: |
-        run: |
+          curl -L -o dockle.deb "https://github.com/goodwithtech/dockle/releases/download/v0.4.10/dockle_0.4.10_Linux-64bit.deb"
-          curl -L -o dockle.deb "https://github.com/goodwithtech/dockle/releases/download/v${DOCKLE_VERSION}/dockle_${DOCKLE_VERSION}_Linux-64bit.deb"
           sudo dpkg -i dockle.deb
       - run: |
           cp .config/docker_example.env .config/docker.env
-          cp ./compose_example.yml ./compose.yml
+          cp ./docker-compose.yml.example ./docker-compose.yml
       - run: |
           docker compose up -d web
           docker tag "$(docker compose images web | awk 'OFS=":" {print $4}' | tail -n +2)" misskey-web:latest

.github/workflows/get-api-diff.yml

@@ -1,67 +0,0 @@
-# this name is used in report-api-diff.yml so be careful when change name
-name: Get api.json from Misskey
-
-on:
-  pull_request:
-    branches:
-      - master
-      - develop
-    paths:
-      - packages/backend/**
-      - .github/workflows/get-api-diff.yml
-jobs:
-  get-from-misskey:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-
-    strategy:
-      matrix:
-        api-json-name: [api-base.json, api-head.json]
-        include:
-          - api-json-name: api-base.json
-            ref: ${{ github.base_ref }}
-          - api-json-name: api-head.json
-            ref: refs/pull/${{ github.event.number }}/merge
-
-    steps:
-    - uses: actions/checkout@v4.2.2
-      with:
-        ref: ${{ matrix.ref }}
-        submodules: true
-    - name: Setup pnpm
-      uses: pnpm/action-setup@v4.1.0
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - run: pnpm i --frozen-lockfile
-    - name: Check pnpm-lock.yaml
-      run: git diff --exit-code pnpm-lock.yaml
-    - name: Copy Configure
-      run: cp .config/example.yml .config/default.yml
-    - name: Build
-      run: pnpm build
-    - name: Generate API JSON
-      run: pnpm --filter backend generate-api-json
-    - name: Copy API.json
-      run: cp packages/backend/built/api.json ${{ matrix.api-json-name }}
-    - name: Upload Artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: api-artifact-${{ matrix.api-json-name }}
-        path: ${{ matrix.api-json-name }}
-
-  save-pr-number:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Save PR number
-        env:
-          PR_NUMBER: ${{ github.event.number }}
-        run: |
-          echo "$PR_NUMBER" > ./pr_number
-      - uses: actions/upload-artifact@v4
-        with:
-          name: api-artifact-pr-number
-          path: pr_number

.github/workflows/labeler.yml

@@ -11,6 +11,6 @@ jobs:
       pull-requests: write
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/labeler@v5
+    - uses: actions/labeler@v4
       with:
         repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/lint.yml

@@ -5,45 +5,25 @@ on:
     branches:
       - master
       - develop
-    paths:
-      - packages/backend/**
-      - packages/frontend/**
-      - packages/frontend-shared/**
-      - packages/frontend-embed/**
-      - packages/icons-subsetter/**
-      - packages/sw/**
-      - packages/misskey-js/**
-      - packages/misskey-bubble-game/**
-      - packages/misskey-reversi/**
-      - packages/shared/eslint.config.js
-      - .github/workflows/lint.yml
   pull_request:
-    paths:
+
-      - packages/backend/**
-      - packages/frontend/**
-      - packages/frontend-shared/**
-      - packages/frontend-embed/**
-      - packages/icons-subsetter/**
-      - packages/sw/**
-      - packages/misskey-js/**
-      - packages/misskey-bubble-game/**
-      - packages/misskey-reversi/**
-      - packages/shared/eslint.config.js
-      - .github/workflows/lint.yml
 jobs:
   pnpm_install:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         fetch-depth: 0
         submodules: true
-    - name: Setup pnpm
+    - uses: pnpm/action-setup@v2
-      uses: pnpm/action-setup@v4.1.0
+      with:
-    - uses: actions/setup-node@v4.4.0
+        version: 8
+        run_install: false
+    - uses: actions/setup-node@v3.6.0
       with:
         node-version-file: '.node-version'
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
 
   lint:
@@ -55,35 +35,24 @@ jobs:
         workspace:
         - backend
         - frontend
-        - frontend-shared
-        - frontend-embed
-        - icons-subsetter
         - sw
         - misskey-js
-        - misskey-bubble-game
-        - misskey-reversi
-    env:
-      eslint-cache-version: v1
-      eslint-cache-path: ${{ github.workspace }}/node_modules/.cache/eslint-${{ matrix.workspace }}
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         fetch-depth: 0
         submodules: true
-    - name: Setup pnpm
+    - uses: pnpm/action-setup@v2
-      uses: pnpm/action-setup@v4.1.0
+      with:
-    - uses: actions/setup-node@v4.4.0
+        version: 7
+        run_install: false
+    - uses: actions/setup-node@v3.6.0
       with:
         node-version-file: '.node-version'
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
-    - name: Restore eslint cache
+    - run: pnpm --filter ${{ matrix.workspace }} run eslint
-      uses: actions/cache@v4.2.3
-      with:
-        path: ${{ env.eslint-cache-path }}
-        key: eslint-${{ env.eslint-cache-version }}-${{ matrix.workspace }}-${{ hashFiles('**/pnpm-lock.yaml') }}-${{ github.ref_name }}-${{ github.sha }}
-        restore-keys: eslint-${{ env.eslint-cache-version }}-${{ matrix.workspace }}-${{ hashFiles('**/pnpm-lock.yaml') }}-
-    - run: pnpm --filter ${{ matrix.workspace }} run eslint --cache --cache-location ${{ env.eslint-cache-path }} --cache-strategy content
 
   typecheck:
     needs: [pnpm_install]
@@ -93,22 +62,20 @@ jobs:
       matrix:
         workspace:
         - backend
-        - sw
         - misskey-js
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         fetch-depth: 0
         submodules: true
-    - name: Setup pnpm
+    - uses: pnpm/action-setup@v2
-      uses: pnpm/action-setup@v4.1.0
+      with:
-    - uses: actions/setup-node@v4.4.0
+        version: 7
+        run_install: false
+    - uses: actions/setup-node@v3.6.0
       with:
         node-version-file: '.node-version'
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
-    - run: pnpm --filter misskey-js run build
-      if: ${{ matrix.workspace == 'backend' || matrix.workspace == 'sw' }}
-    - run: pnpm --filter misskey-reversi run build
-      if: ${{ matrix.workspace == 'backend' }}
     - run: pnpm --filter ${{ matrix.workspace }} run typecheck

.github/workflows/locale.yml

@@ -1,28 +0,0 @@
-name: Lint
-
-on:
-  push:
-    paths:
-      - locales/**
-      - .github/workflows/locale.yml
-  pull_request:
-    paths:
-      - locales/**
-      - .github/workflows/locale.yml
-jobs:
-  locale_verify:
-    runs-on: ubuntu-latest
-    continue-on-error: true
-    steps:
-    - uses: actions/checkout@v4.2.2
-      with:
-        fetch-depth: 0
-        submodules: true
-    - name: Setup pnpm
-      uses: pnpm/action-setup@v4.1.0
-    - uses: actions/setup-node@v4.4.0
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - run: pnpm i --frozen-lockfile
-    - run: cd locales && node verify.js

.github/workflows/ok-to-test.yml

@@ -0,0 +1,36 @@
+# If someone with write access comments "/ok-to-test" on a pull request, emit a repository_dispatch event
+name: Ok To Test
+
+on:
+  issue_comment:
+    types: [created]
+
+jobs:
+  ok-to-test:
+    runs-on: ubuntu-latest
+    # Only run for PRs, not issue comments
+    if: ${{ github.event.issue.pull_request }}
+    steps:
+    # Generate a GitHub App installation access token from an App ID and private key
+    # To create a new GitHub App:
+    #   https://developer.github.com/apps/building-github-apps/creating-a-github-app/
+    # See app.yml for an example app manifest
+    - name: Generate token
+      id: generate_token
+      uses: tibdex/github-app-token@v1
+      with:
+        app_id: ${{ secrets.DEPLOYBOT_APP_ID }}
+        private_key: ${{ secrets.DEPLOYBOT_PRIVATE_KEY }}
+
+    - name: Slash Command Dispatch
+      uses: peter-evans/slash-command-dispatch@v1
+      env:
+        TOKEN: ${{ steps.generate_token.outputs.token }}
+      with:
+        token: ${{ env.TOKEN }} # GitHub App installation access token
+        # token: ${{ secrets.PERSONAL_ACCESS_TOKEN }} # PAT or OAuth token will also work
+        reaction-token: ${{ secrets.GITHUB_TOKEN }}
+        issue-type: pull-request
+        commands: deploy
+        named-args: true
+        permission: write

.github/workflows/on-release-created.yml

@@ -1,36 +0,0 @@
-name: On Release Created (Publish misskey-js)
-
-on:
-  release:
-    types: [created]
-
-  workflow_dispatch:
-
-jobs:
-  publish-misskey-js:
-    name: Publish misskey-js
-    runs-on: ubuntu-latest
-
-    permissions:
-      contents: read
-      id-token: write
-
-    steps:
-      - uses: actions/checkout@v4.2.2
-        with:
-          submodules: true
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4.1.0
-      - name: Use Node.js
-        uses: actions/setup-node@v4.4.0
-        with:
-          node-version-file: '.node-version'
-          cache: 'pnpm'
-      - name: Publish package
-        run: |
-          pnpm i --frozen-lockfile
-          pnpm build
-          pnpm --filter misskey-js publish --access public --no-git-checks --provenance
-        env:
-          NODE_AUTH_TOKEN: ${{ secrets.NODE_AUTH_TOKEN }}
-          NPM_TOKEN: ${{ secrets.NODE_AUTH_TOKEN }}

.github/workflows/pr-preview-deploy.yml

@@ -0,0 +1,92 @@
+# Run secret-dependent integration tests only after /deploy approval
+on:
+  repository_dispatch:
+    types: [deploy-command]
+
+name: Deploy preview environment
+
+jobs:
+  # Repo owner has commented /deploy on a (fork-based) pull request
+  deploy-preview-environment:
+    runs-on: ubuntu-latest
+    if:
+      github.event.client_payload.slash_command.sha != '' &&
+      contains(github.event.client_payload.pull_request.head.sha, github.event.client_payload.slash_command.sha)
+    steps:
+    - uses: actions/github-script@v6.3.3
+      id: check-id
+      env:
+        number: ${{ github.event.client_payload.pull_request.number }}
+        job: ${{ github.job }}
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        result-encoding: string
+        script: |
+          const { data: pull } = await github.rest.pulls.get({
+            ...context.repo,
+            pull_number: process.env.number
+          });
+          const ref = pull.head.sha;
+
+          const { data: checks } = await github.rest.checks.listForRef({
+            ...context.repo,
+            ref
+          });
+
+          const check = checks.check_runs.filter(c => c.name === process.env.job);
+
+          return check[0].id;
+
+    - uses: actions/github-script@v6.3.3
+      env:
+        check_id: ${{ steps.check-id.outputs.result }}
+        details_url: ${{ github.server_url }}/${{ github.repository }}/runs/${{ github.run_id }}
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        script: |
+          await github.rest.checks.update({
+            ...context.repo,
+            check_run_id: process.env.check_id,
+            status: 'in_progress',
+            details_url: process.env.details_url
+          });
+
+    # Check out merge commit
+    - name: Fork based /deploy checkout
+      uses: actions/checkout@v3.3.0
+      with:
+        ref: 'refs/pull/${{ github.event.client_payload.pull_request.number }}/merge'
+
+    # <insert integration tests needing secrets>
+    - name: Context
+      uses: okteto/context@latest
+      with:
+        token: ${{ secrets.OKTETO_TOKEN }}
+
+    - name: Deploy preview environment
+      uses: ikuradon/deploy-preview@latest
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        name: pr-${{ github.event.client_payload.pull_request.number }}-syuilo
+        timeout: 15m
+
+    # Update check run called "integration-fork"
+    - uses: actions/github-script@v6.3.3
+      id: update-check-run
+      if: ${{ always() }}
+      env:
+        # Conveniently, job.status maps to https://developer.github.com/v3/checks/runs/#update-a-check-run
+        conclusion: ${{ job.status }}
+        check_id: ${{ steps.check-id.outputs.result }}
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        script: |
+          const { data: result } = await github.rest.checks.update({
+            ...context.repo,
+            check_run_id: process.env.check_id,
+            status: 'completed',
+            conclusion: process.env.conclusion
+          });
+
+          return result;

.github/workflows/pr-preview-destroy.yml

@@ -0,0 +1,54 @@
+# file: .github/workflows/preview-closed.yaml
+on:
+  pull_request:
+    types:
+      - closed
+
+name: Destroy preview environment
+
+jobs:
+  destroy-preview-environment:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6.3.3
+        id: check-conclusion
+        env:
+          number: ${{ github.event.number }}
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          result-encoding: string
+          script: |
+            const { data: pull } = await github.rest.pulls.get({
+              ...context.repo,
+              pull_number: process.env.number
+            });
+            const ref = pull.head.sha;
+
+            const { data: checks } = await github.rest.checks.listForRef({
+              ...context.repo,
+              ref
+            });
+
+            const check = checks.check_runs.filter(c => c.name === 'deploy-preview-environment');
+
+            if (check.length === 0) {
+              return;
+            }
+
+            const { data: result } = await github.rest.checks.get({
+              ...context.repo,
+              check_run_id: check[0].id,
+            });
+
+            return result.conclusion;
+      - name: Context
+        if: steps.check-conclusion.outputs.result == 'success'
+        uses: okteto/context@latest
+        with:
+          token: ${{ secrets.OKTETO_TOKEN }}
+
+      - name: Destroy preview environment
+        if: steps.check-conclusion.outputs.result == 'success'
+        uses: okteto/destroy-preview@latest
+        with:
+          name: pr-${{ github.event.number }}-syuilo

.github/workflows/release-edit-with-push.yml

@@ -1,48 +0,0 @@
-name: "Release Manager: sync changelog with PR"
-
-on:
-  push:
-    branches:
-      - develop
-    paths:
-      - 'CHANGELOG.md'
-
-env:
-  GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-permissions:
-  contents: write
-  issues: write
-  pull-requests: write
-
-jobs:
-  edit:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      # headが$GITHUB_REF_NAME, baseが$STABLE_BRANCHかつopenのPRを1つ取得
-      - name: Get PR
-        run: |
-          echo "pr_number=$(gh pr list --limit 1 --search "head:$GITHUB_REF_NAME base:$STABLE_BRANCH is:open" --json number  --jq '.[] | .number')" >> $GITHUB_OUTPUT
-        id: get_pr
-        env:
-          STABLE_BRANCH: ${{ vars.STABLE_BRANCH }}
-      - name: Get target version
-        if: steps.get_pr.outputs.pr_number != ''
-        uses: misskey-dev/release-manager-actions/.github/actions/get-target-version@v2
-        id: v
-      # CHANGELOG.mdの内容を取得
-      - name: Get changelog
-        if: steps.get_pr.outputs.pr_number != ''
-        uses: misskey-dev/release-manager-actions/.github/actions/get-changelog@v2
-        with:
-          version: ${{ steps.v.outputs.target_version }}
-        id: changelog
-      # PRのnotesを更新
-      - name: Update PR
-        if: steps.get_pr.outputs.pr_number != ''
-        run: |
-          gh pr edit "$PR_NUMBER" --body "$CHANGELOG"
-        env:
-          PR_NUMBER: ${{ steps.get_pr.outputs.pr_number }}
-          CHANGELOG: ${{ steps.changelog.outputs.changelog }}

.github/workflows/release-with-dispatch.yml

@@ -1,136 +0,0 @@
-name: "Release Manager [Dispatch]"
-
-on:
-  workflow_dispatch:
-    inputs:
-      ## Specify the type of the next release.
-      #version_increment_type:
-      #  type: choice
-      #  description: 'VERSION INCREMENT TYPE'
-      #  default: 'patch'
-      #  required: false
-      #  options:
-      #    - 'major'
-      #    - 'minor'
-      #    - 'patch'
-      merge:
-        type: boolean
-        description: 'MERGE RELEASE BRANCH TO MAIN'
-        default: false
-      start-rc:
-        type: boolean
-        description: 'Start Release Candidate'
-        default: false
-
-env:
-  GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-permissions:
-  contents: write
-  issues: write
-  pull-requests: write
-
-jobs:
-  get-pr:
-    runs-on: ubuntu-latest
-    outputs:
-      pr_number: ${{ steps.get_pr.outputs.pr_number }}
-    steps:
-      - uses: actions/checkout@v4
-      # headが$GITHUB_REF_NAME, baseが$STABLE_BRANCHかつopenのPRを1つ取得
-      - name: Get PRs
-        run: |
-          echo "pr_number=$(gh pr list --limit 1 --search "head:$GITHUB_REF_NAME base:$STABLE_BRANCH is:open" --json number  --jq '.[] | .number')" >> $GITHUB_OUTPUT
-        id: get_pr
-        env:
-          STABLE_BRANCH: ${{ vars.STABLE_BRANCH }}
-
-  merge:
-    uses: misskey-dev/release-manager-actions/.github/workflows/merge.yml@v2
-    needs: get-pr
-    if: ${{ needs.get-pr.outputs.pr_number != '' && inputs.merge == true }}
-    with:
-      pr_number: ${{ needs.get-pr.outputs.pr_number }}
-      user: 'github-actions[bot]'
-      package_jsons_to_rewrite: ${{ vars.PACKAGE_JSONS_TO_REWRITE }}
-      # Text to prepend to the changelog
-      # The first line must be `## Unreleased`
-      changes_template: |
-        ## Unreleased
-
-        ### General
-        -
-
-        ### Client
-        -
-
-        ### Server
-        -
-
-      use_external_app_to_release: ${{ vars.USE_RELEASE_APP == 'true' }}
-      indent: ${{ vars.INDENT }}
-    secrets:
-      RELEASE_APP_ID: ${{ secrets.RELEASE_APP_ID }}
-      RELEASE_APP_PRIVATE_KEY: ${{ secrets.RELEASE_APP_PRIVATE_KEY }}
-
-  create-prerelease:
-    uses: misskey-dev/release-manager-actions/.github/workflows/create-prerelease.yml@v2
-    needs: get-pr
-    if: ${{ needs.get-pr.outputs.pr_number != '' && inputs.merge != true  }}
-    with:
-      pr_number: ${{ needs.get-pr.outputs.pr_number }}
-      user: 'github-actions[bot]'
-      package_jsons_to_rewrite: ${{ vars.PACKAGE_JSONS_TO_REWRITE }}
-      use_external_app_to_release: ${{ vars.USE_RELEASE_APP == 'true' }}
-      indent: ${{ vars.INDENT }}
-      draft_prerelease_channel: alpha
-      ready_start_prerelease_channel: beta
-      prerelease_channel: ${{ inputs.start-rc && 'rc' || '' }}
-      reset_number_on_channel_change: true
-    secrets:
-      RELEASE_APP_ID: ${{ secrets.RELEASE_APP_ID }}
-      RELEASE_APP_PRIVATE_KEY: ${{ secrets.RELEASE_APP_PRIVATE_KEY }}
-
-  create-target:
-    uses: misskey-dev/release-manager-actions/.github/workflows/create-target.yml@v2
-    needs: get-pr
-    if: ${{ needs.get-pr.outputs.pr_number == '' }}
-    with:
-      user: 'github-actions[bot]'
-      # The script for version increment.
-      # process.env.CURRENT_VERSION: The current version.
-      #
-      # Misskey calender versioning (yyyy.MM.patch) example
-      version_increment_script: |
-        const now = new Date();
-        const year = now.toLocaleDateString('en-US', { year: 'numeric', timeZone: 'Asia/Tokyo' });
-        const month = now.toLocaleDateString('en-US', { month: 'numeric', timeZone: 'Asia/Tokyo' });
-        const [major, minor, _patch] = process.env.CURRENT_VERSION.split('.');
-        const patch = Number(_patch.split('-')[0]);
-        if (Number.isNaN(patch)) {
-          console.error('Invalid patch version', year, month, process.env.CURRENT_VERSION, major, minor, _patch);
-          throw new Error('Invalid patch version');
-        }
-        if (year !== major || month !== minor) {
-          return `${year}.${month}.0`;
-        } else {
-          return `${major}.${minor}.${patch + 1}`;
-        }
-      ##Semver example
-      #version_increment_script: |
-      #  const [major, minor, patch] = process.env.CURRENT_VERSION.split('.');
-      #  if ("${{ inputs.version_increment_type }}" === "major") {
-      #    return `${Number(major) + 1}.0.0`;
-      #  } else if ("${{ inputs.version_increment_type }}" === "minor") {
-      #    return `${major}.${Number(minor) + 1}.0`;
-      #  } else {
-      #    return `${major}.${minor}.${Number(patch) + 1}`;
-      #  }
-      package_jsons_to_rewrite: ${{ vars.PACKAGE_JSONS_TO_REWRITE }}
-      use_external_app_to_release: ${{ vars.USE_RELEASE_APP == 'true' }}
-      indent: ${{ vars.INDENT }}
-      stable_branch: ${{ vars.STABLE_BRANCH }}
-      draft_prerelease_channel: alpha
-    secrets:
-      RELEASE_APP_ID: ${{ secrets.RELEASE_APP_ID }}
-      RELEASE_APP_PRIVATE_KEY: ${{ secrets.RELEASE_APP_PRIVATE_KEY }}

.github/workflows/report-api-diff.yml

@@ -1,104 +0,0 @@
-name: Report API Diff
-
-on:
-  workflow_run:
-    types: [completed]
-    workflows:
-      - Get api.json from Misskey # get-api-diff.yml
-
-jobs:
-  compare-diff:
-    runs-on: ubuntu-latest
-    if: ${{ github.event.workflow_run.conclusion == 'success' }}
-    permissions:
-      pull-requests: write
-
-# api-artifact
-    steps:
-      - name: Download artifact
-        uses: actions/github-script@v7.0.1
-        with:
-          script: |
-            const fs = require('fs');
-            let allArtifacts = await github.rest.actions.listWorkflowRunArtifacts({
-               owner: context.repo.owner,
-               repo: context.repo.repo,
-               run_id: context.payload.workflow_run.id,
-            });
-            let matchArtifacts = allArtifacts.data.artifacts.filter((artifact) => {
-              return artifact.name.startsWith("api-artifact-") || artifact.name == "api-artifact"
-            });
-            await Promise.all(matchArtifacts.map(async (artifact) => {
-              let download = await github.rest.actions.downloadArtifact({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                artifact_id: artifact.id,
-                archive_format: 'zip',
-              });
-              await fs.promises.writeFile(`${process.env.GITHUB_WORKSPACE}/${artifact.name}.zip`, Buffer.from(download.data));
-            }));
-      - name: Extract all artifacts
-        run: |
-          find . -mindepth 1 -maxdepth 1 -type f -name '*.zip' -exec unzip {} -d artifacts ';'
-          ls -la
-      - name: Load PR Number
-        id: load-pr-num
-        run: echo "pr-number=$(cat artifacts/pr_number)" >> "$GITHUB_OUTPUT"
-
-      - name: Output base
-        run: cat ./artifacts/api-base.json
-      - name: Output head
-        run: cat ./artifacts/api-head.json
-      - name: Arrange json files
-        run: |
-          jq '.' ./artifacts/api-base.json > ./api-base.json
-          jq '.' ./artifacts/api-head.json > ./api-head.json
-      - name: Get diff of 2 files
-        run: diff -u --label=base --label=head ./api-base.json ./api-head.json | cat > api.json.diff
-      - name: Get full diff
-        run: diff --label=base --label=head --new-line-format='+%L' --old-line-format='-%L' --unchanged-line-format=' %L' ./api-base.json ./api-head.json | cat > api-full.json.diff
-      - name: Echo full diff
-        run: cat ./api-full.json.diff
-      - name: Upload full diff to Artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: api-artifact
-          path: |
-            api-full.json.diff
-            api-base.json
-            api-head.json
-      - id: out-diff
-        name: Build diff Comment
-        run: |
-          HEADER="このPRによるapi.jsonの差分"
-          FOOTER="[Get diff files from Workflow Page](https://github.com/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID})"
-          DIFF_BYTES="$(stat ./api.json.diff -c '%s' | tr -d '\n')"
-          
-          echo "$HEADER" > ./output.md
-          
-          if (( "$DIFF_BYTES" <= 1 )); then
-            echo '差分はありません。' >> ./output.md
-          else
-            echo '<details>' >> ./output.md
-            echo '<summary>差分はこちら</summary>' >> ./output.md
-            echo >> ./output.md
-            echo '```diff' >> ./output.md
-            cat ./api.json.diff >> ./output.md
-            echo '```' >> ./output.md
-            echo '</details>' >> .output.md
-          fi
-          
-          echo "$FOOTER" >> ./output.md
-      - uses: thollander/actions-comment-pull-request@v2
-        with:
-          pr_number: ${{ steps.load-pr-num.outputs.pr-number }}
-          comment_tag: show_diff
-          filePath: ./output.md
-      - name: Tell error to PR
-        uses: thollander/actions-comment-pull-request@v2
-        if: failure() && steps.load-pr-num.outputs.pr-number
-        with:
-          pr_number: ${{ steps.load-pr-num.outputs.pr-number }}
-          comment_tag: show_diff_error
-          message: |
-            api.jsonの差分作成中にエラーが発生しました。詳細は[Workflowのログ](https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }})を確認してください。

.github/workflows/reviewer_lottery.yml

@@ -0,0 +1,13 @@
+name: "Reviewer lottery"
+on:
+  pull_request_target:
+    types: [opened, ready_for_review, reopened]
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v1
+    - uses: uesteibar/reviewer-lottery@v2
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/storybook.yml

@@ -6,28 +6,21 @@ on:
       - master
       - develop
   pull_request_target:
-    branches-ignore:
-      # Since pull requests targets master mostly is the "develop" branch.
-      # Storybook CI is checked on the "push" event of "develop" branch so it would cause a duplicate build.
-      # This is a waste of chromatic build quota, so we don't run storybook CI on pull requests targets master.
-      - master
 
 jobs:
   build:
-    # Chromatic is not likely to be available for fork repositories, so we disable for fork repositories.
-    if: github.repository == 'misskey-dev/misskey'
     runs-on: ubuntu-latest
 
     env:
       NODE_OPTIONS: "--max_old_space_size=7168"
 
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       if: github.event_name != 'pull_request_target'
       with:
         fetch-depth: 0
         submodules: true
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       if: github.event_name == 'pull_request_target'
       with:
         fetch-depth: 0
@@ -35,19 +28,26 @@ jobs:
         ref: "refs/pull/${{ github.event.number }}/merge"
     - name: Checkout actual HEAD
       if: github.event_name == 'pull_request_target'
-      run: git checkout "$(git rev-list --parents -n1 HEAD | cut -d" " -f3)"
+      id: rev
-    - name: Setup pnpm
+      run: |
-      uses: pnpm/action-setup@v4.1.0
+        echo "base=$(git rev-list --parents -n1 HEAD | cut -d" " -f2)" >> $GITHUB_OUTPUT
-    - name: Use Node.js
+        git checkout $(git rev-list --parents -n1 HEAD | cut -d" " -f3)
-      uses: actions/setup-node@v4.4.0
+    - name: Install pnpm
+      uses: pnpm/action-setup@v2
+      with:
+        version: 8
+        run_install: false
+    - name: Use Node.js 18.x
+      uses: actions/setup-node@v3.6.0
       with:
         node-version-file: '.node-version'
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
     - name: Check pnpm-lock.yaml
       run: git diff --exit-code pnpm-lock.yaml
-    - name: Build dependent packages
+    - name: Build misskey-js
-      run: pnpm -F misskey-js -F misskey-bubble-game -F misskey-reversi build
+      run: pnpm --filter misskey-js build
     - name: Build storybook
       run: pnpm --filter frontend build-storybook
     - name: Publish to Chromatic
@@ -78,19 +78,23 @@ jobs:
       if: github.event_name == 'pull_request_target'
       id: chromatic_pull_request
       run: |
-        CHROMATIC_PARAMETER="$(node packages/frontend/.storybook/changes.js $(git diff --name-only origin/${GITHUB_BASE_REF}...origin/${GITHUB_HEAD_REF} | xargs))"
+        DIFF="${{ steps.rev.outputs.base }} HEAD"
+        if [ "$DIFF" = "0000000000000000000000000000000000000000 HEAD" ]; then
+          DIFF="HEAD"
+        fi
+        CHROMATIC_PARAMETER="$(node packages/frontend/.storybook/changes.js $(git diff-tree --no-commit-id --name-only -r $(echo "$DIFF") | xargs))"
         if [ "$CHROMATIC_PARAMETER" = " --skip" ]; then
           echo "skip=true" >> $GITHUB_OUTPUT
         fi
-        BRANCH="${{ github.event.pull_request.head.user.login }}:$GITHUB_HEAD_REF"
+        BRANCH="${{ github.event.pull_request.head.user.login }}:${{ github.event.pull_request.head.ref }}"
-        if [ "$BRANCH" = "misskey-dev:$GITHUB_HEAD_REF" ]; then
+        if [ "$BRANCH" = "misskey-dev:${{ github.event.pull_request.head.ref }}" ]; then
-          BRANCH="$GITHUB_HEAD_REF"
+          BRANCH="${{ github.event.pull_request.head.ref }}"
         fi
-        pnpm --filter frontend chromatic --exit-once-uploaded -d storybook-static --branch-name "$BRANCH" $(echo "$CHROMATIC_PARAMETER")
+        pnpm --filter frontend chromatic --exit-once-uploaded -d storybook-static --branch-name $BRANCH $(echo "$CHROMATIC_PARAMETER")
       env:
         CHROMATIC_PROJECT_TOKEN: ${{ secrets.CHROMATIC_PROJECT_TOKEN }}
     - name: Notify that Chromatic detects changes
-      uses: actions/github-script@v7.0.1
+      uses: actions/github-script@v6.4.0
       if: github.event_name != 'pull_request_target' && steps.chromatic_push.outputs.success == 'false'
       with:
         github-token: ${{ secrets.GITHUB_TOKEN }}
@@ -102,7 +106,7 @@ jobs:
             body: 'Chromatic detects changes. Please [review the changes on Chromatic](https://www.chromatic.com/builds?appId=6428f7d7b962f0b79f97d6e4).'
           })
     - name: Upload Artifacts
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         name: storybook
         path: packages/frontend/storybook-static

.github/workflows/test-backend.yml

@@ -5,32 +5,19 @@ on:
     branches:
       - master
       - develop
-    paths:
-      - packages/backend/**
-      # for permissions
-      - packages/misskey-js/**
-      - .github/workflows/test-backend.yml
-      - .github/misskey/test.yml
   pull_request:
-    paths:
+
-      - packages/backend/**
-      # for permissions
-      - packages/misskey-js/**
-      - .github/workflows/test-backend.yml
-      - .github/misskey/test.yml
 jobs:
-  unit:
+  jest:
-    name: Unit tests (backend)
     runs-on: ubuntu-latest
+
     strategy:
       matrix:
-        node-version-file:
+        node-version: [18.x]
-          - .node-version
-          - .github/min.node-version
 
     services:
       postgres:
-        image: postgres:15
+        image: postgres:13
         ports:
           - 54312:5432
         env:
@@ -42,31 +29,20 @@ jobs:
           - 56312:6379
 
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         submodules: true
-    - name: Setup pnpm
+    - name: Install pnpm
-      uses: pnpm/action-setup@v4.1.0
+      uses: pnpm/action-setup@v2
-    - name: Install FFmpeg
-      run: |
-        for i in {1..3}; do
-          echo "Attempt $i: Installing FFmpeg..."
-          curl -s -L https://johnvansickle.com/ffmpeg/releases/ffmpeg-release-amd64-static.tar.xz -o ffmpeg.tar.xz && \
-          tar -xf ffmpeg.tar.xz && \
-          mv ffmpeg-*-static/ffmpeg /usr/local/bin/ && \
-          mv ffmpeg-*-static/ffprobe /usr/local/bin/ && \
-          rm -rf ffmpeg.tar.xz ffmpeg-*-static/ && \
-          break || sleep 10
-          if [ $i -eq 3 ]; then
-            echo "Failed to install FFmpeg after 3 attempts"
-            exit 1
-          fi
-        done
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
       with:
-        node-version-file: ${{ matrix.node-version-file }}
+        version: 8
+        run_install: false
+    - name: Use Node.js ${{ matrix.node-version }}
+      uses: actions/setup-node@v3.6.0
+      with:
+        node-version: ${{ matrix.node-version }}
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
     - name: Check pnpm-lock.yaml
       run: git diff --exit-code pnpm-lock.yaml
@@ -75,57 +51,9 @@ jobs:
     - name: Build
       run: pnpm build
     - name: Test
-      run: pnpm --filter backend test-and-coverage
+      run: pnpm jest-and-coverage
-    - name: Upload to Codecov
+    - name: Upload Coverage
-      uses: codecov/codecov-action@v5
+      uses: codecov/codecov-action@v3
       with:
         token: ${{ secrets.CODECOV_TOKEN }}
         files: ./packages/backend/coverage/coverage-final.json
-
-  e2e:
-    name: E2E tests (backend)
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        node-version-file:
-          - .node-version
-          - .github/min.node-version
-
-    services:
-      postgres:
-        image: postgres:15
-        ports:
-          - 54312:5432
-        env:
-          POSTGRES_DB: test-misskey
-          POSTGRES_HOST_AUTH_METHOD: trust
-      redis:
-        image: redis:7
-        ports:
-          - 56312:6379
-
-    steps:
-      - uses: actions/checkout@v4.2.2
-        with:
-          submodules: true
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4.1.0
-      - name: Use Node.js
-        uses: actions/setup-node@v4.4.0
-        with:
-          node-version-file: ${{ matrix.node-version-file }}
-          cache: 'pnpm'
-      - run: pnpm i --frozen-lockfile
-      - name: Check pnpm-lock.yaml
-        run: git diff --exit-code pnpm-lock.yaml
-      - name: Copy Configure
-        run: cp .github/misskey/test.yml .config
-      - name: Build
-        run: pnpm build
-      - name: Test
-        run: pnpm --filter backend test-and-coverage:e2e
-      - name: Upload to Codecov
-        uses: codecov/codecov-action@v5
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          files: ./packages/backend/coverage/coverage-final.json

.github/workflows/test-federation.yml

@@ -1,89 +0,0 @@
-name: Test (federation)
-
-on:
-  push:
-    branches:
-      - master
-      - develop
-    paths:
-      - packages/backend/**
-      - packages/misskey-js/**
-      - .github/workflows/test-federation.yml
-  pull_request:
-    paths:
-      - packages/backend/**
-      - packages/misskey-js/**
-      - .github/workflows/test-federation.yml
-
-jobs:
-  test:
-    name: Federation test
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        node-version-file:
-          - .node-version
-          - .github/min.node-version
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4.1.0
-      - name: Install FFmpeg
-        run: |
-          for i in {1..3}; do
-            echo "Attempt $i: Installing FFmpeg..."
-            curl -s -L https://johnvansickle.com/ffmpeg/releases/ffmpeg-release-amd64-static.tar.xz -o ffmpeg.tar.xz && \
-            tar -xf ffmpeg.tar.xz && \
-            mv ffmpeg-*-static/ffmpeg /usr/local/bin/ && \
-            mv ffmpeg-*-static/ffprobe /usr/local/bin/ && \
-            rm -rf ffmpeg.tar.xz ffmpeg-*-static/ && \
-            break || sleep 10
-            if [ $i -eq 3 ]; then
-              echo "Failed to install FFmpeg after 3 attempts"
-              exit 1
-            fi
-          done
-      - name: Use Node.js
-        uses: actions/setup-node@v4.4.0
-        with:
-          node-version-file: ${{ matrix.node-version-file }}
-          cache: 'pnpm'
-      - name: Build Misskey
-        run: |
-          pnpm i --frozen-lockfile
-          pnpm build
-      - name: Setup
-        run: |
-          echo "NODE_VERSION=$(cat ${{ matrix.node-version-file }})" >> $GITHUB_ENV
-          cd packages/backend/test-federation
-          bash ./setup.sh
-          sudo chmod 644 ./certificates/*.test.key
-      - name: Start servers
-        id: start_servers
-        continue-on-error: true
-        # https://github.com/docker/compose/issues/1294#issuecomment-374847206
-        run: |
-          cd packages/backend/test-federation
-          docker compose up -d --scale tester=0
-      - name: Print start_servers error
-        if: ${{ steps.start_servers.outcome == 'failure' }}
-        run: |
-          cd packages/backend/test-federation
-          docker compose logs | tail -n 300
-          exit 1
-      - name: Test
-        run: |
-          cd packages/backend/test-federation
-          docker compose run --no-deps tester
-      - name: Log
-        if: always()
-        run: |
-          cd packages/backend/test-federation
-          docker compose logs
-      - name: Stop servers
-        if: always()
-        run: |
-          cd packages/backend/test-federation
-          docker compose down

.github/workflows/test-frontend.yml

@@ -5,39 +5,31 @@ on:
     branches:
       - master
       - develop
-    paths:
-      - packages/frontend/**
-      # for permissions
-      - packages/misskey-js/**
-      # for e2e
-      - packages/backend/**
-      - .github/workflows/test-frontend.yml
-      - .github/misskey/test.yml
   pull_request:
-    paths:
+
-      - packages/frontend/**
-      # for permissions
-      - packages/misskey-js/**
-      # for e2e
-      - packages/backend/**
-      - .github/workflows/test-frontend.yml
-      - .github/misskey/test.yml
 jobs:
   vitest:
-    name: Unit tests (frontend)
     runs-on: ubuntu-latest
 
+    strategy:
+      matrix:
+        node-version: [18.x]
+
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         submodules: true
-    - name: Setup pnpm
+    - name: Install pnpm
-      uses: pnpm/action-setup@v4.1.0
+      uses: pnpm/action-setup@v2
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
       with:
-        node-version-file: '.node-version'
+        version: 8
+        run_install: false
+    - name: Use Node.js ${{ matrix.node-version }}
+      uses: actions/setup-node@v3.6.0
+      with:
+        node-version: ${{ matrix.node-version }}
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
     - name: Check pnpm-lock.yaml
       run: git diff --exit-code pnpm-lock.yaml
@@ -48,23 +40,23 @@ jobs:
     - name: Test
       run: pnpm --filter frontend test-and-coverage
     - name: Upload Coverage
-      uses: codecov/codecov-action@v5
+      uses: codecov/codecov-action@v3
       with:
         token: ${{ secrets.CODECOV_TOKEN }}
         files: ./packages/frontend/coverage/coverage-final.json
 
   e2e:
-    name: E2E tests (frontend)
     runs-on: ubuntu-latest
 
     strategy:
       fail-fast: false
       matrix:
+        node-version: [18.x]
         browser: [chrome]
 
     services:
       postgres:
-        image: postgres:15
+        image: postgres:13
         ports:
           - 54312:5432
         env:
@@ -76,7 +68,7 @@ jobs:
           - 56312:6379
 
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         submodules: true
     # https://github.com/cypress-io/cypress-docker-images/issues/150
@@ -85,13 +77,17 @@ jobs:
     #  if: ${{ matrix.browser == 'firefox' }}
     #- uses: browser-actions/setup-firefox@latest
     #  if: ${{ matrix.browser == 'firefox' }}
-    - name: Setup pnpm
+    - name: Install pnpm
-      uses: pnpm/action-setup@v4.1.0
+      uses: pnpm/action-setup@v2
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
       with:
-        node-version-file: '.node-version'
+        version: 7
+        run_install: false
+    - name: Use Node.js ${{ matrix.node-version }}
+      uses: actions/setup-node@v3.6.0
+      with:
+        node-version: ${{ matrix.node-version }}
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
     - name: Copy Configure
       run: cp .github/misskey/test.yml .config
@@ -105,20 +101,19 @@ jobs:
     - name: Cypress install
       run: pnpm exec cypress install
     - name: Cypress run
-      uses: cypress-io/github-action@v6
+      uses: cypress-io/github-action@v5
-      timeout-minutes: 15
       with:
         install: false
         start: pnpm start:test
         wait-on: 'http://localhost:61812'
         headed: true
         browser: ${{ matrix.browser }}
-    - uses: actions/upload-artifact@v4
+    - uses: actions/upload-artifact@v2
       if: failure()
       with:
         name: ${{ matrix.browser }}-cypress-screenshots
         path: cypress/screenshots
-    - uses: actions/upload-artifact@v4
+    - uses: actions/upload-artifact@v2
       if: always()
       with:
         name: ${{ matrix.browser }}-cypress-videos

.github/workflows/test-misskey-js.yml

@@ -6,31 +6,29 @@ name: Test (misskey.js)
 on:
   push:
     branches: [ develop ]
-    paths:
-      - packages/misskey-js/**
-      - .github/workflows/test-misskey-js.yml
   pull_request:
     branches: [ develop ]
-    paths:
+
-      - packages/misskey-js/**
-      - .github/workflows/test-misskey-js.yml
 jobs:
   test:
-    name: Unit tests (misskey.js)
 
     runs-on: ubuntu-latest
 
+    strategy:
+      matrix:
+        node-version: [18.x]
+        # See supported Node.js release schedule at https://nodejs.org/en/about/releases/
+
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v3.3.0
 
-      - name: Setup pnpm
+      - run: corepack enable
-        uses: pnpm/action-setup@v4.1.0
 
-      - name: Setup Node.js
+      - name: Setup Node.js ${{ matrix.node-version }}
-        uses: actions/setup-node@v4.4.0
+        uses: actions/setup-node@v3.6.0
         with:
-          node-version-file: '.node-version'
+          node-version: ${{ matrix.node-version }}
           cache: 'pnpm'
 
       - name: Install dependencies
@@ -48,7 +46,7 @@ jobs:
           CI: true
 
       - name: Upload Coverage
-        uses: codecov/codecov-action@v5
+        uses: codecov/codecov-action@v3
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
           files: ./packages/misskey-js/coverage/coverage-final.json

.github/workflows/test-production.yml

@@ -12,20 +12,27 @@ env:
 
 jobs:
   production:
-    name: Production build
     runs-on: ubuntu-latest
 
+    strategy:
+      matrix:
+        node-version: [18.x]
+
     steps:
-    - uses: actions/checkout@v4.2.2
+    - uses: actions/checkout@v3.3.0
       with:
         submodules: true
-    - name: Setup pnpm
+    - name: Install pnpm
-      uses: pnpm/action-setup@v4.1.0
+      uses: pnpm/action-setup@v2
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
       with:
-        node-version-file: '.node-version'
+        version: 8
+        run_install: false
+    - name: Use Node.js ${{ matrix.node-version }}
+      uses: actions/setup-node@v3.6.0
+      with:
+        node-version: ${{ matrix.node-version }}
         cache: 'pnpm'
+    - run: corepack enable
     - run: pnpm i --frozen-lockfile
     - name: Check pnpm-lock.yaml
       run: git diff --exit-code pnpm-lock.yaml

.github/workflows/validate-api-json.yml

@@ -1,40 +0,0 @@
-name: api.json validation
-
-on:
-  push:
-    branches:
-      - master
-      - develop
-    paths:
-      - packages/backend/**
-      - .github/workflows/validate-api-json.yml
-  pull_request:
-    paths:
-      - packages/backend/**
-      - .github/workflows/validate-api-json.yml
-jobs:
-  validate-api-json:
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/checkout@v4.2.2
-      with:
-        submodules: true
-    - name: Setup pnpm
-      uses: pnpm/action-setup@v4.1.0
-    - name: Use Node.js
-      uses: actions/setup-node@v4.4.0
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - name: Install Redocly CLI
-      run: npm i -g @redocly/cli
-    - run: pnpm i --frozen-lockfile
-    - name: Check pnpm-lock.yaml
-      run: git diff --exit-code pnpm-lock.yaml
-    - name: Copy Configure
-      run: cp .config/example.yml .config/default.yml
-    - name: Build and generate
-      run: pnpm build && pnpm --filter backend generate-api-json
-    - name: Validation
-      run: npx @redocly/cli lint --extends=minimal ./packages/backend/built/api.json

.gitignore

@@ -35,17 +35,12 @@ coverage
 !/.config/example.yml
 !/.config/docker_example.yml
 !/.config/docker_example.env
-!/.config/cypress-devcontainer.yml
 docker-compose.yml
-./compose.yml
+!/.devcontainer/docker-compose.yml
-.devcontainer/compose.yml
-!/.devcontainer/compose.yml
 
 # misskey
 /build
 built
-built-test
-js-built
 /data
 /.cache-loader
 /db
@@ -62,14 +57,6 @@ api-docs.json
 ormconfig.json
 temp
 /packages/frontend/src/**/*.stories.ts
-tsdoc-metadata.json
-misskey-assets
-
-# Vite temporary files
-vite.config.js.timestamp-*
-vite.config.ts.timestamp-*
-vite.config.local-dev.js.timestamp-*
-vite.config.local-dev.ts.timestamp-*
 
 # blender backups
 *.blend1
@@ -77,6 +64,3 @@ vite.config.local-dev.ts.timestamp-*
 *.blend3
 *.blend4
 *.blend5
-
-# VSCode addon
-.favorites.json

.gitmodules

@@ -1,3 +1,6 @@
+[submodule "misskey-assets"]
+	path = misskey-assets
+	url = https://github.com/misskey-dev/assets.git
 [submodule "fluent-emojis"]
 	path = fluent-emojis
 	url = https://github.com/misskey-dev/emojis.git

.node-version

@@ -1 +1 @@
-22.15.0
+18.16.0

.npmrc

@@ -1,3 +0,0 @@
-engine-strict = true
-save-exact = true
-shell-emulator = true

.vscode/extensions.json

@@ -3,7 +3,9 @@
 		"editorconfig.editorconfig",
 		"dbaeumer.vscode-eslint",
 		"Vue.volar",
+		"Vue.vscode-typescript-vue-plugin",
 		"Orta.vscode-jest",
+		"dbaeumer.vscode-eslint",
 		"mrmlnc.vscode-json5"
 	]
 }

.vscode/settings.json

@@ -1,15 +1,11 @@
 {
-	"search.exclude": {
+    "search.exclude": {
-		"**/node_modules": true
+        "**/node_modules": true
-	},
+    },
-	"typescript.tsdk": "node_modules/typescript/lib",
+    "typescript.tsdk": "node_modules/typescript/lib",
-	"files.associations": {
+    "files.associations": {
-		"*.test.ts": "typescript"
+        "*.test.ts": "typescript"
-	},
+    },
-	"jest.jestCommandLine": "pnpm run jest",
+    "jest.jestCommandLine": "pnpm run jest",
-	"jest.runMode": "on-demand",
+    "jest.autoRun": "off"
-	"editor.codeActionsOnSave": {
+}
-		"source.fixAll": "explicit"
-	},
-	"editor.formatOnSave": false
-}

CODE_OF_CONDUCT.md

@@ -2,131 +2,45 @@
 
 ## Our Pledge
 
-We as members, contributors, and leaders pledge to make participation in our
+In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
-community a harassment-free experience for everyone, regardless of age, body
-size, visible or invisible disability, ethnicity, sex characteristics, gender
-identity and expression, level of experience, education, socio-economic status,
-nationality, personal appearance, race, caste, color, religion, or sexual
-identity and orientation.
-
-We pledge to act and interact in ways that contribute to an open, welcoming,
-diverse, inclusive, and healthy community.
 
 ## Our Standards
 
-Examples of behavior that contributes to a positive environment for our
+Examples of behavior that contributes to creating a positive environment include:
-community include:
 
-* Demonstrating empathy and kindness toward other people
+* Using welcoming and inclusive language
-* Being respectful of differing opinions, viewpoints, and experiences
+* Being respectful of differing viewpoints and experiences
-* Giving and gracefully accepting constructive feedback
+* Gracefully accepting constructive criticism
-* Accepting responsibility and apologizing to those affected by our mistakes,
+* Focusing on what is best for the community
-  and learning from the experience
+* Showing empathy towards other community members
-* Focusing on what is best not just for us as individuals, but for the overall
-  community
 
-Examples of unacceptable behavior include:
+Examples of unacceptable behavior by participants include:
 
-* The use of sexualized language or imagery, and sexual attention or advances of
+* The use of sexualized language or imagery and unwelcome sexual attention or advances
-  any kind
+* Trolling, insulting/derogatory comments, and personal or political attacks
-* Trolling, insulting or derogatory comments, and personal or political attacks
 * Public or private harassment
-* Publishing others' private information, such as a physical or email address,
+* Publishing others' private information, such as a physical or electronic address, without explicit permission
-  without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
-* Other conduct which could reasonably be considered inappropriate in a
-  professional setting
 
-## Enforcement Responsibilities
+## Our Responsibilities
 
-Community leaders are responsible for clarifying and enforcing our standards of
+Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
-acceptable behavior and will take appropriate and fair corrective action in
-response to any behavior that they deem inappropriate, threatening, offensive,
-or harmful.
 
-Community leaders have the right and responsibility to remove, edit, or reject
+Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
-comments, commits, code, wiki edits, issues, and other contributions that are
-not aligned to this Code of Conduct, and will communicate reasons for moderation
-decisions when appropriate.
 
 ## Scope
 
-This Code of Conduct applies within all community spaces, and also applies when
+This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
-an individual is officially representing the community in public spaces.
-Examples of representing our community include using an official e-mail address,
-posting via an official social media account, or acting as an appointed
-representative at an online or offline event.
 
 ## Enforcement
 
-Instances of abusive, harassing, or otherwise unacceptable behavior may be
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at syuilotan@yahoo.co.jp. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
-reported to the community leaders responsible for enforcement at
-<syuilotan@yahoo.co.jp>.
-All complaints will be reviewed and investigated promptly and fairly.
 
-All community leaders are obligated to respect the privacy and security of the
+Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
-reporter of any incident.
-
-## Enforcement Guidelines
-
-Community leaders will follow these Community Impact Guidelines in determining
-the consequences for any action they deem in violation of this Code of Conduct:
-
-### 1. Correction
-
-**Community Impact**: Use of inappropriate language or other behavior deemed
-unprofessional or unwelcome in the community.
-
-**Consequence**: A private, written warning from community leaders, providing
-clarity around the nature of the violation and an explanation of why the
-behavior was inappropriate. A public apology may be requested.
-
-### 2. Warning
-
-**Community Impact**: A violation through a single incident or series of
-actions.
-
-**Consequence**: A warning with consequences for continued behavior. No
-interaction with the people involved, including unsolicited interaction with
-those enforcing the Code of Conduct, for a specified period of time. This
-includes avoiding interactions in community spaces as well as external channels
-like social media. Violating these terms may lead to a temporary or permanent
-ban.
-
-### 3. Temporary Ban
-
-**Community Impact**: A serious violation of community standards, including
-sustained inappropriate behavior.
-
-**Consequence**: A temporary ban from any sort of interaction or public
-communication with the community for a specified period of time. No public or
-private interaction with the people involved, including unsolicited interaction
-with those enforcing the Code of Conduct, is allowed during this period.
-Violating these terms may lead to a permanent ban.
-
-### 4. Permanent Ban
-
-**Community Impact**: Demonstrating a pattern of violation of community
-standards, including sustained inappropriate behavior, harassment of an
-individual, or aggression toward or disparagement of classes of individuals.
-
-**Consequence**: A permanent ban from any sort of public interaction within the
-community.
 
 ## Attribution
 
-This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [http://contributor-covenant.org/version/1/4][version]
-version 2.1, available at
-[https://www.contributor-covenant.org/version/2/1/code_of_conduct.html][v2.1].
 
-Community Impact Guidelines were inspired by
+[homepage]: http://contributor-covenant.org
-[Mozilla's code of conduct enforcement ladder][Mozilla CoC].
+[version]: http://contributor-covenant.org/version/1/4/
-
-For answers to common questions about this code of conduct, see the FAQ at
-[https://www.contributor-covenant.org/faq][FAQ]. Translations are available at
-[https://www.contributor-covenant.org/translations][translations].
-
-[homepage]: https://www.contributor-covenant.org
-[v2.1]: https://www.contributor-covenant.org/version/2/1/code_of_conduct.html
-[Mozilla CoC]: https://github.com/mozilla/diversity
-[FAQ]: https://www.contributor-covenant.org/faq
-[translations]: https://www.contributor-covenant.org/translations

CONTRIBUTING.md

@@ -1,7 +1,7 @@
 # Contribution guide
 We're glad you're interested in contributing Misskey! In this document you will find the information you need to contribute to the project.
 
-> [!NOTE]
+> **Note**
 > This project uses Japanese as its major language, **but you do not need to translate and write the Issues/PRs in Japanese.**
 > Also, you might receive comments on your Issue/PR in Japanese, but you do not need to reply to them in Japanese as well.\
 > The accuracy of machine translation into Japanese is not high, so it will be easier for us to understand if you write it in the original language.
@@ -15,33 +15,18 @@ Before creating an issue, please check the following:
 - To avoid duplication, please search for similar issues before creating a new issue.
 - Do not use Issues to ask questions or troubleshooting.
 	- Issues should only be used to feature requests, suggestions, and bug tracking.
-	- Please ask questions or troubleshooting in [GitHub Discussions](https://github.com/misskey-dev/misskey/discussions) or [Discord](https://discord.gg/Wp8gVStHW3).
+	- Please ask questions or troubleshooting in ~~the [Misskey Forum](https://forum.misskey.io/)~~ [GitHub Discussions](https://github.com/misskey-dev/misskey/discussions) or [Discord](https://discord.gg/Wp8gVStHW3).
 
-> [!WARNING]
+> **Warning**
 > Do not close issues that are about to be resolved. It should remain open until a commit that actually resolves it is merged.
 
-### Recommended discussing before implementation
+## Before implementation
-We welcome your proposal.
-
 When you want to add a feature or fix a bug, **first have the design and policy reviewed in an Issue** (if it is not there, please make one). Without this step, there is a high possibility that the PR will not be merged even if it is implemented.
 
 At this point, you also need to clarify the goals of the PR you will create, and make sure that the other members of the team are aware of them.
 PRs that do not have a clear set of do's and don'ts tend to be bloated and difficult to review.
 
-Also, when you start implementation, assign yourself to the Issue (if you cannot do it yourself, ask Committer to assign you).
+Also, when you start implementation, assign yourself to the Issue (if you cannot do it yourself, ask another member to assign you). By expressing your intention to work the Issue, you can prevent conflicts in the work.
-By expressing your intention to work on the Issue, you can prevent conflicts in the work.
-
-To the Committers: you should not assign someone on it before the Final Decision.
-
-### How issues are triaged
-
-The Committers may:
-* close an issue that is not reproducible on latest stable release,
-* merge an issue into another issue,
-* split an issue into multiple issues,
-* or re-open that has been closed for some reason which is not applicable anymore.
-
-@syuilo reserves the Final Decision rights including whether the project will implement feature and how to implement, these rights are not always exercised.
 
 ## Well-known branches
 - **`master`** branch is tracking the latest release and used for production purposes.
@@ -52,45 +37,25 @@ The Committers may:
 ## Creating a PR
 Thank you for your PR! Before creating a PR, please check the following:
 - If possible, prefix the title with a keyword that identifies the type of this PR, as shown below.
-	- `fix` / `refactor` / `feat` / `enhance` / `perf` / `chore` etc
+  - `fix` / `refactor` / `feat` / `enhance` / `perf` / `chore` etc
-	- Also, make sure that the granularity of this PR is appropriate. Please do not include more than one type of change or interest in a single PR.
+  - Also, make sure that the granularity of this PR is appropriate. Please do not include more than one type of change or interest in a single PR.
 - If there is an Issue which will be resolved by this PR, please include a reference to the Issue in the text.
 - Please add the summary of the changes to [`CHANGELOG.md`](/CHANGELOG.md). However, this is not necessary for changes that do not affect the users, such as refactoring.
 - Check if there are any documents that need to be created or updated due to this change.
 - If you have added a feature or fixed a bug, please add a test case if possible.
 - Please make sure that tests and Lint are passed in advance.
-	- You can run it with `pnpm test` and `pnpm lint`. [See more info](#testing)
+  - You can run it with `pnpm test` and `pnpm lint`. [See more info](#testing)
 - If this PR includes UI changes, please attach a screenshot in the text.
 
 Thanks for your cooperation 🤗
 
-### Additional things for ActivityPub payload changes
-*This section is specific to misskey-dev implementation. Other fork or implementation may take different way. A significant difference is that non-"misskey-dev" extension is not described in the misskey-hub's document.*
-
-If PR includes changes to ActivityPub payload, please reflect it in [misskey-hub's document](https://github.com/misskey-dev/misskey-hub-next/blob/master/content/ns.md) by sending PR.
-
-The name of purporsed extension property (referred as "extended property" in later) to ActivityPub shall be prefixed by `_misskey_`. (i.e. `_misskey_quote`)
-
-The extended property in `packages/backend/src/core/activitypub/type.ts` **must** be declared as optional because ActivityPub payloads that comes from older Misskey or other implementation may not contain it.
-
-The extended property must be included in the context definition. Context is defined in `packages/backend/src/core/activitypub/misc/contexts.ts`.
-The key shall be same as the name of extended property, and the value shall be same as "short IRI".
-
-"Short IRI" is defined in misskey-hub's document, but usually takes form of `misskey:<name of extended property>`. (i.e. `misskey:_misskey_quote`)
-
-One should not add property that has defined before by other implementation, or add custom variant value to "well-known" property.
-
 ## Reviewers guide
 Be willing to comment on the good points and not just the things you want fixed 💯
 
-読んでおくといいやつ
-- https://blog.lacolaco.net/posts/1e2cf439b3c2/
-- https://konifar-zatsu.hatenadiary.jp/entry/2024/11/05/192421
-
 ### Review perspective
 - Scope
-	- Are the goals of the PR clear?
+  - Are the goals of the PR clear?
-	- Is the granularity of the PR appropriate?
+  - Is the granularity of the PR appropriate?
 - Security
 	- Does merging this PR create a vulnerability?
 - Performance
@@ -101,22 +66,6 @@ Be willing to comment on the good points and not just the things you want fixed
 	- Are there any omissions or gaps?
 	- Does it check for anomalies?
 
-## Security Advisory
-### For reporter
-Thank you for your reporting!
-
-If you can also create a patch to fix the vulnerability, please create a PR on the private fork.
-
-> [!note]
-> There is a GitHub bug that prevents merging if a PR not following the develop branch of upstream, so please keep follow the develop branch.
-
-### For misskey-dev member
-修正PRがdevelopに追従されていないとマージできないので、マージできなかったら
-
-> Could you merge or rebase onto upstream develop branch?
-
-などと伝える。
-
 ## Deploy
 The `/deploy` command by issue comment can be used to deploy the contents of a PR to the preview environment.
 ```
@@ -128,7 +77,7 @@ An actual domain will be assigned so you can test the federation.
 
 ## Release
 ### Release Instructions
-1. Commit version changes in the `develop` branch ([package.json](package.json))
+1. Commit version changes in the `develop` branch ([package.json](https://github.com/misskey-dev/misskey/blob/develop/package.json))
 2. Create a release PR.
 	- Into `master` from `develop` branch.
 	- The title must be in the format `Release: x.y.z`.
@@ -139,7 +88,7 @@ An actual domain will be assigned so you can test the federation.
 	- The target branch must be `master`
 	- The tag name must be the version
 
-> [!NOTE]
+> **Note**
 > Why this instruction is necessary:
 > - To perform final QA checks
 > - To distribute responsibility
@@ -152,30 +101,26 @@ You can improve our translations with your Crowdin account.
 Your changes in Crowdin are automatically submitted as a PR (with the title "New Crowdin translations") to the repository.
 The owner [@syuilo](https://github.com/syuilo) merges the PR into the develop branch before the next release.
 
-If your language is not listed in Crowdin, please open an issue. We will add it to Crowdin.
+If your language is not listed in Crowdin, please open an issue.
-For newly added languages, once the translation progress per language exceeds 70%, it will be officially introduced into Misskey and made available to users.
 
 ![Crowdin](https://d322cqt584bo4o.cloudfront.net/misskey/localized.svg)
 
 ## Development
-### Setup
+During development, it is useful to use the 
-Before developing, you have to set up environment. Misskey requires Redis, PostgreSQL, and FFmpeg.
 
-You would want to install Meilisearch to experiment related features. Technically, meilisearch is not strict requirement, but some features and tests require it.
+```
+pnpm dev
+```
 
-There are a few ways to proceed.
+command.
 
-#### Use system-wide software
+- Server-side source files and automatically builds them if they are modified. Automatically start the server process(es).
-You could install them in system-wide (such as from package manager).
+- Vite HMR (just the `vite` command) is available. The behavior may be different from production.
-
+- Service Worker is watched by esbuild.
-#### Use `docker compose`
-You could obtain middleware container by typing `docker compose -f $PROJECT_ROOT/compose.local-db.yml up -d`.
-
-#### Use Devcontainer
-Devcontainer also has necessary setting. This method can be done by connecting from VSCode.
 
+### Dev Container
 Instead of running `pnpm` locally, you can use Dev Container to set up your development environment.
-To use Dev Container, open the project directory on VSCode with Dev Containers installed.
+To use Dev Container, open the project directory on VSCode with Dev Containers installed.  
 **Note:** If you are using Windows, please clone the repository with WSL. Using Git for Windows will result in broken files due to the difference in how newlines are handled.
 
 It will run the following command automatically inside the container.
@@ -187,61 +132,38 @@ pnpm build
 pnpm migrate
 ```
 
-After finishing the migration, you can proceed.
+After finishing the migration, run the `pnpm dev` command to start the development server.
 
-### Start developing
+``` bash
-During development, it is useful to use the
-```
 pnpm dev
 ```
-command.
-
-- Server-side source files and automatically builds them if they are modified. Automatically start the server process(es).
-- Service Worker is watched by esbuild.
-- Vite HMR (just the `vite` command) is available. The behavior may be different from production.
-- Vite runs behind the backend (the backend will proxy Vite at /vite and /embed_vite except for websocket used for HMR).
-- You can see Misskey by accessing `http://localhost:3000` (Replace `3000` with the port configured with `port` in .config/default.yml).
 
 ## Testing
-You can run non-backend tests by executing following commands:
+- Test codes are located in [`/packages/backend/test`](/packages/backend/test).
-```sh
+
-pnpm --filter frontend test
+### Run test
-pnpm --filter misskey-js test
+Create a config file.
 ```
-
-Backend tests require manual preparation of servers. See the next section for more on this.
-
-### Backend
-There are three types of test codes for the backend:
-- Unit tests: [`/packages/backend/test/unit`](/packages/backend/test/unit)
-- Single-server E2E tests: [`/packages/backend/test/e2e`](/packages/backend/test/e2e)
-- Multiple-server E2E tests: [`/packages/backend/test-federation`](/packages/backend/test-federation)
-
-#### Running Unit Tests or Single-server E2E Tests
-1. Create a config file:
-```sh
 cp .github/misskey/test.yml .config/
 ```
-
+Prepare DB/Redis for testing.
-2. Start DB and Redis servers for testing:
-```sh
-docker compose -f packages/backend/test/compose.yml up
 ```
-Instead, you can prepare an empty (data can be erased) DB and edit `.config/test.yml` appropriately.
+docker compose -f packages/backend/test/docker-compose.yml up
-
-3. Run all tests:
-```sh
-pnpm --filter backend test     # unit tests
-pnpm --filter backend test:e2e # single-server E2E tests
 ```
-If you want to run a specific test, run as a following command:
+Alternatively, prepare an empty (data can be erased) DB and edit `.config/test.yml`. 
-```sh
+
-pnpm --filter backend test -- packages/backend/test/unit/activitypub.ts
+Run all test.
-pnpm --filter backend test:e2e -- packages/backend/test/e2e/nodeinfo.ts
+```
+pnpm test
 ```
 
-#### Running Multiple-server E2E Tests
+#### Run specify test
-See [`/packages/backend/test-federation/README.md`](/packages/backend/test-federation/README.md).
+```
+pnpm jest -- foo.ts
+```
+
+### e2e tests
+TODO
 
 ## Environment Variable
 
@@ -258,12 +180,6 @@ Misskey uses Vue(v3) as its front-end framework.
 - **When creating a new component, please use the Composition API (with [setup sugar](https://v3.vuejs.org/api/sfc-script-setup.html) and [ref sugar](https://github.com/vuejs/rfcs/discussions/369)) instead of the Options API.**
 	- Some of the existing components are implemented in the Options API, but it is an old implementation. Refactors that migrate those components to the Composition API are also welcome.
 
-## Tabler Icons
-アイコンは、Production Build時に使用されていないものが削除されるようになっています。
-
-**アイコンを動的に設定する際には、 `ti-${someVal}` のような、アイコン名のみを動的に変化させる実装を行わないでください。**
-必ず `ti-xxx` のような完全なクラス名を含めるようにしてください。
-
 ## nirax
 niraxは、Misskeyで使用しているオリジナルのフロントエンドルーティングシステムです。
 **vue-routerから影響を多大に受けているので、まずはvue-routerについて学ぶことをお勧めします。**
@@ -271,7 +187,7 @@ niraxは、Misskeyで使用しているオリジナルのフロントエンド
 ### ルート定義
 ルート定義は、以下の形式のオブジェクトの配列です。
 
-```ts
+``` ts
 {
 	name?: string;
 	path: string;
@@ -279,11 +195,12 @@ niraxは、Misskeyで使用しているオリジナルのフロントエンド
 	query?: Record<string, string>;
 	loginRequired?: boolean;
 	hash?: string;
+	globalCacheKey?: string;
 	children?: RouteDef[];
 }
 ```
 
-> [!WARNING]
+> **Warning**
 > 現状、ルートは定義された順に評価されます。
 > たとえば、`/foo/:id`ルート定義の次に`/foo/bar`ルート定義がされていた場合、後者がマッチすることはありません。
 
@@ -297,13 +214,30 @@ Misskey uses [Storybook](https://storybook.js.org/) for UI development.
 
 ### Setup & Run
 
-#### Setup
+#### Universal
+
+##### Setup
+
+```bash
+pnpm --filter misskey-js build
+pnpm --filter frontend tsc -p .storybook && (node packages/frontend/.storybook/preload-locale.js & node packages/frontend/.storybook/preload-theme.js)
+```
+
+##### Run
+
+```bash
+node packages/frontend/.storybook/generate.js && pnpm --filter frontend storybook dev
+```
+
+#### macOS & Linux
+
+##### Setup
 
 ```bash
 pnpm --filter misskey-js build
 ```
 
-#### Run
+##### Run
 
 ```bash
 pnpm --filter frontend storybook-dev
@@ -345,7 +279,7 @@ export const Default = {
 	parameters: {
 		layout: 'centered',
 	},
-} satisfies StoryObj<typeof MyComponent>;
+} satisfies StoryObj<typeof MkAvatar>;
 ```
 
 If you want to opt-out from the automatic generation, create a `MyComponent.stories.impl.ts` file and add the following line to the file.
@@ -365,127 +299,25 @@ export const argTypes = {
 			min: 1,
 			max: 4,
 		},
-	},
 };
 ```
 
 Also, you can use msw to mock API requests in the storybook. Creating a `MyComponent.stories.msw.ts` file to define the mock handlers.
 
 ```ts
-import { HttpResponse, http } from 'msw';
+import { rest } from 'msw';
 export const handlers = [
-	http.post('/api/notes/timeline', ({ request }) => {
+	rest.post('/api/notes/timeline', (req, res, ctx) => {
-		return HttpResponse.json([]);
+		return res(
+			ctx.json([]),
+		);
 	}),
 ];
 ```
 
 Don't forget to re-run the `.storybook/generate.js` script after adding, editing, or removing the above files.
 
-## Nest
-
-### Nest Service Circular dependency / Nestでサービスの循環参照でエラーが起きた場合
-
-#### forwardRef
-まずは簡単に`forwardRef`を試してみる
-
-```typescript
-export class FooService {
-	constructor(
-		@Inject(forwardRef(() => BarService))
-		private barService: BarService
-	) {
-	}
-}
-```
-
-#### OnModuleInit
-できなければ`OnModuleInit`を使う
-
-```typescript
-import { Injectable, OnModuleInit } from '@nestjs/common';
-import { ModuleRef } from '@nestjs/core';
-import { BarService } from '@/core/BarService';
-
-@Injectable()
-export class FooService implements OnModuleInit {
-	private barService: BarService // constructorから移動してくる
-
-	constructor(
-		private moduleRef: ModuleRef,
-	) {
-	}
-
-	async onModuleInit() {
-		this.barService = this.moduleRef.get(BarService.name);
-	}
-
-	public async niceMethod() {
-		return await this.barService.incredibleMethod({ hoge: 'fuga' });
-	}
-}
-```
-
-##### Service Unit Test
-テストで`onModuleInit`を呼び出す必要がある
-
-```typescript
-// import ...
-
-describe('test', () => {
-	let app: TestingModule;
-	let fooService: FooService; // for test case
-	let barService: BarService; // for test case
-
-	beforeEach(async () => {
-		app = await Test.createTestingModule({
-			imports: ...,
-			providers: [
-				FooService,
-				{ // mockする (mockは必須ではないかもしれない)
-					provide: BarService,
-					useFactory: () => ({
-						incredibleMethod: jest.fn(),
-					}),
-				},
-				{ // Provideにする
-					provide: BarService.name,
-					useExisting: BarService,
-				},
-			],
-		})
-			.useMocker(...
-			.compile();
-
-		fooService = app.get<FooService>(FooService);
-		barService = app.get<BarService>(BarService) as jest.Mocked<BarService>;
-
-		// onModuleInitを実行する
-		await fooService.onModuleInit();
-	});
-
-	test('nice', () => {
-		await fooService.niceMethod();
-
-		expect(barService.incredibleMethod).toHaveBeenCalled();
-		expect(barService.incredibleMethod.mock.lastCall![0])
-			.toEqual({ hoge: 'fuga' });
-	});
-})
-```
-
 ## Notes
-
-### Misskeyのドメイン固有の概念は`Mi`をprefixする
-例えばGoogleが自社サービスをMap、Earth、DriveではなくGoogle Map、Google Earth、Google Driveのように命名するのと同じ
-コード上でMisskeyのドメイン固有の概念には`Mi`をprefixすることで、他のドメインの同様の概念と区別できるほか、名前の衝突を防ぐ。
-ただし、文脈上Misskeyのものを指すことが明らかであり、名前の衝突の恐れがない場合は、一時的なローカル変数に限って`Mi`を省略してもよい。
-
-### Misskey.jsの型生成
-```bash
-pnpm build-misskey-js-with-types
-```
-
 ### How to resolve conflictions occurred at pnpm-lock.yaml?
 
 Just execute `pnpm` to fix it.
@@ -581,6 +413,27 @@ pnpm dlx typeorm migration:generate -d ormconfig.js -o <migration name>
 - 生成後、ファイルをmigration下に移してください
 - 作成されたスクリプトは不必要な変更を含むため除去してください
 
+### JSON SchemaのobjectでanyOfを使うとき
+JSON Schemaで、objectに対してanyOfを使う場合、anyOfの中でpropertiesを定義しないこと。  
+バリデーションが効かないため。（SchemaTypeもそのように作られており、objectのanyOf内のpropertiesは捨てられます）  
+https://github.com/misskey-dev/misskey/pull/10082
+
+テキストhogeおよびfugaについて、片方を必須としつつ両方の指定もありうる場合:
+
+```
+export const paramDef = {
+	type: 'object',
+	properties: {
+		hoge: { type: 'string', minLength: 1 },
+		fuga: { type: 'string', minLength: 1 },
+	},
+	anyOf: [
+		{ required: ['hoge'] },
+		{ required: ['fuga'] },
+	],
+} as const;
+```
+
 ### コネクションには`markRaw`せよ
 **Vueのコンポーネントのdataオプションとして**misskey.jsのコネクションを設定するとき、必ず`markRaw`でラップしてください。インスタンスが不必要にリアクティブ化されることで、misskey.js内の処理で不具合が発生するとともに、パフォーマンス上の問題にも繋がる。なお、Composition APIを使う場合はこの限りではない(リアクティブ化はマニュアルなため)。
 
@@ -594,27 +447,3 @@ marginはそのコンポーネントを使う側が設定する
 ## その他
 ### HTMLのクラス名で follow という単語は使わない
 広告ブロッカーで誤ってブロックされる
-
-### indexというファイル名を使うな
-ESMではディレクトリインポートは廃止されているのと、ディレクトリインポートせずともファイル名が index だと何故か一部のライブラリ？でディレクトリインポートだと見做されてエラーになる
-
-## CSS Recipe
-
-### Lighten CSS vars
-
-``` css
-color: hsl(from var(--MI_THEME-accent) h s calc(l + 10));
-```
-
-### Darken CSS vars
-
-``` css
-color: hsl(from var(--MI_THEME-accent) h s calc(l - 10));
-```
-
-### Add alpha to CSS vars
-
-``` css
-color: color(from var(--MI_THEME-accent) srgb r g b / 0.5);
-```
-

COPYING

@@ -1,5 +1,5 @@
 Unless otherwise stated this repository is
-Copyright © 2014-2025 syuilo and contributors
+Copyright © 2014-2023 syuilo and contributers
 
 And is distributed under The GNU Affero General Public License Version 3, you should have received a copy of the license file as LICENSE.
 

Dockerfile

@@ -1,6 +1,6 @@
 # syntax = docker/dockerfile:1.4
 
-ARG NODE_VERSION=22.15.0-bookworm
+ARG NODE_VERSION=18.16.0-bullseye
 
 # build assets & compile TypeScript
 
@@ -14,29 +14,24 @@ RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
 	&& apt-get install -yqq --no-install-recommends \
 	build-essential
 
+RUN corepack enable
+
 WORKDIR /misskey
 
 COPY --link ["pnpm-lock.yaml", "pnpm-workspace.yaml", "package.json", "./"]
 COPY --link ["scripts", "./scripts"]
 COPY --link ["packages/backend/package.json", "./packages/backend/"]
-COPY --link ["packages/frontend-shared/package.json", "./packages/frontend-shared/"]
 COPY --link ["packages/frontend/package.json", "./packages/frontend/"]
-COPY --link ["packages/frontend-embed/package.json", "./packages/frontend-embed/"]
-COPY --link ["packages/icons-subsetter/package.json", "./packages/icons-subsetter/"]
 COPY --link ["packages/sw/package.json", "./packages/sw/"]
 COPY --link ["packages/misskey-js/package.json", "./packages/misskey-js/"]
-COPY --link ["packages/misskey-reversi/package.json", "./packages/misskey-reversi/"]
-COPY --link ["packages/misskey-bubble-game/package.json", "./packages/misskey-bubble-game/"]
-
-ARG NODE_ENV=production
-
-RUN node -e "console.log(JSON.parse(require('node:fs').readFileSync('./package.json')).packageManager)" | xargs npm install -g
 
 RUN --mount=type=cache,target=/root/.local/share/pnpm/store,sharing=locked \
 	pnpm i --frozen-lockfile --aggregate-output
 
 COPY --link . ./
 
+ARG NODE_ENV=production
+
 RUN git submodule update --init
 RUN pnpm build
 RUN rm -rf .git/
@@ -49,18 +44,13 @@ RUN apt-get update \
 	&& apt-get install -yqq --no-install-recommends \
 	build-essential
 
+RUN corepack enable
+
 WORKDIR /misskey
 
 COPY --link ["pnpm-lock.yaml", "pnpm-workspace.yaml", "package.json", "./"]
 COPY --link ["scripts", "./scripts"]
 COPY --link ["packages/backend/package.json", "./packages/backend/"]
-COPY --link ["packages/misskey-js/package.json", "./packages/misskey-js/"]
-COPY --link ["packages/misskey-reversi/package.json", "./packages/misskey-reversi/"]
-COPY --link ["packages/misskey-bubble-game/package.json", "./packages/misskey-bubble-game/"]
-
-ARG NODE_ENV=production
-
-RUN node -e "console.log(JSON.parse(require('node:fs').readFileSync('./package.json')).packageManager)" | xargs npm install -g
 
 RUN --mount=type=cache,target=/root/.local/share/pnpm/store,sharing=locked \
 	pnpm i --frozen-lockfile --aggregate-output
@@ -72,36 +62,25 @@ ARG GID="991"
 
 RUN apt-get update \
 	&& apt-get install -y --no-install-recommends \
-	ffmpeg tini curl libjemalloc-dev libjemalloc2 \
+	ffmpeg tini curl \
-	&& ln -s /usr/lib/$(uname -m)-linux-gnu/libjemalloc.so.2 /usr/local/lib/libjemalloc.so \
+	&& corepack enable \
 	&& groupadd -g "${GID}" misskey \
 	&& useradd -l -u "${UID}" -g "${GID}" -m -d /misskey misskey \
-	&& find / -type d -path /sys -prune -o -type d -path /proc -prune -o -type f -perm /u+s -ignore_readdir_race -exec chmod u-s {} \; \
+	&& find / -type d -path /proc -prune -o -type f -perm /u+s -ignore_readdir_race -exec chmod u-s {} \; \
-	&& find / -type d -path /sys -prune -o -type d -path /proc -prune -o -type f -perm /g+s -ignore_readdir_race -exec chmod g-s {} \; \
+	&& find / -type d -path /proc -prune -o -type f -perm /g+s -ignore_readdir_race -exec chmod g-s {} \; \
 	&& apt-get clean \
 	&& rm -rf /var/lib/apt/lists
 
-# add package.json to add pnpm
-COPY ./package.json ./package.json
-RUN node -e "console.log(JSON.parse(require('node:fs').readFileSync('./package.json')).packageManager)" | xargs npm install -g
-
 USER misskey
 WORKDIR /misskey
 
 COPY --chown=misskey:misskey --from=target-builder /misskey/node_modules ./node_modules
 COPY --chown=misskey:misskey --from=target-builder /misskey/packages/backend/node_modules ./packages/backend/node_modules
-COPY --chown=misskey:misskey --from=target-builder /misskey/packages/misskey-js/node_modules ./packages/misskey-js/node_modules
-COPY --chown=misskey:misskey --from=target-builder /misskey/packages/misskey-reversi/node_modules ./packages/misskey-reversi/node_modules
-COPY --chown=misskey:misskey --from=target-builder /misskey/packages/misskey-bubble-game/node_modules ./packages/misskey-bubble-game/node_modules
 COPY --chown=misskey:misskey --from=native-builder /misskey/built ./built
-COPY --chown=misskey:misskey --from=native-builder /misskey/packages/misskey-js/built ./packages/misskey-js/built
-COPY --chown=misskey:misskey --from=native-builder /misskey/packages/misskey-reversi/built ./packages/misskey-reversi/built
-COPY --chown=misskey:misskey --from=native-builder /misskey/packages/misskey-bubble-game/built ./packages/misskey-bubble-game/built
 COPY --chown=misskey:misskey --from=native-builder /misskey/packages/backend/built ./packages/backend/built
 COPY --chown=misskey:misskey --from=native-builder /misskey/fluent-emojis /misskey/fluent-emojis
 COPY --chown=misskey:misskey . ./
 
-ENV LD_PRELOAD=/usr/local/lib/libjemalloc.so
 ENV NODE_ENV=production
 HEALTHCHECK --interval=5s --retries=20 CMD ["/bin/bash", "/misskey/healthcheck.sh"]
 ENTRYPOINT ["/usr/bin/tini", "--"]

README.md

@@ -1,18 +1,16 @@
 <div align="center">
 <a href="https://misskey-hub.net">
-	<img src="./assets/title_float.svg" alt="Misskey logo" style="border-radius:50%" width="300"/>
+	<img src="./assets/title_float.svg" alt="Misskey logo" style="border-radius:50%" width="400"/>
 </a>
-
+	
-**🌎 **Misskey** is an open source, federated social media platform that's free forever! 🚀**
+**🌎 **[Misskey](https://misskey-hub.net/)** is an open source, decentralized social media platform that's free forever! 🚀**
-
+	
-[Learn more](https://misskey-hub.net/)
-
 ---
 
-<a href="https://misskey-hub.net/servers/">
+<a href="https://misskey-hub.net/instances.html">
 		<img src="https://custom-icon-badges.herokuapp.com/badge/find_an-instance-acea31?logoColor=acea31&style=for-the-badge&logo=misskey&labelColor=363B40" alt="find an instance"/></a>
 
-<a href="https://misskey-hub.net/docs/for-admin/install/guides/">
+<a href="https://misskey-hub.net/docs/install.html">
 		<img src="https://custom-icon-badges.herokuapp.com/badge/create_an-instance-FBD53C?logoColor=FBD53C&style=for-the-badge&logo=server&labelColor=363B40" alt="create an instance"/></a>
 
 <a href="./CONTRIBUTING.md">
@@ -23,15 +21,46 @@
 
 <a href="https://www.patreon.com/syuilo">
 		<img src="https://custom-icon-badges.herokuapp.com/badge/become_a-patron-F96854?logoColor=F96854&style=for-the-badge&logo=patreon&labelColor=363B40" alt="become a patron"/></a>
+	
+---
+
+[![codecov](https://codecov.io/gh/misskey-dev/misskey/branch/develop/graph/badge.svg?token=R6IQZ3QJOL)](https://codecov.io/gh/misskey-dev/misskey)
 
 </div>
 
+<div>
+
+<a href="https://xn--931a.moe/"><img src="https://github.com/misskey-dev/misskey/blob/develop/assets/ai.png?raw=true" align="right" height="320px"/></a>
+
+## ✨ Features
+- **ActivityPub support**\
+Not on Misskey? No problem! Not only can Misskey instances talk to each other, but you can make friends with people on other networks like Mastodon and Pixelfed!
+- **Reactions**\
+You can add emoji reactions to any post! No longer are you bound by a like button, show everyone exactly how you feel with the tap of a button.
+- **Drive**\
+With Misskey's built in drive, you get cloud storage right in your social media, where you can upload any files, make folders, and find media from posts you've made!
+- **Rich Web UI**\
+	Misskey has a rich and easy to use Web UI!
+	It is highly customizable, from changing the layout and adding widgets to making custom themes.
+	Furthermore, plugins can be created using AiScript, an original programming language.
+- And much more...
+
+</div>
+
+<div style="clear: both;"></div>
+
+## Documentation
+
+Misskey Documentation can be found at [Misskey Hub](https://misskey-hub.net/), some of the links and graphics above also lead to specific portions of it.
+
+## Sponsors
+
+<div align="center">
+	<a class="rss3" title="RSS3" href="https://rss3.io/" target="_blank"><img src="https://rss3.mypinata.cloud/ipfs/QmUG6H3Z7D5P511shn7sB4CPmpjH5uZWu4m5mWX7U3Gqbu" alt="RSS3" height="60"></a>
+</div>
+
 ## Thanks
 
-<a href="https://sentry.io/"><img src="https://github.com/misskey-dev/misskey/assets/4439005/98576556-222f-467a-94be-e98dbda1d852" height="30" alt="Sentry" /></a>
-
-Thanks to [Sentry](https://sentry.io/) for providing the error tracking platform that helps us catch unexpected errors.
-
 <a href="https://www.chromatic.com/"><img src="https://user-images.githubusercontent.com/321738/84662277-e3db4f80-af1b-11ea-88f5-91d67a5e59f6.png" height="30" alt="Chromatic" /></a>
 
 Thanks to [Chromatic](https://www.chromatic.com/) for providing the visual testing platform that helps us review UI changes and catch visual regressions.

ROADMAP.md

@@ -6,7 +6,6 @@ Also, the later tasks are more indefinite and are subject to change as developme
 This is the phase we are at now. We need to make a high-maintenance environment that can withstand future development.
 
 - ~~Make the number of type errors zero (backend)~~ → Done ✔️
-- Make the number of type errors zero (frontend)
 - Improve CI
 	- ~~Fix tests~~ → Done ✔️
 	- Fix random test failures - https://github.com/misskey-dev/misskey/issues/7985 and https://github.com/misskey-dev/misskey/issues/7986
@@ -23,7 +22,7 @@ This is the phase we are at now. We need to make a high-maintenance environment
 Once Phase 1 is complete and an environment conducive to the development of a stable system is in place, the implementation of new functions can begin gradually.
 
 - Improve features for moderation
-- ~~OAuth2 support https://github.com/misskey-dev/misskey/issues/8262~~ → Done ✔️
+- OAuth2 support https://github.com/misskey-dev/misskey/issues/8262
 - GraphQL support?
 
 ## (3) Improve scalability

SECURITY.md

@@ -1,20 +1,9 @@
 # Reporting Security Issues
 
-If you discover a security issue in Misskey, please report it by **[this form](https://github.com/misskey-dev/misskey/security/advisories/new)**.
+If you discover a security issue in Misskey, please report it by sending an
+email to [syuilotan@yahoo.co.jp](mailto:syuilotan@yahoo.co.jp).
 
 This will allow us to assess the risk, and make a fix available before we add a
 bug report to the GitHub repository.
 
 Thanks for helping make Misskey safe for everyone.
-
-> [!note]
-> CNA [requires](https://www.cve.org/ResourcesSupport/AllResources/CNARules#section_5-2_Description) that CVEs include a description in English for inclusion in the CVE Catalog.
-> 
-> When creating a security advisory, all content must be written in English (it is acceptable to include a non-English description along with the English one).
-
-## When create a patch
-
-If you can also create a patch to fix the vulnerability, please create a PR on the private fork.
-
-> [!note]
-> There is a GitHub bug that prevents merging if a PR not following the develop branch of upstream, so please keep follow the develop branch.

assets/title_float.svg

@@ -23,13 +23,13 @@
     </rdf:RDF>
   </metadata>
 	<style>
-		#g8 {
+		#g8 { 
     	animation-name: floating;
     	animation-duration: 3s;
     	animation-iteration-count: infinite;
    	 	animation-timing-function: ease-in-out;
 		}
-
+ 
 		@keyframes floating {
     	0% { transform: translate(0,  0px); }
     	50% { transform: translate(0, -5px); }

chart/files/default.yml

@@ -77,17 +77,17 @@ dbReplications: false
 # You can configure any number of replicas here
 #dbSlaves:
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 #  -
-#    host:
+#    host: 
-#    port:
+#    port: 
-#    db:
+#    db: 
-#    user:
+#    user: 
-#    pass:
+#    pass: 
 
 #   ┌─────────────────────┐
 #───┘ Redis configuration └─────────────────────────────────────
@@ -116,22 +116,6 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
-#redisForTimelines:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
-#redisForReactions:
-#  host: redis
-#  port: 6379
-#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
-#  #pass: example-pass
-#  #prefix: example-prefix
-#  #db: 1
-
 #   ┌───────────────────────────┐
 #───┘ MeiliSearch configuration └─────────────────────────────
 
@@ -151,7 +135,6 @@ redis:
 
 # Available methods:
 # aid ... Short, Millisecond accuracy
-# aidx ... Millisecond accuracy
 # meid ... Similar to ObjectID, Millisecond accuracy
 # ulid ... Millisecond accuracy
 # objectid ... This is left for backward compatibility
@@ -159,28 +142,7 @@ redis:
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # ID SETTINGS AFTER THAT!
 
-id: "aidx"
+id: "aid"
-
-#   ┌────────────────┐
-#───┘ Error tracking └──────────────────────────────────────────
-
-# Sentry is available for error tracking.
-# See the Sentry documentation for more details on options.
-
-#sentryForBackend:
-#  enableNodeProfiling: true
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
-#sentryForFrontend:
-#  vueIntegration:
-#    tracingOptions:
-#      trackComponents: true
-#  browserTracingIntegration:
-#  replayIntegration:
-#  options:
-#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
-
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 
@@ -196,7 +158,7 @@ id: "aidx"
 
 # Job rate limiter
 # deliverJobPerSec: 128
-# inboxJobPerSec: 32
+# inboxJobPerSec: 16
 
 # Job attempts
 # deliverJobMaxAttempts: 12
@@ -221,6 +183,9 @@ id: "aidx"
 # Media Proxy
 #mediaProxy: https://example.com/proxy
 
+# Sign to ActivityPub GET request (default: true)
+signToActivityPubGet: true
+
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
 #]

chart/templates/Deployment.yml

@@ -27,7 +27,7 @@ spec:
           ports:
             - containerPort: 3000
         - name: postgres
-          image: postgres:15-alpine
+          image: postgres:14-alpine
           env:
             - name: POSTGRES_USER
               value: "example-misskey-user"
@@ -38,7 +38,7 @@ spec:
           ports:
             - containerPort: 5432
         - name: redis
-          image: redis:7-alpine
+          image: redis:alpine
           ports:
             - containerPort: 6379
       volumes:

compose.local-db.yml

@@ -1,40 +0,0 @@
-# このconfigは、 dockerでMisskey本体を起動せず、 redisとpostgresql などだけを起動します
-
-services:
-  redis:
-    restart: always
-    image: redis:7-alpine
-    ports:
-      - "6379:6379"
-    volumes:
-      - ./redis:/data
-    healthcheck:
-      test: "redis-cli ping"
-      interval: 5s
-      retries: 20
-
-  db:
-    restart: always
-    image: postgres:15-alpine
-    ports:
-      - "5432:5432"
-    env_file:
-      - .config/docker.env
-    volumes:
-      - ./db:/var/lib/postgresql/data
-    healthcheck:
-      test: "pg_isready -U $$POSTGRES_USER -d $$POSTGRES_DB"
-      interval: 5s
-      retries: 20
-
-#  meilisearch:
-#    restart: always
-#    image: getmeili/meilisearch:v1.3.4
-#    environment:
-#      - MEILI_NO_ANALYTICS=true
-#      - MEILI_ENV=production
-#    env_file:
-#      - .config/meilisearch.env
-#    volumes:
-#      - ./meili_data:/meili_data
-

cypress.config.ts

@@ -2,6 +2,11 @@ import { defineConfig } from 'cypress'
 
 export default defineConfig({
   e2e: {
+    // We've imported your old cypress plugins here.
+    // You may want to clean this up later by importing these.
+    setupNodeEvents(on, config) {
+      return require('./cypress/plugins/index.js')(on, config)
+    },
     baseUrl: 'http://localhost:61812',
   },
 })

cypress/e2e/basic.cy.js

@@ -1,8 +1,3 @@
-/*
- * SPDX-FileCopyrightText: syuilo and misskey-project
- * SPDX-License-Identifier: AGPL-3.0-only
- */
-
 describe('Before setup instance', () => {
 	beforeEach(() => {
 		cy.resetState();
@@ -23,7 +18,6 @@ describe('Before setup instance', () => {
 
 		cy.intercept('POST', '/api/admin/accounts/create').as('signup');
 
-		cy.get('[data-cy-admin-initial-password] input').type('example_password_please_change_this_or_you_will_get_hacked');
 		cy.get('[data-cy-admin-username] input').type('admin');
 		cy.get('[data-cy-admin-password] input').type('admin1234');
 		cy.get('[data-cy-admin-ok]').click();
@@ -31,15 +25,6 @@ describe('Before setup instance', () => {
 		// なぜか動かない
 		//cy.wait('@signup').should('have.property', 'response.statusCode');
 		cy.wait('@signup');
-
-		cy.intercept('POST', '/api/admin/update-meta').as('update-meta');
-
-		cy.get('[data-cy-next]').click();
-		cy.get('[data-cy-next]').click();
-		cy.get('[data-cy-server-name] input').type('Testskey');
-		cy.get('[data-cy-server-setup-wizard-apply]').click();
-
-		cy.wait('@update-meta');
   });
 });
 
@@ -69,10 +54,9 @@ describe('After setup instance', () => {
 		cy.get('[data-cy-signup]').click();
 		cy.get('[data-cy-signup-rules-continue]').should('be.disabled');
 		cy.get('[data-cy-signup-rules-notes-agree] [data-cy-switch-toggle]').click();
-		cy.get('[data-cy-modal-dialog-ok]').click();
 		cy.get('[data-cy-signup-rules-continue]').should('not.be.disabled');
 		cy.get('[data-cy-signup-rules-continue]').click();
-
+	
 		cy.get('[data-cy-signup-submit]').should('be.disabled');
 		cy.get('[data-cy-signup-username] input').type('alice');
 		cy.get('[data-cy-signup-submit]').should('be.disabled');
@@ -94,7 +78,6 @@ describe('After setup instance', () => {
 		cy.get('[data-cy-signup]').click();
 		cy.get('[data-cy-signup-rules-continue]').should('be.disabled');
 		cy.get('[data-cy-signup-rules-notes-agree] [data-cy-switch-toggle]').click();
-		cy.get('[data-cy-modal-dialog-ok]').click();
 		cy.get('[data-cy-signup-rules-continue]').should('not.be.disabled');
 		cy.get('[data-cy-signup-rules-continue]').click();
 
@@ -129,16 +112,11 @@ describe('After user signup', () => {
 	it('signin', () => {
 		cy.visitHome();
 
-		cy.intercept('POST', '/api/signin-flow').as('signin');
+		cy.intercept('POST', '/api/signin').as('signin');
 
 		cy.get('[data-cy-signin]').click();
-
+		cy.get('[data-cy-signin-username] input').type('alice');
-		cy.get('[data-cy-signin-page-input]').should('be.visible', { timeout: 1000 });
+		// Enterキーでサインインできるかの確認も兼ねる
-		// Enterキーで続行できるかの確認も兼ねる
-		cy.get('[data-cy-signin-username] input').type('alice{enter}');
-
-		cy.get('[data-cy-signin-page-password]').should('be.visible', { timeout: 10000 });
-		// Enterキーで続行できるかの確認も兼ねる
 		cy.get('[data-cy-signin-password] input').type('alice1234{enter}');
 
 		cy.wait('@signin');
@@ -153,9 +131,8 @@ describe('After user signup', () => {
 		cy.visitHome();
 
 		cy.get('[data-cy-signin]').click();
-
+		cy.get('[data-cy-signin-username] input').type('alice');
-		cy.get('[data-cy-signin-page-input]').should('be.visible', { timeout: 1000 });
+		cy.get('[data-cy-signin-password] input').type('alice1234{enter}');
-		cy.get('[data-cy-signin-username] input').type('alice{enter}');
 
 		// TODO: cypressにブラウザの言語指定できる機能が実装され次第英語のみテストするようにする
 		cy.contains(/アカウントが凍結されています|This account has been suspended due to/gi);
@@ -182,13 +159,11 @@ describe('After user signed in', () => {
 	});
 
   it('successfully loads', () => {
-		// 表示に時間がかかるのでデフォルト秒数だとタイムアウトする
+		cy.get('[data-cy-user-setup-continue]').should('be.visible');
-		cy.get('[data-cy-user-setup-continue]', { timeout: 30000 }).should('be.visible');
   });
 
 	it('account setup wizard', () => {
-		// 表示に時間がかかるのでデフォルト秒数だとタイムアウトする
+		cy.get('[data-cy-user-setup-continue]').click();
-		cy.get('[data-cy-user-setup-continue]', { timeout: 30000 }).click();
 
 		cy.get('[data-cy-user-setup-user-name] input').type('ありす');
 		cy.get('[data-cy-user-setup-user-description] textarea').type('ほげ');
@@ -225,8 +200,7 @@ describe('After user setup', () => {
 		cy.login('alice', 'alice1234');
 
 		// アカウント初期設定ウィザード
-		// 表示に時間がかかるのでデフォルト秒数だとタイムアウトする
+		cy.get('[data-cy-user-setup] [data-cy-modal-window-close]').click();
-		cy.get('[data-cy-user-setup] [data-cy-modal-window-close]', { timeout: 30000 }).click();
 		cy.get('[data-cy-modal-dialog-ok]').click();
 	});
 
@@ -242,7 +216,7 @@ describe('After user setup', () => {
 		cy.get('[data-cy-post-form-text]').type('Hello, Misskey!');
 		cy.get('[data-cy-open-post-form-submit]').click();
 
-		cy.contains('Hello, Misskey!', { timeout: 15000 });
+		cy.contains('Hello, Misskey!');
   });
 
 	it('open note form with hotkey', () => {

cypress/e2e/router.cy.ts

@@ -1,35 +0,0 @@
-/*
- * SPDX-FileCopyrightText: syuilo and misskey-project
- * SPDX-License-Identifier: AGPL-3.0-only
- */
-
-describe('Router transition', () => {
-	describe('Redirect', () => {
-		// サーバの初期化。ルートのテストに関しては各describeごとに1度だけ実行で十分だと思う（使いまわした方が早い）
-		before(() => {
-			cy.resetState();
-
-			// インスタンス初期セットアップ
-			cy.registerUser('admin', 'pass', true);
-
-			// ユーザー作成
-			cy.registerUser('alice', 'alice1234');
-
-			cy.login('alice', 'alice1234');
-
-			// アカウント初期設定ウィザード
-			// 表示に時間がかかるのでデフォルト秒数だとタイムアウトする
-			cy.get('[data-cy-user-setup] [data-cy-modal-window-close]', { timeout: 30000 }).click();
-			cy.wait(500);
-			cy.get('[data-cy-modal-dialog-ok]').click();
-		});
-
-		it('redirect to user profile', () => {
-			// テストのためだけに用意されたリダイレクト用ルートに飛ぶ
-			cy.visit('/redirect-test');
-
-			// プロフィールページのURLであることを確認する
-			cy.url().should('include', '/@alice')
-		});
-	});
-});

cypress/e2e/widgets.cy.js

@@ -1,9 +1,3 @@
-/*
- * SPDX-FileCopyrightText: syuilo and misskey-project
- * SPDX-License-Identifier: AGPL-3.0-only
- */
-
-/* flaky
 describe('After user signed in', () => {
 	beforeEach(() => {
 		cy.resetState();
@@ -73,4 +67,3 @@ describe('After user signed in', () => {
 	buildWidgetTest('aiscript');
 	buildWidgetTest('aichan');
 });
-*/

cypress/plugins/index.js

@@ -0,0 +1,22 @@
+/// <reference types="cypress" />
+// ***********************************************************
+// This example plugins/index.js can be used to load plugins
+//
+// You can change the location of this file or turn off loading
+// the plugins file with the 'pluginsFile' configuration option.
+//
+// You can read more here:
+// https://on.cypress.io/plugins-guide
+// ***********************************************************
+
+// This function is called when a project is opened or re-opened (e.g. due to
+// the project's config changing)
+
+/**
+ * @type {Cypress.PluginConfig}
+ */
+// eslint-disable-next-line no-unused-vars
+module.exports = (on, config) => {
+  // `on` is used to hook into various events Cypress emits
+  // `config` is the resolved Cypress config
+}

cypress/support/commands.js

@@ -30,13 +30,9 @@ Cypress.Commands.add('visitHome', () => {
 })
 
 Cypress.Commands.add('resetState', () => {
-	// iframe.contentWindow.indexedDB.deleteDatabase() がchromeのバグで使用できないため、indexedDBを無効化している。
+	cy.window(win => {
-	// see https://github.com/misskey-dev/misskey/issues/13605#issuecomment-2053652123
-	/*
-	cy.window().then(win => {
 		win.indexedDB.deleteDatabase('keyval-store');
 	});
-	 */
 	cy.request('POST', '/api/reset-db', {}).as('reset');
 	cy.get('@reset').its('status').should('equal', 204);
 	cy.reload(true);
@@ -48,19 +44,16 @@ Cypress.Commands.add('registerUser', (username, password, isAdmin = false) => {
 	cy.request('POST', route, {
 		username: username,
 		password: password,
-		...(isAdmin ? { setupPassword: 'example_password_please_change_this_or_you_will_get_hacked' } : {}),
 	}).its('body').as(username);
 });
 
 Cypress.Commands.add('login', (username, password) => {
 	cy.visitHome();
 
-	cy.intercept('POST', '/api/signin-flow').as('signin');
+	cy.intercept('POST', '/api/signin').as('signin');
 
 	cy.get('[data-cy-signin]').click();
-	cy.get('[data-cy-signin-page-input]').should('be.visible', { timeout: 1000 });
+	cy.get('[data-cy-signin-username] input').type(username);
-	cy.get('[data-cy-signin-username] input').type(`${username}{enter}`);
-	cy.get('[data-cy-signin-page-password]').should('be.visible', { timeout: 10000 });
 	cy.get('[data-cy-signin-password] input').type(`${password}{enter}`);
 
 	cy.wait('@signin').as('signedIn');

cypress/support/index.ts

@@ -1,19 +0,0 @@
-declare global {
-	namespace Cypress {
-		interface Chainable {
-			login(username: string, password: string): Chainable<void>;
-
-			registerUser(
-				username: string,
-				password: string,
-				isAdmin?: boolean
-			): Chainable<void>;
-
-			resetState(): Chainable<void>;
-
-			visitHome(): Chainable<void>;
-		}
-	}
-}
-
-export {}

cypress/tsconfig.json

@@ -1,8 +0,0 @@
-{
-	"compilerOptions": {
-		"lib": ["dom", "es5"],
-		"target": "es5",
-		"types": ["cypress", "node"]
-	},
-	"include": ["./**/*.ts"]
-}

docker-compose.yml.example

@@ -1,3 +1,5 @@
+version: "3"
+
 services:
   web:
     build: .
@@ -5,7 +7,6 @@ services:
     links:
       - db
       - redis
-#     - mcaptcha
 #     - meilisearch
     depends_on:
       db:
@@ -17,8 +18,6 @@ services:
     networks:
       - internal_network
       - external_network
-    # env_file:
-    #   - .config/docker.env
     volumes:
       - ./files:/misskey/files
       - ./.config:/misskey/.config:ro
@@ -49,39 +48,9 @@ services:
       interval: 5s
       retries: 20
 
-#  mcaptcha:
-#    restart: always
-#    image: mcaptcha/mcaptcha:latest
-#    networks:
-#      internal_network:
-#      external_network:
-#        aliases:
-#          - localhost
-#    ports:
-#      - 7493:7493
-#    env_file:
-#      - .config/docker.env
-#    environment:
-#      PORT: 7493
-#      MCAPTCHA_redis_URL: "redis://mcaptcha_redis/"
-#    depends_on:
-#      db:
-#        condition: service_healthy
-#      mcaptcha_redis:
-#        condition: service_healthy
-#
-#  mcaptcha_redis:
-#    image: mcaptcha/cache:latest
-#    networks:
-#      - internal_network
-#    healthcheck:
-#      test: "redis-cli ping"
-#      interval: 5s
-#      retries: 20
-
 #  meilisearch:
 #    restart: always
-#    image: getmeili/meilisearch:v1.3.4
+#    image: getmeili/meilisearch:v1.1.1
 #    environment:
 #      - MEILI_NO_ANALYTICS=true
 #      - MEILI_ENV=production

gulpfile.js

@@ -0,0 +1,65 @@
+/**
+ * Gulp tasks
+ */
+
+const fs = require('fs');
+const gulp = require('gulp');
+const replace = require('gulp-replace');
+const terser = require('gulp-terser');
+const cssnano = require('gulp-cssnano');
+
+const locales = require('./locales');
+const meta = require('./package.json');
+
+gulp.task('copy:backend:views', () =>
+	gulp.src('./packages/backend/src/server/web/views/**/*').pipe(gulp.dest('./packages/backend/built/server/web/views'))
+);
+
+gulp.task('copy:frontend:fonts', () =>
+	gulp.src('./packages/frontend/node_modules/three/examples/fonts/**/*').pipe(gulp.dest('./built/_frontend_dist_/fonts/'))
+);
+
+gulp.task('copy:frontend:tabler-icons', () =>
+	gulp.src('./packages/frontend/node_modules/@tabler/icons-webfont/**/*').pipe(gulp.dest('./built/_frontend_dist_/tabler-icons/'))
+);
+
+gulp.task('copy:frontend:locales', cb => {
+	fs.mkdirSync('./built/_frontend_dist_/locales', { recursive: true });
+
+	const v = { '_version_': meta.version };
+
+	for (const [lang, locale] of Object.entries(locales)) {
+		fs.writeFileSync(`./built/_frontend_dist_/locales/${lang}.${meta.version}.json`, JSON.stringify({ ...locale, ...v }), 'utf-8');
+	}
+
+	cb();
+});
+
+gulp.task('build:backend:script', () => {
+	return gulp.src(['./packages/backend/src/server/web/boot.js', './packages/backend/src/server/web/bios.js', './packages/backend/src/server/web/cli.js'])
+		.pipe(replace('LANGS', JSON.stringify(Object.keys(locales))))
+		.pipe(terser({
+			toplevel: true
+		}))
+		.pipe(gulp.dest('./packages/backend/built/server/web/'));
+});
+
+gulp.task('build:backend:style', () => {
+	return gulp.src(['./packages/backend/src/server/web/style.css', './packages/backend/src/server/web/bios.css', './packages/backend/src/server/web/cli.css', './packages/backend/src/server/web/error.css'])
+		.pipe(cssnano({
+			zindex: false
+		}))
+		.pipe(gulp.dest('./packages/backend/built/server/web/'));
+});
+
+gulp.task('build', gulp.parallel(
+	'copy:frontend:locales', 'copy:backend:views', 'build:backend:script', 'build:backend:style', 'copy:frontend:fonts', 'copy:frontend:tabler-icons'
+));
+
+gulp.task('default', gulp.task('build'));
+
+gulp.task('watch', () => {
+	gulp.watch([
+		'./packages/*/src/**/*',
+	], { ignoreInitial: false }, gulp.task('build'));
+});

healthcheck.sh

@@ -1,7 +1,4 @@
 #!/bin/bash
 
-# SPDX-FileCopyrightText: syuilo and misskey-project
-# SPDX-License-Identifier: AGPL-3.0-only
-
 PORT=$(grep '^port:' /misskey/.config/default.yml | awk 'NR==1{print $2; exit}')
-curl -Sfso/dev/null "http://localhost:${PORT}/healthz"
+curl -s -S -o /dev/null "http://localhost:${PORT}"

idea/README.md

@@ -1 +0,0 @@
-使われなくなったけど消すのは勿体ない(将来使えるかもしれない)コードを入れておくとこ

locales/ar-SA.yml

@@ -41,23 +41,17 @@ unfavorite: "إزالة من المفضلة"
 favorited: "أُضيف إلى المفضلة."
 alreadyFavorited: "تمت إضافته بالفعل إلى المفضلة."
 cantFavorite: "تعذرت الإضافة إلى المفضلة."
-pin: "ثبتها على الصفحة الشخصية"
+pin: "دبّسها على الصفحة الشخصية"
-unpin: "فكها من ملفك الشخصي"
+unpin: "ألغ تدبيسها من ملفك الشخصي"
 copyContent: "انسخ المحتوى"
 copyLink: "انسخ الرابط"
 delete: "حذف"
 deleteAndEdit: "إزالة وإعادة الصياغة"
 deleteAndEditConfirm: "أمتأكد من حذف الملاحظة؟ ستفقد كل مشاركاتها، والتفاعلات، والردود عليها."
 addToList: "أضفه إلى قائمة"
-addToAntenna: "أضف إلى هوائي"
 sendMessage: "أرسل رسالة"
 copyRSS: "انسخ رابط RSS"
 copyUsername: "انسخ اسم المستخدم"
-copyUserId: "انسخ معرف المستخدم"
-copyNoteId: "انسخ معرف الملاحظة"
-copyFileId: "انسخ معرّف الملف"
-copyFolderId: "انسخ معرّف المجلد"
-copyProfileUrl: "انسخ رابط الملف الشخصي"
 searchUser: "ابحث عن مستخدمين"
 reply: "رد"
 loadMore: "عرض المزيد"
@@ -112,18 +106,18 @@ cantReRenote: "لا يمكنك إعادة نشر ملاحظة معاد نشره
 quote: "اقتبس"
 inChannelRenote: "إعادة نشر في قناة"
 inChannelQuote: "اقتباس في قناة"
-pinnedNote: "ملاحظة مثبتة"
+pinnedNote: "ملاحظة مدبسة"
-pinned: "ثبتها على الصفحة الشخصية"
+pinned: "دبّسها على الصفحة الشخصية"
 you: "أنت"
 clickToShow: "اضغط للعرض"
 sensitive: "محتوى حساس"
 add: "إضافة"
 reaction: "التفاعلات"
 reactions: "التفاعلات"
+reactionSetting: "التفاعلات المراد عرضها في منتقي التفاعلات."
 reactionSettingDescription2: "اسحب لترتيب ، انقر للحذف ، استخدم \"+\" للإضافة."
 rememberNoteVisibility: "تذكر إعدادت مدى رؤية الملاحظات"
 attachCancel: "أزل المرفق"
-deleteFile: "حُذف الملف"
 markAsSensitive: "علّمه كمحتوى حساس"
 unmarkAsSensitive: "ألغ تعيينه كمحتوى حساس"
 enterFileName: "ادخل اسم الملف"
@@ -140,10 +134,8 @@ unblockConfirm: "أمتأكد من إلغاء حجب هذا الحساب؟"
 suspendConfirm: "أمتأكد من تعليق الحساب؟"
 unsuspendConfirm: "أمتأكد من إلغاء تعليق؟"
 selectList: "اختر قائمة"
-editList: "عدّل القائمة"
 selectChannel: "اختر قناة"
 selectAntenna: "اختر هوائيًا"
-editAntenna: "عدّل الهوائي"
 selectWidget: "اختر ودجة"
 editWidgets: "عدّل الودجات"
 editWidgetsExit: "تم"
@@ -214,7 +206,8 @@ blockedUsers: "الحسابات المحجوبة"
 noUsers: "ليس هناك مستخدمون"
 editProfile: "تعديل الملف التعريفي"
 noteDeleteConfirm: "هل تريد حذف هذه الملاحظة؟"
-pinLimitExceeded: "لا يمكنك تثبيت الملاحظات بعد الآن."
+pinLimitExceeded: "لا يمكنك تدبيس الملاحظات بعد الآن."
+intro: "لقد انتهت عملية تنصيب Misskey. الرجاء إنشاء حساب إداري."
 done: "تمّ"
 processing: "المعالجة جارية"
 preview: "معاينة"
@@ -250,6 +243,7 @@ removeAreYouSure: "متأكد من أنك تريد حذف {x}؟"
 deleteAreYouSure: "متأكد من أنك تريد حذف {x}؟"
 resetAreYouSure: "هل تريد إعادة التعيين؟"
 saved: "حُفظ"
+messaging: "المحادثة"
 upload: "ارفع"
 keepOriginalUploading: "ابق الصورة الأصلية"
 keepOriginalUploadingDescription: "يحفظ الصور المرفوعة على حالتها الأصلية، وان عطّل ستولد نسخة مخصصة من الصورة."
@@ -262,6 +256,7 @@ uploadFromUrlMayTakeTime: "سيستغرق بعض الوقت لاتمام الر
 explore: "استكشاف"
 messageRead: "مقروءة"
 noMoreHistory: "لا يوجد المزيد من التاريخ"
+startMessaging: "ابدأ محادثة"
 nUsersRead: "قرأه {n}"
 agreeTo: "اوافق على {0}"
 agree: "أقبل"
@@ -310,7 +305,7 @@ copyUrl: "انسخ الرابط"
 rename: "إعادة التسمية"
 avatar: "الصورة الرمزية"
 banner: "الصورة الرأسية"
-displayOfSensitiveMedia: "عرض المحتوى الحساس"
+nsfw: "محتوى حساس"
 whenServerDisconnected: "عند فقدان الاتصال بالخادم"
 disconnectedFromServer: "قُطِع الإتصال بالخادم"
 reload: "انعش"
@@ -340,25 +335,25 @@ enableLocalTimeline: "تفعيل الخيط المحلي"
 enableGlobalTimeline: "تفعيل الخيط الزمني الشامل"
 disablingTimelinesInfo: "سيتمكن المديرون والمشرفون من الوصول إلى كل الخيوط الزمنية حتى وإن لم تفعّل."
 registration: "إنشاء حساب"
+enableRegistration: "تفعيل إنشاء الحسابات الجديدة"
 invite: "دعوة"
 driveCapacityPerLocalAccount: "حصة التخزين لكل مستخدم محلي"
 driveCapacityPerRemoteAccount: "حصة التخزين لكل مستخدم بعيد"
 inMb: "بالميغابايت"
+iconUrl: "رابط الأيقونة"
 bannerUrl: "رابط صورة اللافتة"
 backgroundImageUrl: "رابط صورة الخلفية"
 basicInfo: "المعلومات الأساسية "
-pinnedUsers: "المستخدمون المثبتون"
+pinnedUsers: "المستخدمون المدبسون"
-pinnedUsersDescription: "قائمة المستخدمين المثبتين في لسان \"استكشف\" ، اجعل كل اسم مستخدم في سطر لوحده."
+pinnedUsersDescription: "قائمة المستخدمين المدبسين في لسان \"استكشف\" ، اجعل كل اسم مستخدم في سطر لوحده."
-pinnedPages: "الصفحات المثبتة"
+pinnedPages: "الصفحات المدبسة"
-pinnedPagesDescription: "أدخل مسار الصفحات التي تريد تثبيتها في أعلى هذا الموقع، اجعل كل مسار في سطر لوحده."
+pinnedPagesDescription: "أدخل مسار الصفحات التي تريد تدبيسها في أعلى هذا الموقع، اجعل كل مسار في سطر لوحده."
-pinnedClipId: "معرّف المشبك المثبت"
+pinnedClipId: "معرّف المشبك المدبس"
-pinnedNotes: "ملاحظة مثبتة"
+pinnedNotes: "ملاحظة مدبسة"
 hcaptcha: "hCaptcha"
 enableHcaptcha: "فعّل hCaptcha"
 hcaptchaSiteKey: "مفتاح الموقع"
 hcaptchaSecretKey: "المفتاح السري"
-mcaptchaSiteKey: "مفتاح الموقع"
-mcaptchaSecretKey: "المفتاح السري"
 recaptcha: "reCAPTCHA"
 enableRecaptcha: "تمكين reCAPTCHA"
 recaptchaSiteKey: "مفتاح الموقع"
@@ -403,7 +398,6 @@ totp: "تطبيق استيثاق"
 moderator: "مشرِف"
 moderation: "الإشراف"
 nUsersMentioned: "{n} مستخدمين أُشير إليهم"
-securityKeyAndPasskey: "الأمن ومفاتيح الأمان"
 securityKey: "مفتاح الأمان"
 lastUsed: "آخر استخدام"
 lastUsedAt: "آخر استخدام: {t}"
@@ -416,6 +410,7 @@ share: "شارِك"
 notFound: "غير موجود"
 notFoundDescription: "تعذر العثور على صفحة يقود إليها هذا الرابط."
 uploadFolder: "المجلد الافتراضي للرفع"
+cacheClear: "مسح ذاكرة التخزين المؤقت"
 markAsReadAllNotifications: "وضع جميع الإشعارات كأنها مقروءة"
 markAsReadAllUnreadNotes: "علّم جميع الملاحظات كمقروءة"
 markAsReadAllTalkMessages: "علّم جميع الرسائل كمقروءة"
@@ -433,6 +428,8 @@ retype: "أعد الكتابة"
 noteOf: "ملاحظات {user}"
 quoteAttached: "اِقتُبسَ"
 quoteQuestion: "أتريد تضمينها كاقتباس"
+noMessagesYet: "ليس هناك رسائل بعد"
+newMessageExists: "لقد تلقيت رسالة جديدة"
 onlyOneFileCanBeAttached: "يمكنك إرفاق ملف واحد بالرسالة"
 signinRequired: "رجاءً لِج"
 invitations: "دعوة"
@@ -455,7 +452,6 @@ language: "اللغة"
 uiLanguage: "لغة واجهة المستخدم"
 aboutX: "عن {x}"
 emojiStyle: "نمط الوجوه التعبيرية"
-showNoteActionsOnlyHover: "أظهر الإجراءات عند التمرير فوق الملاحظة"
 noHistory: "السجل فارغ"
 signinHistory: "تاريخ تسجيل الدخول"
 doing: "انتظر لحظة"
@@ -488,12 +484,10 @@ objectStoragePrefix: "البادئة"
 objectStoragePrefixDesc: "ستُحفظ الملفات في مجلدات تحوي اسماءها هذه البادئة."
 objectStorageEndpoint: "نقطة النهاية"
 objectStorageRegion: "المنطقة"
-objectStorageRegionDesc: "حدد منطقة مثل \"xx-east-1\". إذا كانت خدمتك لا تميز بين المناطق استخدم \"us-east-1\" أو اتركها فارغة إذا كنت تستخدم متغيرات البيئة أو ملفات ضبط AWS."
 objectStorageUseSSL: "استخدم SSL"
 objectStorageUseSSLDesc: "عطل هذا الخيار إذا لم ترد استخدام API عبر HTTPS"
 objectStorageUseProxy: "اتصل عبر وكيل"
 objectStorageUseProxyDesc: "عطل هذا الخيار إذا لم ترد استخدام API عبر وكيل"
-objectStorageSetPublicRead: "عينها ك\"علنية\" عند الرفع"
 serverLogs: "سجلات الخادم"
 deleteAll: "حذف الكل"
 showFixedPostForm: "أظهر نموذج الكتابة في أعلى الصفحة"
@@ -537,7 +531,6 @@ accountDeletedDescription: "حُذف هذا الحساب."
 menu: "القائمة"
 divider: "فاصل"
 addItem: "إضافة عنصر"
-rearrange: "أعد الترتيب"
 relays: "المُرَحلات"
 addRelay: "إضافة مُرحّل"
 inboxUrl: "رابط صندوق الوارد"
@@ -561,7 +554,6 @@ leaveConfirm: "لديك تغييرات غير محفوظة. أتريد المت
 manage: "إدارة "
 plugins: "الإضافات"
 preferencesBackups: "النُسخ الاحتياطية للإعدادات"
-useBlurEffectForModal: "استخدم تأثير الطمس في المشروط"
 useFullReactionPicker: "استخدم الحجم الكامل لمنتقي التفاعلات"
 width: "العرض"
 height: "الإرتفاع"
@@ -620,7 +612,10 @@ abuseReported: "أُرسل البلاغ، شكرًا لك"
 reporter: "المُبلّغ"
 reporteeOrigin: "أصل البلاغ"
 reporterOrigin: "أصل المُبلّغ"
+forwardReport: "وجّه البلاغ إلى المثيل البعيد"
+forwardReportIsAnonymous: "في المثيل البعيد سيظهر المبلّغ كحساب مجهول."
 send: "أرسل"
+abuseMarkAsResolved: "علّم البلاغ كمحلول"
 openInNewTab: "افتح في لسان جديد"
 defaultNavigationBehaviour: "سلوك الملاحة الافتراضي"
 editTheseSettingsMayBreakAccount: "تعديل هذه الإعدادات قد يسبب عطبًا لحسابك"
@@ -634,9 +629,7 @@ clip: "مِشبك"
 createNew: "أنشِئ جديد"
 optional: "اختياري"
 createNewClip: "أنشئ مِشبكَا جديدًا"
-confirmToUnclipAlreadyClippedNote: "هذه الملاحظة تنتمي للمشبك {name} سلفًا، أتريد حذفها منه⸮"
 public: "علني"
-private: "خاص"
 i18nInfo: "يترجم متطوعون ميسكي إلى عدة لغات، يمكنك المساعدة عبر {link}"
 manageAccessTokens: "إدارة رموز الوصول"
 accountInfo: "معلومات الحساب"
@@ -657,7 +650,6 @@ driveFilesCount: "عدد الملفات في قرص التخزين"
 driveUsage: "المستغل من قرص التخزين"
 noCrawle: "ارفض فهرسة زاحف الويب"
 noCrawleDescription: "يطلب من محركات البحث ألّا يُفهرسوا ملفك الشخصي وملاحظات وصفحاتك وما شابه."
-lockedAccountInfo: "ستكون هذه الملاحظة مرئية للجميع مالم تحدد مرئتيها إلى \"للمتابعين فقط\""
 alwaysMarkSensitive: "علّم افتراضيًا جميع ملاحظاتي كذات محتوى حساس"
 loadRawImages: "حمّل الصور الأصلية بدلًا من المصغرات"
 disableShowingAnimatedImages: "لا تشغّل الصور المتحركة"
@@ -675,8 +667,7 @@ experimental: "اختباري"
 developer: "المطور"
 makeExplorable: "أظهر الحساب في صفحة \"استكشاف\""
 makeExplorableDescription: "بتعطيل هذا الخيار لن يظهر حسابك في صفحة \"استكشاف\""
-left: "يسار"
+showGapBetweenNotesInTimeline: "أظهر فجوات بين المشاركات في الخيط الزمني"
-center: "وسط"
 wide: "عريض"
 narrow: "رفيع"
 reloadToApplySetting: "سيُطبق هذا الإعداد بعد إعادة تحميل الصفحة، أتريد إعادة تحميلها الآن؟"
@@ -714,7 +705,6 @@ editCode: "حرر الشفرة"
 apply: "تطبيق"
 receiveAnnouncementFromInstance: "استلم إشعارات من هذا المثيل"
 emailNotification: "إشعارات البريد الكتروني"
-publish: "علني"
 inChannelSearch: "ابحث عن قناة"
 useReactionPickerForContextMenu: "افتح منتقي التفاعلات عند النقر بالزر الأيمن"
 typingUsers: "{users} يكتب(ون)..."
@@ -727,7 +717,7 @@ unlikeConfirm: "أتريد إلغاء إعجابك؟"
 fullView: "ملء الشاشة"
 quitFullView: "اخرج من وضع ملء للشاشة"
 addDescription: "أضف وصفًا"
-userPagePinTip: "لعرض ملاحظة هنا اختر \"ثبتها على الصفحة الشخصية\" من قائمة تلك الملاحظة."
+userPagePinTip: "لعرض ملاحظة هنا اختر \"دبسها على الصفحة الشخصية\" من قائمة تلك الملاحظة."
 notSpecifiedMentionWarning: "في الملاحظة ذكر لمستخدمين لن يستلموها."
 info: "عن"
 userInfo: "معلومات المستخدم"
@@ -754,7 +744,6 @@ noMaintainerInformationWarning: "لم تُضبط معلومات المدير"
 noBotProtectionWarning: "لم تضبط الحماية من الحسابات الآلية"
 configure: "اضبط"
 postToGallery: "انشر في المعرض"
-postToHashtag: "انشر بهذا الوسم"
 gallery: "المعرض"
 recentPosts: "المشاركات الحديثة"
 popularPosts: "المشاركات المتداولة"
@@ -787,9 +776,7 @@ translate: "ترجم"
 translatedFrom: "تُرجم من {x}"
 accountDeletionInProgress: "حذف الحساب جارٍ"
 usernameInfo: "الاسم الذي يميزك عن بافي مستخدمي هذا الخادم، يمكنك استخدام الحروف اللاتينية (a~z, A~Z) والأرقام (0~9) والشرطة السفلية (_). لا يمكنك تغييره بعد تسجيله."
-devMode: "وضع المُطوّر"
 keepCw: "أبقِ على تحذيرات المحتوى"
-pubSub: "حسابات Pub/Sub"
 lastCommunication: "آخر تواصل"
 resolved: "عولج"
 unresolved: "لم يعالج"
@@ -797,8 +784,6 @@ breakFollow: "إلغاء الاشتراك"
 breakFollowConfirm: "أمتأكد من إزالة المتابِع ؟"
 itsOn: "مفعّل"
 itsOff: "معطّل"
-on: "مفعل"
-off: "معطل"
 emailRequiredForSignup: "عنوان البريد الإلكتروني إلزامي للتسجيل"
 unread: "غير مقروءة"
 filter: "رشّح"
@@ -809,6 +794,8 @@ makeReactionsPublicDescription: "هذا سيجعل قائمة تفاعلاتك
 classic: "تقليدي"
 muteThread: "اكتم النقاش"
 unmuteThread: "ارفع الكتم عن النقاش"
+ffVisibility: "مرئية المتابِعين/المتابَعين"
+ffVisibilityDescription: "يسمح لك بتحديد من يمكنهم رؤية متابِعيك ومتابَعيك."
 continueThread: "اعرض بقية النقاش"
 deleteAccountConfirm: "سيحذف حسابك نهائيًا، أتريد المتابعة؟"
 incorrectPassword: "كلمة السر خاطئة."
@@ -833,9 +820,6 @@ oneDay: "يوم"
 oneWeek: "أسبوع"
 oneMonth: "شهر"
 failedToFetchAccountInformation: "تعذر جلب معلومات الحساب"
-cropImage: "اقتصاص الصورة"
-cropImageAsk: "أتريد اقتصاص هذه الصورة"
-cropYes: "اقتص"
 cropNo: "استخدمها كما هي"
 file: "الملفات"
 recentNHours: "آخر {n} ساعة"
@@ -843,23 +827,19 @@ recentNDays: "آخر {n} أيام"
 noEmailServerWarning: "خادم البريد غير مضبوط."
 thereIsUnresolvedAbuseReportWarning: "توجد بلاغات غير معالجة."
 recommended: "مقترح"
-check: "التحقق"
 driveCapOverrideLabel: "غيّر حجم قرص التخزين لهذا المستخدم"
 driveCapOverrideCaption: "أعد الحجم إلى القيمة الافتراضية بإدخال 0 أو أقل."
 requireAdminForView: "لاستعراض هذه الصفحة وجب عليك الولوج كمدير."
-isSystemAccount: "حساب أنشأه النظام ويُدار من قِبله."
 typeToConfirm: "أدخل {x} للتأكيد"
 deleteAccount: "احذف الحساب"
 document: "التوثيق"
 numberOfPageCache: "عدد الصفحات المخزنة مؤقتًا"
-numberOfPageCacheDescription: "رفع الرقم سيسحن تجربة المستخدم لكن سيرفع استهلاك الذاكرة."
 logoutConfirm: "أتريد الخروج؟"
 lastActiveDate: "آخر استخدام"
 statusbar: "شريط الحالة"
 pleaseSelect: "حدد خيارًا"
 reverse: "اقلب"
 colored: "ملوّن"
-refreshInterval: "مهلة التحديث"
 label: "التسمية"
 type: "نوع"
 speed: "سرعة"
@@ -867,15 +847,11 @@ slow: "بطيء"
 fast: "سريع"
 sensitiveMediaDetection: "التعرف على المحتوى الحساس"
 localOnly: "المحلي فقط"
-remoteOnly: "بُعدي فقط"
 failedToUpload: "فشل الرفع"
 cannotUploadBecauseInappropriate: "تعذر رفع الملف لوجود محتوى حساس فيه."
 cannotUploadBecauseNoFreeSpace: "تعذر رفع الملف لنقص مساحة التخزين."
 cannotUploadBecauseExceedsFileSizeLimit: "تعذر رفع الملف بسبب تجاوز حجمه للحد المسموح"
 beta: "بيتا"
-enableAutoSensitive: "تعيين تلقائي كمحتوى حساس NSFW"
-enableAutoSensitiveDescription: "عند الاستطاعة يسمح باكتشاف المحتوى حساس NSFW تلقائيًا في الوسائط باستخدام تعلم الآلة ووسمها تبعًا لذلك. قد يكون هذا الخيار مفعلا من جهة الخادم وسيعمل حتى وان عُطل."
-activeEmailValidationDescription: "يتحقق من صحة عنوان البريد الإلكتروني بشكل أكثر حزمًا وذلك عبر تحديد ما إذا كان عنوان بريد إلكتروني مؤقت وإمكانية التواصل معه. إذا لم يحدد هذا الخيار فسيتحقق من نسق عنوان البريد الإلكتروني."
 navbar: "شريط التنقل"
 shuffle: "خلط"
 account: "الحسابات"
@@ -887,33 +863,22 @@ pushNotificationAlreadySubscribed: "إرسال الإشعارات مفعل سل
 pushNotificationNotSupported: "متصفحك لا يدعم إرسال الإشعارات أو المثيل لا يدعمها."
 sendPushNotificationReadMessage: "احذف الإشعارات فور قراءتها"
 sendPushNotificationReadMessageCaption: "هذا قد يزيد من معدل استهلاك الطاقة لجهازك."
-windowMaximize: "املأ الشاشة"
-windowRestore: "استرجاع"
 caption: "التعليق التوضيحي"
-loggedInAsBot: "والج كآلي"
 tools: "أدوات"
 cannotLoad: "تعذر التحميل"
-numberOfProfileView: "مشاهدات الملف الشخصي"
 like: "أعجبني"
 unlike: "ألغِ الإعجاب"
-numberOfLikes: "الإعجابات"
 show: "المظهر"
 neverShow: "لا تظهره مجددًا"
-remindMeLater: "ربما لاحقا"
 didYouLikeMisskey: "هل أعجبك ميسكي؟"
-pleaseDonate: "يستخدم {host} البرمجية الحرة ميسكي. نتمنى أن تتبرعوا للمشروع مما سيسمح لنا متابعة تطويره!"
 roles: "الأدوار"
 role: "الدور"
 noRole: "لم يُعثر على دور"
 normalUser: "مستخدم عادي"
 undefined: "غير معرّف"
-assign: "أسند"
-unassign: "ألغ الإسناد"
 color: "اللون"
 manageCustomEmojis: "إدارة الإيموجي المخصصة"
-youCannotCreateAnymore: "وصلت لسقف الإنشاء."
 cannotPerformTemporary: "غير متاح مؤقتاً"
-invalidParamError: "معاملات غير صالحة"
 permissionDeniedError: "رُفضة العملية"
 preset: "إعدادات مسبقة"
 selectFromPresets: "اختر من الإعدادات المسبقة"
@@ -935,27 +900,14 @@ cannotBeChangedLater: "لا يمكن تغييره لاحقًا."
 reactionAcceptance: "قبول التفاعلات"
 rolesAssignedToMe: "الأدوار المسندة إلي"
 resetPasswordConfirm: "هل تريد إعادة تعيين كلمة السر؟"
-license: "الرخصة"
-unfavoriteConfirm: "أتريد إزالتها من المفضلة؟"
-reactionsDisplaySize: "حجم التفاعلات"
-limitWidthOfReaction: "تصغير حجم التفاعلات"
 noteIdOrUrl: "معرف الملاحظة أو رابطها"
 video: "فيديو"
 videos: "فيديوهات"
-dataSaver: "موفر البيانات"
 accountMigration: "ترحيل الحساب"
 accountMoved: "نقل هذا المستخدم حسابه:"
 accountMovedShort: "رُحل هذا الحساب."
 operationForbidden: "عملية ممنوعة"
 forceShowAds: "أظهر الإعلانات التجارية دائما"
-reactionsList: "التفاعلات"
-renotesList: "إعادات النشر"
-notificationDisplay: "إشعارات"
-leftTop: "أعلى اليسار"
-rightTop: "أعلى اليمين"
-leftBottom: "أسفل اليسار"
-rightBottom: "أسفل اليمين"
-stackAxis: "اتجاه التكديس"
 vertical: "عمودي"
 horizontal: "جانبي"
 position: "الموضع"
@@ -965,135 +917,9 @@ pleaseAgreeAllToContinue: "للمتابعة وافق على الحقول أعل
 continue: "متابعة"
 preservedUsernames: "أسماء المستخدمين المحجوزة"
 preservedUsernamesDescription: "قائمة بأسماء المستخدمين المحجوزة كلٌ في سطر. لن يُقبل التسجيل بهذه الأسماء وستبقى محصورة على التسجيل اليدوي بواسطة المديرين. لن يتأثر المستخدمون الذين يملكون هذه الأسماء سلفًا."
-createNoteFromTheFile: "أنشئ ملاحظة من هذا الملف"
 archive: "الأرشيف"
-channelArchiveConfirmTitle: "أتريد أرشفت {name}؟"
-channelArchiveConfirmDescription: "لن يمكنك نشر ملاحظات في القناة المأرشفة ولن تظهر في قائمة القنوات ولا في نتائج البحث."
-thisChannelArchived: "أُرشفت هذه القناة."
-displayOfNote: "عرض الملاحظة"
-initialAccountSetting: "إعداد الملف الشخصي"
 youFollowing: "متابَع"
-preventAiLearning: "منع استخدام البيانات في تعليم الآلة"
 options: "خيارات"
-specifyUser: "مستخدم محدد"
-failedToPreviewUrl: "تتعذر المعاينة"
-update: "حدِّث"
-rolesThatCanBeUsedThisEmojiAsReaction: "الأدوار التي يُسمح لأصحابها استخدام هذا اإيموجي في اللتفاعل"
-rolesThatCanBeUsedThisEmojiAsReactionEmptyDescription: "إذا لم تحدد دورًا يمكن للجميع استخدام هذا الإيموجي في التفاعل."
-rolesThatCanBeUsedThisEmojiAsReactionPublicRoleWarn: "يجب أن تكون الأدوار علنية."
-cancelReactionConfirm: "أتريد حذف تفاعلك؟"
-changeReactionConfirm: "أتريد تعديل تفاعلك؟"
-later: "لاحقاً"
-goToMisskey: "لميسكي"
-additionalEmojiDictionary: "قواميس إيموجي إضافية"
-installed: "مُثبت"
-enableServerMachineStats: "نشر إحصائيات عتاد الخادم"
-turnOffToImprovePerformance: "تفعيله قد يزيد الأداء."
-createInviteCode: "ولِّد دعوة"
-inviteCodeCreated: "ولِّدت دعوة"
-inviteLimitExceeded: "وصلتَ لحد عدد الدعوات المسموح لك توليدها."
-createLimitRemaining: "حد عدد الدعوات: {limit} دعوة"
-expirationDate: "تاريخ انتهاء الصلاحية"
-noExpirationDate: "لا نهاية لصلاحيتها"
-inviteCodeUsedAt: "اُستخدم رمز الدعوة في"
-registeredUserUsingInviteCode: "اِستخدم رمز الدعوة"
-unused: "غير مستعمَل"
-expired: "منتهية صلاحيته"
-icon: "الصورة الرمزية"
-replies: "رد"
-renotes: "أعد النشر"
-sourceCode: "الشفرة المصدرية"
-flip: "اقلب"
-lastNDays: "آخر {n} أيام"
-surrender: "ألغِ"
-postForm: "أنشئ ملاحظة"
-information: "عن"
-_chat:
-  invitations: "دعوة"
-  noHistory: "السجل فارغ"
-  members: "الأعضاء"
-  home: "الرئيسي"
-  send: "أرسل"
-_delivery:
-  stop: "مُعلّق"
-_initialAccountSetting:
-  accountCreated: "نجح إنشاء حسابك!"
-  letsStartAccountSetup: "إذا كنت جديدًا لنعدّ حسابك الشخصي."
-  letsFillYourProfile: "أولًا لنعد ملفك الشخصي."
-  profileSetting: "إعدادات الملف الشخصي"
-  privacySetting: "إعدادات الخصوصية"
-  theseSettingsCanEditLater: "يمكنك تغيير هذه الإعدادات لاحقًا."
-  skipAreYouSure: "أتريد تخطي إعداد الملف الشخصي؟"
-  laterAreYouSure: "أتريد إعداد الملف الشخصي لاحقًا؟"
-_serverRules:
-  description: "مجموعة من القواعد لعرضها عند التسجيل، من المستحسن كتابة ملخصٍ للشروط الخدمة."
-_accountMigration:
-  moveFrom: "انقل حسابًا آخر لهذا الحساب"
-  moveFromLabel: "الحساب الأصلي #{n}"
-  moveTo: "انقل هذا الحساب لحساب آخر"
-  moveToLabel: "الحساب الوجهة:"
-  moveCannotBeUndone: "لا يمكن التراجع عن نقل الحساب."
-  movedTo: "الحساب الوجهة:"
-_achievements:
-  _types:
-    _notes1:
-      description: "انشر ملاحظتك الأولى"
-      flavor: "تمتع باستخدام ميسكي!"
-    _notes10:
-      title: "بعض الملاحظات"
-      description: "انشر 10 ملاحظات"
-    _notes100:
-      title: "كثير من الملاحظات"
-      description: "انشر 100 ملاحظة"
-    _notes500:
-      description: "انشر 500 ملاحظة"
-    _notes1000:
-      title: "جبل ملاحظات"
-      description: "انشر 1000 ملاحظة"
-    _notes5000:
-      description: "انشر 5000 ملاحظة"
-    _notes10000:
-      description: "انشر 10000 ملاحظة"
-    _notes20000:
-      title: "أريد...ملاحظات...أكثر"
-      description: "انشر 20000 ملاحظة"
-    _notes30000:
-      title: "ملاحظات وملاحظات وملاحظات"
-      description: "انشر 30000 ملاحظة"
-    _notes40000:
-      title: "مصنع ملاحظات"
-      description: "انشر 40000 ملاحظة"
-    _notes50000:
-      title: "كوكب ملاحظات"
-      description: "انشر 50000 ملاحظة"
-    _notes60000:
-      title: "نجم ملاحظات"
-      description: "انشر 60000 ملاحظة"
-    _notes70000:
-      title: "ثقب أسود للملاحظات"
-      description: "انشر 70000 ملاحظة"
-    _notes80000:
-      title: "مجرة ملاحظات"
-      description: "انشر 80000 ملاحظة"
-    _notes90000:
-      title: "كوْن ملاحظات"
-      description: "انشر 90000 ملاحظة"
-    _notes100000:
-      title: "كل ملاحظاتك لنا"
-      description: "انشر 100000 ملاحظة"
-      flavor: "حقًا لديك الكثير من القصص"
-    _login3:
-      title: "مبتدأ I"
-    _noteFavorited1:
-      description: "فضًِل ملاحظتك الأولى"
-    _myNoteFavorited1:
-      title: "ساعٍ للنجوم"
-      description: "أعجب شخص آخر بإحدى ملاحظاتك"
-    _profileFilled:
-      title: "مستعد"
-      description: "أعدّ حسابك"
-    _markedAsCat:
-      title: "أنا قط"
 _role:
   new: "دور جديد"
   edit: "حرر الأدوار"
@@ -1101,7 +927,6 @@ _role:
   description: "وصف الدور"
   permission: "أذونات الدور"
   assignTarget: "نوع الإسناد"
-  condition: "الشرط"
   options: "خيارات"
   policies: "السياسة العامة"
   priority: "الأولوية"
@@ -1111,7 +936,6 @@ _role:
     high: "عالية"
   _options:
     canManageCustomEmojis: "إدارة الإيموجي المخصصة"
-    pinMax: "حد عدد الملاحظات المثبتة"
   _condition:
     isLocal: "مستخدم محلي"
     isRemote: "مستخدم بعيد"
@@ -1157,10 +981,6 @@ _plugin:
   install: "ثبّت إضافات"
   installWarn: "رجاءً لا تثبت إضافات غير موثوقة."
   manage: "إدارة الإضافات"
-  viewSource: "اظهر المصدر"
-_preferencesBackups:
-  createdAt: "تم إنشاؤه: {date} {time}"
-  updatedAt: "آخر تحديث: {date} {time}"
 _registry:
   scope: "الحيّز"
   key: "مفتاح"
@@ -1176,6 +996,10 @@ _aboutMisskey:
   donate: "تبرع لميسكي"
   morePatrons: "نحن نقدر الدعم الذي قدمه العديد من الأشخاص الذين لم نذكرهم. شكرًا لكم 🥰"
   patrons: "الداعمون"
+_nsfw:
+  respect: "اخف الوسائط ذات المحتوى الحساس"
+  ignore: "اعرض الوسائط ذات المحتوى الحساس"
+  force: "اخف كل الوسائط"
 _instanceTicker:
   none: "لا تظهره بتاتًا"
   remote: "أظهر للمستخدمين البِعاد"
@@ -1201,6 +1025,11 @@ _wordMute:
   muteWords: "الكلمات المحظورة"
   muteWordsDescription: "افصل بينهم بمسافة لاستخدام معامل \"و\" أو بسطر لاستخدام معامل \"أو\"."
   muteWordsDescription2: "احصر الكلمات المفتاحية بين بين شرطتين مائلتين لاستخدامها كتعابير نمطية"
+  softDescription: "اخف الملاحظات التي تستوف الشروط من الخيط الزمني."
+  hardDescription: "اخف الملاحظات التي تستوف الشروط من الخيط الزمني.بالإضافة إلى أن هذه الملاحظات ستبقى مخفية حتى وإن تغيرت الشروط."
+  soft: "لينة"
+  hard: "قاسية"
+  mutedNotes: "الملاحظات المكتومة"
 _instanceMute:
   instanceMuteDescription: "هذه سيحجب كل ملاحظات الخوادم المحجوبة ومشاركاتها والردود على تلك الملاحظات حتى وإن كانت من خادم غير محجوب."
   instanceMuteDescription2: "مدخلة لكل سطر"
@@ -1238,6 +1067,7 @@ _theme:
     shadow: "الظل"
     navBg: "خلفية الشريط الجانبي"
     navFg: "نص الشريط الجانبي"
+    navHoverFg: "نص الشريط الجانبي (عند التمرير فوقه)"
     link: "رابط"
     hashtag: "وسم"
     mention: "أشر الى"
@@ -1252,11 +1082,17 @@ _theme:
     buttonBg: "خلفية الأزرار"
     buttonHoverBg: "خلفية الأزرار (عند التمرير فوقها)"
     inputBorder: "حواف حقل الإدخال"
+    listItemHoverBg: "خلفية عناصر القائمة (عند التمرير فوقها)"
+    driveFolderBg: "خلفية مجلد قرص التخزين"
     messageBg: "خلفية المحادثة"
 _sfx:
   note: "الملاحظات"
   noteMy: "ملاحظتي"
   notification: "الإشعارات"
+  chat: "المحادثة"
+  chatBg: "المحادثة (الخلفية)"
+  antenna: "الهوائيات"
+  channel: "إشعارات القنات"
 _ago:
   future: "المستقبَل"
   justNow: "اللحظة"
@@ -1311,7 +1147,6 @@ _permissions:
   "read:gallery": "اعرض المعرض"
   "write:gallery": "عدّل المعرض"
   "read:gallery-likes": "يعرض ما أعجبك من مشاركات المعرض"
-  "write:chat": "اكتب أو احذف رسائل محادثة"
 _auth:
   shareAccess: "أتريد التفويض لـ \"{name}\" بالوصول لحسابك؟"
   shareAccessAsk: "هل تخول لهذا التطبيق الوصول لحسابك؟"
@@ -1416,7 +1251,6 @@ _profile:
 _exportOrImport:
   allNotes: "كل الملاحظات"
   favoritedNotes: " الملاحظات المفضلة"
-  clips: "مِشبك"
   followingList: "المتابَعون"
   muteList: "المستخدمون المكتومون"
   blockingList: "المستخدمون المحجوبون"
@@ -1461,6 +1295,9 @@ _pages:
   newPage: "أنشئ صفحة جديدة"
   editPage: "عدّل الصفحة"
   readPage: "نُشّط عرض المصدر"
+  created: "نجح إنشاء الصفحة"
+  updated: "نجح تعديل الصفحة"
+  deleted: "نجح حذف الصفحة"
   pageSetting: "إعدادات الصفحة"
   nameAlreadyExists: "رابط الصفحة موجود مسبقًا"
   invalidNameTitle: "رابط الصفحة ليس صالحًا"
@@ -1479,7 +1316,7 @@ _pages:
   url: "رابط الصفحة"
   summary: "ملخص الصفحة"
   alignCenter: "توسيط العناصر"
-  hideTitleWhenPinned: "اخف عنوان الصفحة عند تثبيتها في ملف الشخصي"
+  hideTitleWhenPinned: "اخف عنوان الصفحة عند تدبيسها في ملف الشخصي"
   font: "الخط"
   fontSerif: "Serif"
   fontSansSerif: "Sans Serif"
@@ -1509,83 +1346,49 @@ _notification:
   fileUploaded: "نجح رفع الملف"
   youGotMention: "{name} أشار إليك"
   youGotReply: "ردّ عليك {name}"
-  youGotQuote: "اقتبس {name} منشورك"
+  youGotQuote: "اقتبس منك {name}"
-  youRenoted: "أعاد {name} نشر منشورك"
+  youRenoted: "إعادت نشر من {name}"
   youWereFollowed: "يتابعك"
   youReceivedFollowRequest: "تلقيتَ طلب متابعة"
   yourFollowRequestAccepted: "قُبل طلب المتابعة"
-  pollEnded: "انتهى الاستطلاع"
+  pollEnded: "ظهرت نتائج الاستطلاع"
   unreadAntennaNote: "هوائي {name}"
   _types:
     all: "الكل"
     follow: "متابِعون جدد"
     mention: "الإشارات"
     reply: "الردود"
-    renote: "أعاد النشر"
+    renote: "أعد النشر"
     quote: "الاقتباسات"
-    reaction: "التفاعل"
+    reaction: "التفاعلات"
-    receiveFollowRequest: "طلبات المتابعة"
+    receiveFollowRequest: "طلبات المتابعة المتلقاة"
     followRequestAccepted: "طلبات المتابعة المقبولة"
-    login: "لِج"
     app: "إشعارات التطبيقات المرتبطة"
   _actions:
     followBack: "تابعك بالمثل"
     reply: "رد"
     renote: "أعد النشر"
 _deck:
-  alwaysShowMainColumn: "أظهر العمود الأساسي دائمًا"
+  alwaysShowMainColumn: "أظهر العمود الرئيسي دائمًا"
-  columnAlign: "محاذاة الأعمدة"
+  columnAlign: "حاذِ الأعمدة"
-  addColumn: "إضافة عمود"
+  addColumn: "أضف عمودًا"
-  swapLeft: "التحريك إلى اليسار"
+  swapLeft: "حرّك لليسار"
-  swapRight: "التحريك إلى اليمين"
+  swapRight: "حرّك لليمين"
-  swapUp: "التحريك إلى الأعلى"
+  swapUp: "حرّك لأعلى"
-  swapDown: "التحريك إلى الأسفل"
+  swapDown: "حرّك لأسفل"
-  profile: "حسابي الشخصي"
+  profile: "الملف الشخصي"
-  newProfile: "ملف تعريفي جديد"
-  deleteProfile: "حذف الملف التعريفي"
   _columns:
-    main: "الرئيسية"
+    main: "الرئيسي"
-    widgets: "التطبيقات المُصغّرة"
+    widgets: "الودجات"
     notifications: "الإشعارات"
-    tl: "الخط الزمني"
+    tl: "الخيط الزمني"
     antenna: "الهوائيات"
     list: "القوائم"
     channel: "القنوات"
     mentions: "الإشارات"
     direct: "مباشرة"
 _webhookSettings:
-  name: "الاسم"
+  name: "الإسم"
-  active: "مُفعّل"
+  active: "مفعّل"
   _events:
-    reaction: "عند التفاعل"
+    reaction: "عند تلقي تفاعل"
-_abuseReport:
-  _notificationRecipient:
-    _recipientType:
-      mail: "البريد الإلكتروني "
-_moderationLogTypes:
-  suspend: "علِق"
-  deleteDriveFile: "حُذف الملف"
-  deleteNote: "حُذفت الملاحظة"
-  createGlobalAnnouncement: "أُنشئ إعلان عام"
-  createUserAnnouncement: "أُنشئ إعلان مستخدم"
-  updateGlobalAnnouncement: "حُدث إعلان عام"
-  updateUserAnnouncement: "حُدث إعلان مستخدم"
-  resetPassword: "أعد تعيين كلمتك السرية"
-  createInvitation: "ولِّد دعوة"
-_reversi:
-  total: "المجموع"
-  lookingForPlayer: "يبحث عن خصم..."
-  gameCanceled: "أُلغيت اللعبة."
-  opponentHasSettingsChanged: "غيَر الخصم إعدادته."
-  showBoardLabels: "اعرض ترقيم الصفوف والأعمدة على اللوح"
-  useAvatarAsStone: "حوَل الحجارة إلى صور مستخدمين"
-_offlineScreen:
-  title: "غير متصل - يتعذر الاتصال بالخادم"
-  header: "يتعذر الاتصال بالخادم"
-_remoteLookupErrors:
-  _noSuchObject:
-    title: "غير موجود"
-_search:
-  searchScopeAll: "الكل"
-  searchScopeLocal: "المحلي"
-  searchScopeUser: "مستخدم محدد"

locales/bn-BD.yml

@@ -2,7 +2,6 @@
 _lang_: "বাংলা"
 headlineMisskey: "নোট ব্যাবহার করে সংযুক্ত নেটওয়ার্ক"
 introMisskey: "স্বাগতম! মিসকি একটি ওপেন সোর্স, ডিসেন্ট্রালাইজড মাইক্রোব্লগিং পরিষেবা। \n\"নোট\" তৈরির মাধ্যমে যা ঘটছে তা সবার সাথে শেয়ার করুন 📡\n\"রিঅ্যাকশন\" গুলির মাধ্যমে যেকোনো নোট সম্পর্কে আপনার অনুভূতি ব্যাক্ত করতে পারেন 👍\nএকটি নতুন দুনিয়া ঘুরে দেখুন 🚀\n"
-poweredByMisskeyDescription: "{name} হল ওপেন সোর্স প্ল্যাটফর্ম <b>Misskey</b>-এর সার্ভারগুলির একটি৷"
 monthAndDay: "{day}/{month}"
 search: "খুঁজুন"
 notifications: "বিজ্ঞপ্তি"
@@ -13,14 +12,12 @@ fetchingAsApObject: "ফেডিভার্স থেকে খবর আন
 ok: "ঠিক"
 gotIt: "বুঝেছি"
 cancel: "বাতিল"
-noThankYou: "না, ধন্যবাদ"
 enterUsername: "ইউজারনেম লিখুন"
 renotedBy: "{user} রিনোট করেছেন"
 noNotes: "কোন নোট নেই"
 noNotifications: "কোনো বিজ্ঞপ্তি নেই"
 instance: "ইন্সট্যান্স"
 settings: "সেটিংস"
-notificationSettings: "বিজ্ঞপ্তির সেটিংস"
 basicSettings: "সাধারণ সেটিংস"
 otherSettings: "অন্যান্য সেটিংস"
 openInWindow: "নতুন উইন্ডোতে খুলা"
@@ -45,20 +42,12 @@ pin: "পিন করা"
 unpin: "পিন সরান"
 copyContent: "বিষয়বস্তু কপি করুন"
 copyLink: "লিঙ্ক কপি করুন"
-copyLinkRenote: "রিনোট লিঙ্ক কপি করুন"
 delete: "মুছুন"
 deleteAndEdit: "মুছুন এবং সম্পাদনা করুন"
 deleteAndEditConfirm: "আপনি কি এই নোটটি মুছে এটি সম্পাদনা করার বিষয়ে নিশ্চিত? আপনি এটির সমস্ত রিঅ্যাকশন, রিনোট এবং জবাব হারাবেন।"
 addToList: "লিস্ট এ যোগ করুন"
-addToAntenna: "অ্যান্টেনা এ যোগ করুন"
 sendMessage: "একটি বার্তা পাঠান"
-copyRSS: "RSS কপি করুন"
 copyUsername: "ব্যবহারকারীর নাম কপি করুন"
-copyUserId: "ব্যবহারকারীর ID কপি করুন"
-copyNoteId: "নোটের ID কপি করুন"
-copyFileId: "ফাইল ID কপি করুন"
-copyFolderId: "ফোল্ডার ID কপি করুন"
-copyProfileUrl: "প্রোফাইল URL কপি করুন"
 searchUser: "ব্যবহারকারী খুঁজুন..."
 reply: "জবাব"
 loadMore: "আরও দেখুন"
@@ -111,8 +100,6 @@ renoted: "রিনোট করা হয়েছে"
 cantRenote: "এই নোটটি রিনোট করা যাবে না।"
 cantReRenote: "রিনোটকে রিনোট করা যাবে না।"
 quote: "উদ্ধৃতি"
-inChannelRenote: "চ্যানেলে রিনোট"
-inChannelQuote: "চ্যানেলে উদ্ধৃতি"
 pinnedNote: "পিন করা নোট"
 pinned: "পিন করা"
 you: "আপনি"
@@ -121,10 +108,7 @@ sensitive: "সংবেদনশীল বিষয়বস্তু"
 add: "যুক্ত করুন"
 reaction: "প্রতিক্রিয়া"
 reactions: "প্রতিক্রিয়া"
-emojiPicker: "ইমোজি পিকার"
+reactionSetting: "রিঅ্যাকশন পিকারে যেসকল প্রতিক্রিয়া দেখানো হবে"
-pinnedEmojisForReactionSettingDescription: "রিঅ্যাকশন দেয়ার সময় আপনি ইমোজিটিকে পিন করা এবং প্রদর্শিত হওয়ার জন্য সেট করতে পারেন।"
-pinnedEmojisSettingDescription: "ইমোজি ইনপুট দেয়ার সময় আপনি ইমোজিটিকে পিন করা এবং প্রদর্শিত হওয়ার জন্য সেট করতে পারেন।"
-emojiPickerDisplay: "পিকার ডিসপ্লে"
 reactionSettingDescription2: "পুনরায় সাজাতে টেনে আনুন, মুছতে ক্লিক করুন, যোগ করতে + টিপুন।"
 rememberNoteVisibility: "নোটের দৃশ্যমান্যতার সেটিংস মনে রাখুন"
 attachCancel: "অ্যাটাচমেন্ট সরান "
@@ -215,6 +199,7 @@ noUsers: "কোন ব্যাবহারকারী নেই"
 editProfile: "প্রোফাইল সম্পাদনা করুন"
 noteDeleteConfirm: "আপনি কি নোট ডিলিট করার ব্যাপারে নিশ্চিত?"
 pinLimitExceeded: "আপনি আর কোন নোট পিন করতে পারবেন না"
+intro: "Misskey এর ইন্সটলেশন সম্পন্ন হয়েছে！দয়া করে অ্যাডমিন ইউজার তৈরি করুন।"
 done: "সম্পন্ন"
 processing: "প্রক্রিয়াধীন..."
 preview: "পূর্বরূপ দেখুন"
@@ -251,6 +236,7 @@ removeAreYouSure: "আপনি কি \"{x}\" সরানোর ব্যা
 deleteAreYouSure: "আপনি কি \"{x}\" সরানোর ব্যাপারে নিশ্চিত?"
 resetAreYouSure: "রিসেট করার ব্যাপারে নিশ্চিত?"
 saved: "সংরক্ষিত হয়েছে"
+messaging: "চ্যাট"
 upload: "আপলোড"
 keepOriginalUploading: "আসল ছবি রাখুন"
 keepOriginalUploadingDescription: "ছবিটি আপলোড করার সময় আসল সংস্করণটি রাখুন। অপশনটি বন্ধ থাকলে, আপলোডের সময় ওয়েব প্রকাশনার জন্য ছবি ব্রাউজারে তৈরি করা হবে।"
@@ -263,6 +249,7 @@ uploadFromUrlMayTakeTime: "URL হতে আপলোড হতে কিছু
 explore: "ঘুরে দেখুন"
 messageRead: "পড়া"
 noMoreHistory: "আর কোন ইতিহাস নেই"
+startMessaging: "চ্যাট শুরু করুন"
 nUsersRead: "{n} জন পড়েছেন"
 agreeTo: "{0} এর প্রতি আমি সম্মত"
 start: "শুরু করুন"
@@ -307,6 +294,7 @@ copyUrl: "URL কপি করুন"
 rename: "পুনঃনামকরণ"
 avatar: "প্রোফাইল ছবি"
 banner: "ব্যানার"
+nsfw: "সংবেদনশীল বিষয়বস্তু"
 whenServerDisconnected: "সার্ভারের সাথে সংযোগ বিচ্ছিন্ন হয়ে গেলে"
 disconnectedFromServer: "সার্ভার থেকে সংযোগ বিচ্ছিন্ন হয়েছে"
 reload: "আবার লোড করুন"
@@ -336,10 +324,12 @@ enableLocalTimeline: "স্থানীয় টাইমলাইন চাল
 enableGlobalTimeline: "গ্লোবাল টাইমলাইন চালু করুন"
 disablingTimelinesInfo: "আপনি এই টাইমলাইনগুলি বন্ধ করলেও প্রশাসক এবং মডারেটররা এই টাইমলাইনগুলি ব্যাবহার করতে পারবে"
 registration: "নিবন্ধন"
+enableRegistration: "নতুন ব্যাবহারকারী নিবন্ধন চালু করুন"
 invite: "আমন্ত্রণ"
 driveCapacityPerLocalAccount: "প্রত্যেক স্থানীয় ব্যাবহারকারীর জন্য ড্রাইভের জায়গা"
 driveCapacityPerRemoteAccount: "প্রত্যেক রিমোট ব্যাবহারকারীর জন্য ড্রাইভের জায়গা"
 inMb: "মেগাবাইটে লিখুন"
+iconUrl: "আইকনের URL (ফ্যাভিকন, ইত্যাদি)"
 bannerUrl: "ব্যানার ছবির URL"
 backgroundImageUrl: "পটভূমির চিত্রের URL"
 basicInfo: "আপনার ব্যক্তিগত তথ্য"
@@ -353,8 +343,6 @@ hcaptcha: "hCaptcha"
 enableHcaptcha: "hCaptcha চালু করুন"
 hcaptchaSiteKey: "সাইট কী"
 hcaptchaSecretKey: "সিক্রেট কী"
-mcaptchaSiteKey: "সাইট কী"
-mcaptchaSecretKey: "সিক্রেট কী"
 recaptcha: "reCAPTCHA"
 enableRecaptcha: "reCAPTCHA চালু করুন"
 recaptchaSiteKey: "সাইট কী"
@@ -407,6 +395,7 @@ share: "শেয়ার"
 notFound: "পাওয়া যায়নি"
 notFoundDescription: "এই URL-এর সাথে সম্পর্কিত কোনো পৃষ্ঠা নেই।"
 uploadFolder: "আপলোডের জন্য ডিফল্ট ফোল্ডার"
+cacheClear: "ক্যাশ পরিষ্কার করুন"
 markAsReadAllNotifications: "সমস্ত বিজ্ঞপ্তিগুলি পঠিত হিসাবে চিহ্নিত করুন"
 markAsReadAllUnreadNotes: "সমস্ত নোটগুলি পঠিত হিসাবে চিহ্নিত করুন"
 markAsReadAllTalkMessages: "সমস্ত মেসেজ পঠিত হিসাবে চিহ্নিত করুন"
@@ -424,6 +413,8 @@ retype: "পুনঃ প্রবেশ"
 noteOf: "{user} এর নোট"
 quoteAttached: "উদ্ধৃত"
 quoteQuestion: "উদ্ধৃতি হিসাবে সংযুক্ত করবেন?"
+noMessagesYet: "কোন মেসেজ নেই"
+newMessageExists: "নতুন মেসেজ পেয়েছেন"
 onlyOneFileCanBeAttached: "আপনি মেসেজের সাথে সর্বোচ্চ একটি ফাইল যুক্ত করতে পারবেন"
 signinRequired: "দয়া করে লগ ইন করুন"
 invitations: "আমন্ত্রণ"
@@ -445,6 +436,7 @@ or: "অথবা"
 language: "ভাষা"
 uiLanguage: "UI এর ভাষা"
 aboutX: "{x} সম্পর্কে"
+disableDrawer: "ড্রয়ার মেনু প্রদর্শন করবেন না"
 noHistory: "কোনো ইতিহাস নেই"
 signinHistory: "প্রবেশ করার ইতিহাস"
 doing: "প্রক্রিয়া করছে..."
@@ -618,7 +610,10 @@ abuseReported: "আপনার অভিযোগটি দাখিল কর
 reporter: "অভিযোগকারী"
 reporteeOrigin: "অভিযোগটির উৎস"
 reporterOrigin: "অভিযোগকারীর উৎস"
+forwardReport: "রিমোট ইন্সত্যান্সে অভিযোগটি পাঠান"
+forwardReportIsAnonymous: "আপনার তথ্য রিমোট ইন্সত্যান্সে পাঠানো হবে না এবং একটি বেনামী সিস্টেম অ্যাকাউন্ট হিসাবে প্রদর্শিত হবে।"
 send: "পাঠান"
+abuseMarkAsResolved: "অভিযোগটিকে সমাধাকৃত হিসাবে চিহ্নিত করুন"
 openInNewTab: "নতুন ট্যাবে খুলুন"
 openInSideView: "সাইড ভিউতে খুলুন"
 defaultNavigationBehaviour: "ডিফল্ট নেভিগেশন"
@@ -634,7 +629,6 @@ createNew: "নতুন"
 optional: "প্রয়োজনীয় নয়"
 createNewClip: "নতুন ক্লিপ তৈরি করুন"
 public: "সর্বজনীন"
-private: "ব্যাক্তিগত"
 i18nInfo: "Misskey স্বেচ্ছাসেবকদের দ্বারা বিভিন্ন ভাষায় অনুবাদ করা হচ্ছে। আপনি {link} এ গিয়ে অনুবাদে সহযোগিতা করতে পারেন।"
 manageAccessTokens: "অ্যাক্সেস টোকেন পরিচালনা করুন"
 accountInfo: "অ্যাকাউন্টের তথ্য"
@@ -672,6 +666,7 @@ experimentalFeatures: "পরীক্ষামূলক বৈশিষ্ট
 developer: "ডেভেলপার"
 makeExplorable: "অ্যাকাউন্ট \"ঘুরে দেখুন\" পৃষ্ঠায় দেখান"
 makeExplorableDescription: "আপনি এটি বন্ধ করলে, আপনার অ্যাকাউন্ট \"ঘুরে দেখুন\" পৃষ্ঠায় প্রদর্শিত হবে না।"
+showGapBetweenNotesInTimeline: "টাইমলাইন এবং নোটের মাঝে ফাকা জায়গা রাখুন"
 duplicate: "প্রতিরূপ"
 left: "বাম"
 center: "মাঝখান"
@@ -801,6 +796,8 @@ makeReactionsPublicDescription: "আপনার পূর্ববর্তী
 classic: "ক্লাসিক"
 muteThread: "থ্রেড মিউট করুন"
 unmuteThread: "থ্রেড আনমিউট করুন"
+ffVisibility: "অনুসরণ/অনুসরণকারীদের দৃশ্যমান্যতা"
+ffVisibilityDescription: "আপনি কাকে অনুসরণ করেন এবং কে আপনাকে অনুসরণ করে, সেটা কারা দেখতে পাবে তা নির্ধারণ করে।"
 continueThread: "আরো থ্রেড দেখুন"
 deleteAccountConfirm: "আপনার অ্যাকাউন্ট মুছে ফেলা হবে। ঠিক আছে?"
 incorrectPassword: "আপনার দেওয়া পাসওয়ার্ডটি ভুল।"
@@ -841,23 +838,6 @@ show: "প্রদর্শন"
 color: "রং"
 horizontal: "পাশে"
 youFollowing: "অনুসরণ করা হচ্ছে"
-icon: "প্রোফাইল ছবি"
-replies: "জবাব"
-renotes: "রিনোট"
-sourceCode: "সোর্স কোড"
-flip: "উল্টান"
-postForm: "নোট লিখুন"
-information: "আপনার সম্পর্কে"
-_chat:
-  invitations: "আমন্ত্রণ"
-  noHistory: "কোনো ইতিহাস নেই"
-  members: "সদস্যবৃন্দ"
-  home: "মূল পাতা"
-  send: "পাঠান"
-_delivery:
-  stop: "স্থগিত করা হয়েছে"
-  _type:
-    none: "প্রকাশ করা হচ্ছে"
 _role:
   priority: "অগ্রাধিকার"
   _priority:
@@ -907,7 +887,6 @@ _plugin:
   install: "প্লাগইন ইন্সটল করুন"
   installWarn: "অবিশ্বস্ত প্লাগইন ইনস্টল করবেন না।"
   manage: "প্লাগইন ম্যানেজ করুন"
-  viewSource: "উৎস দেখুন"
 _registry:
   scope: "স্কোপ"
   key: "কী"
@@ -923,6 +902,10 @@ _aboutMisskey:
   donate: "Misskey তে দান করুন"
   morePatrons: "আরও অনেকে আমাদের সাহায্য করছেন। তাদের সবাইকে ধন্যবাদ 🥰"
   patrons: "সমর্থনকারী"
+_nsfw:
+  respect: "স্পর্শকাতর মিডিয়া লুকান"
+  ignore: "স্পর্শকাতর মিডিয়া লুকাবেন না"
+  force: "সকল মিডিয়া লুকান"
 _instanceTicker:
   none: "দেখাবেন না"
   remote: "রিমোট ব্যাবহারকারীদের জন্য দেখান"
@@ -950,6 +933,11 @@ _wordMute:
   muteWords: "নিঃশব্দ করা শব্দগুলি"
   muteWordsDescription: "স্পেস দিয়ে আলাদা করলে AND শর্ত তৈরি হবে এবং আলাদা লাইনে লিখলে OR শর্ত তৈরি হবে।"
   muteWordsDescription2: "রেগুলার এক্সপ্রেশন ব্যবহার করতে স্ল্যাশ দিয়ে কীওয়ার্ডকে ঘিরে রাখুন।"
+  softDescription: "টাইমলাইন থেকে নির্দিষ্ট শর্তানুযায়ী নোট লুকিয়ে রাখে।"
+  hardDescription: "নির্দিষ্ট শর্তানুযায়ী নোটগুলিকে টাইমলাইন থেকে বাদ দেয়। আপনি শর্ত পরিবর্তন করলেও যে নোটগুলি যোগ করা হয়নি সেগুলি বাদ দেওয়া হবে।"
+  soft: "নমনীয়"
+  hard: "কঠোর"
+  mutedNotes: "মিউট করা নোটগুলি"
 _instanceMute:
   instanceMuteDescription: "কনফিগার করা ইন্সট্যান্সের সব নোট এবং রিনোট মিউট করুন, মিউট করা ইন্সট্যান্সের ব্যবহারকারীদের উত্তর সহ।"
   instanceMuteDescription2: "প্রতিটিকে আলাদা লাইনে লিখুন"
@@ -996,6 +984,7 @@ _theme:
     header: "হেডার"
     navBg: "সাইডবারের পটভূমি"
     navFg: "সাইডবারের পাঠ্য"
+    navHoverFg: "সাইডবারের পাঠ্য (হভার)"
     navActive: "সাইডবারের পাঠ্য (অ্যাকটিভ)"
     navIndicator: "সাইডবারের ইনডিকেটর"
     link: "লিংক"
@@ -1012,18 +1001,30 @@ _theme:
     infoFg: "তথ্যের পাঠ্য"
     infoWarnBg: "ওয়ার্নিং এর পটভূমি"
     infoWarnFg: "ওয়ার্নিং এর পাঠ্য"
+    cwBg: "CW বাটনের পটভূমি"
+    cwFg: "CW বাটনের পাঠ্য"
+    cwHoverBg: "CW বাটনের পটভূমি (হভার)"
     toastBg: "বিজ্ঞপ্তির পটভূমি"
     toastFg: "বিজ্ঞপ্তির পাঠ্য"
     buttonBg: "বাটনের পটভূমি"
     buttonHoverBg: "বাটনের পটভূমি (হভার)"
     inputBorder: "ইনপুট ফিল্ডের বর্ডার"
+    listItemHoverBg: "লিস্ট আইটেমের পটভূমি (হোভার)"
+    driveFolderBg: "ড্রাইভ ফোল্ডারের পটভূমি"
+    wallpaperOverlay: "ওয়ালপেপার ওভারলে"
     badge: "ব্যাজ"
     messageBg: "চ্যাটের পটভূমি"
+    accentDarken: "অ্যাকসেন্ট (গাঢ়)"
+    accentLighten: "অ্যাকসেন্ট (হাল্কা)"
     fgHighlighted: "হাইলাইট করা পাঠ্য"
 _sfx:
   note: "নোটগুলি"
   noteMy: "নোট (আপনার)"
   notification: "বিজ্ঞপ্তি"
+  chat: "চ্যাট"
+  chatBg: "চ্যাট (ব্যাকগ্রাউন্ড)"
+  antenna: "অ্যান্টেনাগুলি"
+  channel: "চ্যানেলের বিজ্ঞপ্তি"
 _ago:
   future: "ভবিষ্যৎ"
   justNow: "এইমাত্র"
@@ -1044,10 +1045,10 @@ _2fa:
   alreadyRegistered: "আপনি ইতিমধ্যে একটি 2-ফ্যাক্টর অথেনটিকেশন ডিভাইস নিবন্ধন করেছেন৷"
   step1: "প্রথমে, আপনার ডিভাইসে {a} বা {b} এর মতো একটি অথেনটিকেশন অ্যাপ ইনস্টল করুন৷"
   step2: "এরপরে, অ্যাপের সাহায্যে প্রদর্শিত QR কোডটি স্ক্যান করুন।"
+  step2Url: "ডেস্কটপ অ্যাপে, নিম্নলিখিত URL লিখুন:"
   step3: "অ্যাপে প্রদর্শিত টোকেনটি লিখুন এবং আপনার কাজ শেষ।"
   step4: "আপনাকে এখন থেকে লগ ইন করার সময়, এইভাবে টোকেন লিখতে হবে।"
   securityKeyInfo: "আপনি একটি হার্ডওয়্যার সিকিউরিটি কী ব্যবহার করে লগ ইন করতে পারেন যা FIDO2 বা ডিভাইসের ফিঙ্গারপ্রিন্ট সেন্সর বা পিন সমর্থন করে৷"
-  renewTOTPCancel: "না, ধন্যবাদ"
 _permissions:
   "read:account": "অ্যাকাউন্টের তথ্য দেখুন"
   "write:account": "অ্যাকাউন্টের তথ্য সম্পাদন করুন"
@@ -1081,7 +1082,6 @@ _permissions:
   "write:gallery": "গ্যালারী সম্পাদনা করুন"
   "read:gallery-likes": "গ্যালারীর পছন্দগুলি দেখুন"
   "write:gallery-likes": "গ্যালারীর পছন্দগুলি সম্পাদনা করুন"
-  "write:chat": "চ্যাটগুলি সম্পাদনা করুন"
 _auth:
   shareAccess: "\"{name}\" কে অ্যাকাউন্টের অ্যাক্সেস দিবেন?"
   shareAccessAsk: "অ্যাপ্লিকেশনটিকে অ্যাকাউন্টের অ্যাক্সেস দিবেন?"
@@ -1187,7 +1187,6 @@ _profile:
   changeBanner: "ব্যানার পরিবর্তন করুন"
 _exportOrImport:
   allNotes: "সকল নোট"
-  clips: "ক্লিপ"
   followingList: "অনুসরণ করা হচ্ছে"
   muteList: "মিউট"
   blockingList: "ব্লক"
@@ -1235,6 +1234,9 @@ _pages:
   newPage: "নতুন পৃষ্ঠা বানান"
   editPage: "পৃষ্ঠাটি সম্পাদনা করুন"
   readPage: "উৎস দেখছেন"
+  created: "পৃষ্ঠা তৈরি করা হয়েছে"
+  updated: "পৃষ্ঠা সম্পাদনা করা হয়েছে"
+  deleted: "পৃষ্ঠা মুছে ফেলা হয়েছে"
   pageSetting: "পৃষ্ঠার সেটিংস"
   nameAlreadyExists: "পৃষ্ঠার URLটি ইতিমধ্যেই ব্যাবহার করা হয়েছে"
   invalidNameTitle: "পৃষ্ঠার URL অবৈধ"
@@ -1303,7 +1305,6 @@ _notification:
     pollEnded: "পোল শেষ"
     receiveFollowRequest: "প্রাপ্ত অনুসরণের অনুরোধসমূহ"
     followRequestAccepted: "গৃহীত অনুসরণের অনুরোধসমূহ"
-    login: "প্রবেশ করুন"
     app: "লিঙ্ক করা অ্যাপ থেকে বিজ্ঞপ্তি"
   _actions:
     followBack: "ফলো ব্যাক করেছে"
@@ -1334,18 +1335,3 @@ _deck:
 _webhookSettings:
   name: "নাম"
   active: "চালু"
-_abuseReport:
-  _notificationRecipient:
-    _recipientType:
-      mail: "ইমেইল"
-_moderationLogTypes:
-  suspend: "স্থগিত করা"
-  resetPassword: "পাসওয়ার্ড রিসেট করুন"
-_reversi:
-  total: "মোট"
-_remoteLookupErrors:
-  _noSuchObject:
-    title: "পাওয়া যায়নি"
-_search:
-  searchScopeAll: "সবগুলো"
-  searchScopeLocal: "স্থানীয়"

locales/da-DK.yml

@@ -1,4 +1,2 @@
 ---
 _lang_: "Dansk"
-headlineMisskey: ""
-introMisskey: "ようこそ！Misskeyは、オープンソースの分散型マイクロブログサービスです。\n「ノート」を作成して、いま起こっていることを共有したり、あなたについて皆に発信しよう📡\n「リアクション」機能で、皆のノートに素早く反応を追加することもできます👍\n新しい世界を探検しよう🚀"

locales/el-GR.yml

@@ -104,6 +104,7 @@ clickToShow: "Κάντε κλικ για εμφάνιση"
 add: "Προσθέστε"
 reaction: "Αντιδράσεις"
 reactions: "Αντιδράσεις"
+reactionSetting: "Αντιδράσεις για εμφάνιση στην επιλογή αντίδρασης"
 reactionSettingDescription2: "Σύρετε για να αλλάξετε τη σειρά, κάντε κλικ για να διαγράψετε, πατήστε \"+\" για να προσθέσετε."
 rememberNoteVisibility: "Θυμήσου τις ρυθμίσεις ορατότητας σημειώματος"
 attachCancel: "Διαγραφή αρχείου"
@@ -162,12 +163,14 @@ imageUrl: "URL εικόνας"
 remove: "Διαγραφή"
 removed: "Η διαγραφή ολοκληρώθηκε επιτυχώς"
 saved: "Αποθηκεύτηκε"
+messaging: "Συνομιλία"
 upload: "Ανεβάστε"
 fromDrive: "Από τον Αποθηκευτικό Χώρο"
 fromUrl: "Από URL"
 uploadFromUrl: "Ανεβάστε από URL"
 explore: "Εξερευνήστε"
 messageRead: "Διαβάστηκε"
+startMessaging: "Ξεκινήστε μία συνομιλία"
 nUsersRead: "διαβάστηκε από {n}"
 start: "Ας αρχίσουμε"
 home: "Κεντρικό"
@@ -225,6 +228,7 @@ userList: "Λίστες"
 about: "Πληροφορίες"
 moderator: "Συντονιστής"
 moderation: "Συντονισμός"
+cacheClear: "Εκκαθάριση προσωρινής μνήμης"
 markAsReadAllNotifications: "Όλες οι ειδοποιήσεις διαβάστηκαν"
 members: "Μέλη"
 transfer: "Μεταφορά"
@@ -283,14 +287,6 @@ searchByGoogle: "Αναζήτηση"
 file: "Αρχεία"
 recommended: "Προτεινόμενα"
 cannotUploadBecauseNoFreeSpace: "Το ανέβασμα απέτυχε λόγω ανεπαρκούς Αποθηκευτικού Χώρου"
-icon: "Εικονίδιο"
-replies: "Απάντηση"
-renotes: "Κοινοποίηση σημειώματος"
-postForm: "Φόρμα δημοσίευσης"
-information: "Πληροφορίες"
-_chat:
-  members: "Μέλη"
-  home: "Κεντρικό"
 _email:
   _follow:
     title: "Έχετε ένα νέο ακόλουθο"
@@ -304,6 +300,10 @@ _theme:
 _sfx:
   note: "Σημειώματα"
   notification: "Ειδοποιήσεις"
+  chat: "Συνομιλία"
+  chatBg: "Συνομιλία (Παρασκήνιο)"
+  antenna: "Αντένες"
+  channel: "Ειδοποιήσεις καναλιών"
 _ago:
   future: "Μελλοντικό"
   justNow: "Μόλις τώρα"
@@ -324,7 +324,6 @@ _permissions:
   "write:notifications": "Διαχειριστείτε τις ειδοποιήσεις σας"
   "read:pages": "Δείτε τις Σελίδες σας"
   "write:pages": "Επεξεργαστείτε ή διαγράψτε τις σελίδες σας"
-  "write:chat": "Γράψτε ή διαγράψτε μηνύματα συνομιλίας"
 _antennaSources:
   all: "Όλα τα σημειώματα"
   homeTimeline: "Σημειώματα από μέλη που ακολουθείτε"
@@ -358,7 +357,6 @@ _profile:
   username: "Όνομα μέλους"
 _exportOrImport:
   allNotes: "Όλα τα σημειώματα"
-  clips: "Κλιπ"
   followingList: "Ακολουθεί"
   muteList: "Μέλη σε σίγαση"
   blockingList: "Μπλοκαρισμένα μέλη"
@@ -382,7 +380,6 @@ _notification:
     renote: "Κοινοποίηση σημειώματος"
     quote: "Παράθεση"
     reaction: "Αντιδράσεις"
-    login: "Σύνδεση"
   _actions:
     reply: "Απάντηση"
     renote: "Κοινοποίηση σημειώματος"
@@ -397,9 +394,3 @@ _deck:
     mentions: "Επισημάνσεις"
 _webhookSettings:
   name: "Όνομα"
-_moderationLogTypes:
-  suspend: "Αποβολή"
-_reversi:
-  total: "Σύνολο"
-_search:
-  searchScopeLocal: "Τοπικό"

locales/generateDTS.js

@@ -1,230 +1,72 @@
-import * as fs from 'node:fs';
+const fs = require('fs');
-import { fileURLToPath } from 'node:url';
+const yaml = require('js-yaml');
-import { dirname } from 'node:path';
+const ts = require('typescript');
-import * as yaml from 'js-yaml';
-import ts from 'typescript';
-
-const __filename = fileURLToPath(import.meta.url);
-const __dirname = dirname(__filename);
-const parameterRegExp = /\{(\w+)\}/g;
-
-function createMemberType(item) {
-	if (typeof item !== 'string') {
-		return ts.factory.createTypeLiteralNode(createMembers(item));
-	}
-	const parameters = Array.from(
-		item.matchAll(parameterRegExp),
-		([, parameter]) => parameter,
-	);
-	return parameters.length
-		? ts.factory.createTypeReferenceNode(
-				ts.factory.createIdentifier('ParameterizedString'),
-				[
-					ts.factory.createUnionTypeNode(
-						parameters.map((parameter) =>
-							ts.factory.createStringLiteral(parameter),
-						),
-					),
-				],
-			)
-		: ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword);
-}
 
 function createMembers(record) {
-	return Object.entries(record).map(([k, v]) => {
+	return Object.entries(record)
-		const node = ts.factory.createPropertySignature(
+		.map(([k, v]) => ts.factory.createPropertySignature(
 			undefined,
 			ts.factory.createStringLiteral(k),
 			undefined,
-			createMemberType(v),
+			typeof v === 'string'
-		);
+				? ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword)
-		if (typeof v === 'string') {
+				: ts.factory.createTypeLiteralNode(createMembers(v)),
-			ts.addSyntheticLeadingComment(
+		));
-				node,
-				ts.SyntaxKind.MultiLineCommentTrivia,
-				`*
- * ${v.replace(/\n/g, '\n * ')}
- `,
-				true,
-			);
-		}
-		return node;
-	});
 }
 
-export default function generateDTS() {
+module.exports = function generateDTS() {
 	const locale = yaml.load(fs.readFileSync(`${__dirname}/ja-JP.yml`, 'utf-8'));
 	const members = createMembers(locale);
 	const elements = [
-		ts.factory.createVariableStatement(
-			[ts.factory.createToken(ts.SyntaxKind.DeclareKeyword)],
-			ts.factory.createVariableDeclarationList(
-				[
-					ts.factory.createVariableDeclaration(
-						ts.factory.createIdentifier('kParameters'),
-						undefined,
-						ts.factory.createTypeOperatorNode(
-							ts.SyntaxKind.UniqueKeyword,
-							ts.factory.createKeywordTypeNode(ts.SyntaxKind.SymbolKeyword),
-						),
-						undefined,
-					),
-				],
-				ts.NodeFlags.Const,
-			),
-		),
-		ts.factory.createInterfaceDeclaration(
-			[ts.factory.createToken(ts.SyntaxKind.ExportKeyword)],
-			ts.factory.createIdentifier('ParameterizedString'),
-			[
-				ts.factory.createTypeParameterDeclaration(
-					undefined,
-					ts.factory.createIdentifier('T'),
-					ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword),
-					ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword),
-				),
-			],
-			undefined,
-			[
-				ts.factory.createPropertySignature(
-					undefined,
-					ts.factory.createComputedPropertyName(
-						ts.factory.createIdentifier('kParameters'),
-					),
-					undefined,
-					ts.factory.createTypeReferenceNode(
-						ts.factory.createIdentifier('T'),
-						undefined,
-					),
-				),
-			],
-		),
-		ts.factory.createInterfaceDeclaration(
-			[ts.factory.createToken(ts.SyntaxKind.ExportKeyword)],
-			ts.factory.createIdentifier('ILocale'),
-			undefined,
-			undefined,
-			[
-				ts.factory.createIndexSignature(
-					undefined,
-					[
-						ts.factory.createParameterDeclaration(
-							undefined,
-							undefined,
-							ts.factory.createIdentifier('_'),
-							undefined,
-							ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword),
-							undefined,
-						),
-					],
-					ts.factory.createUnionTypeNode([
-						ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword),
-						ts.factory.createTypeReferenceNode(
-							ts.factory.createIdentifier('ParameterizedString'),
-						),
-						ts.factory.createTypeReferenceNode(
-							ts.factory.createIdentifier('ILocale'),
-							undefined,
-						),
-					]),
-				),
-			],
-		),
 		ts.factory.createInterfaceDeclaration(
 			[ts.factory.createToken(ts.SyntaxKind.ExportKeyword)],
 			ts.factory.createIdentifier('Locale'),
 			undefined,
-			[
+			undefined,
-				ts.factory.createHeritageClause(ts.SyntaxKind.ExtendsKeyword, [
-					ts.factory.createExpressionWithTypeArguments(
-						ts.factory.createIdentifier('ILocale'),
-						undefined,
-					),
-				]),
-			],
 			members,
 		),
 		ts.factory.createVariableStatement(
 			[ts.factory.createToken(ts.SyntaxKind.DeclareKeyword)],
 			ts.factory.createVariableDeclarationList(
-				[
+				[ts.factory.createVariableDeclaration(
-					ts.factory.createVariableDeclaration(
+					ts.factory.createIdentifier('locales'),
-						ts.factory.createIdentifier('locales'),
+					undefined,
+					ts.factory.createTypeLiteralNode([ts.factory.createIndexSignature(
 						undefined,
-						ts.factory.createTypeLiteralNode([
+						[ts.factory.createParameterDeclaration(
-							ts.factory.createIndexSignature(
+							undefined,
-								undefined,
+							undefined,
-								[
+							ts.factory.createIdentifier('lang'),
-									ts.factory.createParameterDeclaration(
+							undefined,
-										undefined,
+							ts.factory.createKeywordTypeNode(ts.SyntaxKind.StringKeyword),
-										undefined,
+							undefined,
-										ts.factory.createIdentifier('lang'),
+						)],
-										undefined,
+						ts.factory.createTypeReferenceNode(
-										ts.factory.createKeywordTypeNode(
+							ts.factory.createIdentifier('Locale'),
-											ts.SyntaxKind.StringKeyword,
+							undefined,
-										),
+						),
-										undefined,
+					)]),
-									),
+					undefined,
-								],
+				)],
-								ts.factory.createTypeReferenceNode(
+				ts.NodeFlags.Const | ts.NodeFlags.Ambient | ts.NodeFlags.ContextFlags,
-									ts.factory.createIdentifier('Locale'),
-									undefined,
-								),
-							),
-						]),
-						undefined,
-					),
-				],
-				ts.NodeFlags.Const,
 			),
 		),
-		ts.factory.createFunctionDeclaration(
+		ts.factory.createExportAssignment(
-			[ts.factory.createModifier(ts.SyntaxKind.ExportKeyword)],
-			undefined,
-			ts.factory.createIdentifier('build'),
-			undefined,
-			[],
-			ts.factory.createTypeReferenceNode(
-				ts.factory.createIdentifier('Locale'),
-				undefined,
-			),
 			undefined,
+			true,
+			ts.factory.createIdentifier('locales'),
 		),
-		ts.factory.createExportDefault(ts.factory.createIdentifier('locales')),
 	];
-	ts.addSyntheticLeadingComment(
+	const printed = ts.createPrinter({
-		elements[0],
+		newLine: ts.NewLineKind.LineFeed,
-		ts.SyntaxKind.MultiLineCommentTrivia,
+	}).printList(
-		' eslint-disable ',
+		ts.ListFormat.MultiLine,
-		true,
+		ts.factory.createNodeArray(elements),
+		ts.createSourceFile('index.d.ts', '', ts.ScriptTarget.ESNext, true, ts.ScriptKind.TS),
 	);
-	ts.addSyntheticLeadingComment(
-		elements[0],
-		ts.SyntaxKind.SingleLineCommentTrivia,
-		' This file is generated by locales/generateDTS.js',
-		true,
-	);
-	ts.addSyntheticLeadingComment(
-		elements[0],
-		ts.SyntaxKind.SingleLineCommentTrivia,
-		' Do not edit this file directly.',
-		true,
-	);
-	const printed = ts
-		.createPrinter({
-			newLine: ts.NewLineKind.LineFeed,
-		})
-		.printList(
-			ts.ListFormat.MultiLine,
-			ts.factory.createNodeArray(elements),
-			ts.createSourceFile(
-				'index.d.ts',
-				'',
-				ts.ScriptTarget.ESNext,
-				true,
-				ts.ScriptKind.TS,
-			),
-		);
 
-	fs.writeFileSync(`${__dirname}/index.d.ts`, printed, 'utf-8');
+	fs.writeFileSync(`${__dirname}/index.d.ts`, `/* eslint-disable */
+// This file is generated by locales/generateDTS.js
+// Do not edit this file directly.
+${printed}`, 'utf-8');
 }

locales/hr-HR.yml

@@ -1,5 +1 @@
 ---
-_lang_: "japanski"
-ok: "OK"
-gotIt: "Razumijem"
-cancel: "otkazati"