wasp: Re-enable REPL by default

The demo is still there but it needs to be activated by hand
(or the manifest can be updated to include main.py by default.

README.md

@@ -1,33 +1,55 @@
 Watch Application System in Python
 ==================================
 
-Despite the grand ambitions of the name, currently this repo simply 
-combines a bootloader, derived from the Adafruit NRF52 bootloader, with 
-MicroPython. Both have been ported to Pine64 PineTime and the Desay
-DS-D6 fitness band.
+Currently WASP is primarily useful as a pre-packaged MicroPython
+development environment for PineTime. Whilst there are plans to grow 
+it into a smart watch runtime for Pine64 PineTime and the Desay
+DS-D6 fitness  tracker this goal has yet to be achieved.
 
-Try:
+WASP includes a robust bootloader based on the Adafruit NRF52
+Bootloader. It has been extended to make it robust for development on
+form-factor devices without a reset button, power switch, SWD debugger
+or UART. This allows us to confidently develop on sealed devices relying
+only on BLE for updates.
+
+Building from a git clone
+-------------------------
 
 ~~~
 make submodules
 make softdevice
-make -j `nproc` all
-make flash
+make -j `nproc` BOARD=pinetime all
 ~~~
 
-Then use nRFConnect (for Android) to program micropython.zip.
+Installing
+----------
 
-At the end of this process your watch may *look* dead but, if it works, 
-you will be able to use the Nordic UART Service to access the 
-MicroPython REPL.
+Note: *If you have a new PineTime then it will have been delivered with
+flash protection enabled. You must disable the flash protection before
+trying to program it.*
 
-Drivers are, for the most part, an exercise for the reader but
-there is a proof-of-concept display driver. To experiment try:
+* Use an SWD programmer to install `bootloader.hex` to the PineTime.
+  This file is an Intel HEX file containing both the bootloader and
+  the Nordic SoftDevice. Be careful to disconnect cleanly from the
+  debug software since just pulling out the SWD cable will mean the
+  nRF52 will still believe it is being debugged.
+* Copy `micropython.zip` to your Android device and download nRF Connect
+  for Android if you do not already have it.
+* In nRF Connect, choose settings and reduce the DFU packet count from
+  10 to 4.
+* Connect to PineDFU using nRFConnect, click the DFU button and send
+  `micropython.zip` to the device.
+
+At the end of this process your watch you will see a couple of splash
+screens (bootloader shows a small Pine64 logo, MicroPython shows are
+larger one). Once the second splash screen appears you will be able to 
+use the Nordic UART Service to access the MicroPython REPL.
+
+Drivers are still in development, see the [TODO list](todo.md) for
+current status. In the mean time try the following and then take
+a look at the `wasp/` directory to see how it works:
 
 ~~~
-import pinetime, time
-tft = pinetime.st7789()
-tft.white()
-time.sleep(2)
-tft.black()
+import demo
+demo.run()
 ~~~

TODO.md

@@ -34,7 +34,7 @@ The TODO list helps keep track on progress towards that goal. It is not
    - [ ] Bitmap blitting
    - [X] RLE coder and decoder
    - [ ] Optimized RLE inner loops
- * [ ] Backlight driver
+ * [X] Backlight driver
  * [ ] Button driver (interrupt based)
  * [ ] Battery/charger driver
  * [ ] Simple clock and battery level application

manifest/pinetime.py

@@ -1,6 +1,6 @@
 freeze('$(MPY_DIR)/../wasp',
     (
-        'main.py',
+        'boot.py',
         'demo.py',
         'drivers/st7789.py',
         'logo.py',

micropython

@@ -1 +1 @@
-Subproject commit b6f0dee43e4c51afad6a0b1badd534df7a4494ad
+Subproject commit e668ed3ed3778bf5aea08e766cc8d82eb0a4c247

wasp/boot.py

@@ -0,0 +1,6 @@
+import logo
+import pinetime
+
+pinetime.display.rleblit(logo.pine64, fg=0xffff)
+
+

wasp/demo.py

@@ -24,10 +24,6 @@ colors = (
         0xf81f, # magenta
     )
 
-# Let's keep this where we can find it if someone delivers ^C to the
-# demo
-tft = pinetime.st7789()
-
 def run():
     l = logo.pine64
     i = 0
@@ -42,8 +38,8 @@ def run():
                     l = logo.micropython
                 else:
                     l = logo.pine64
-                tft.fill(0)
+                pinetime.display.fill(0)
 
-            tft.rleblit(l, fg=c)
+            pinetime.display.rleblit(l, fg=c)
             time.sleep(2)
             gc.collect()

wasp/pinetime.py

@@ -3,18 +3,44 @@ from machine import SPI
 
 from drivers.st7789 import ST7789_SPI
 
-def st7789():
-    spi = SPI(0)
-    # Mode 3, maximum clock speed!
-    spi.init(polarity=1, phase=1, baudrate=8000000)
+class Display(ST7789_SPI):
+    def __init__(self):
+        spi = SPI(0)
+        # Mode 3, maximum clock speed!
+        spi.init(polarity=1, phase=1, baudrate=8000000)
     
-    # Configure the display
-    cs = Pin("SPI_SS2", Pin.OUT)
-    dc = Pin("P18", Pin.OUT)
-    rst = Pin("P26", Pin.OUT)
-    tft = ST7789_SPI(240, 240, spi, cs=cs, dc=dc, res=rst)
+        # Configure the display
+        cs = Pin("DISP_CS", Pin.OUT)
+        dc = Pin("DISP_DC", Pin.OUT)
+        rst = Pin("DISP_RST", Pin.OUT)
 
-    # Bring up the backlight
-    bl = Pin("P22", Pin.OUT)
-    bl.off() # active low
-    return tft
+        super().__init__(240, 240, spi, cs=cs, dc=dc, res=rst)
+
+class Backlight(object):
+    lo = Pin("BL_LO", Pin.OUT, value=0)
+    mid = Pin("BL_MID", Pin.OUT, value=1)
+    hi = Pin("BL_HI", Pin.OUT, value=1)
+
+    def __init__(self, level=1):
+        self.set(level)
+
+    def set(self, level):
+        hi = 1
+        mid = 1
+        lo = 1
+
+        if level >= 3:
+            hi = 0
+        elif level == 2:
+            mid = 0
+        elif level == 1:
+            lo = 0
+
+        self.hi(hi)
+        self.mid(mid)
+        self.lo(lo)
+
+backlight = Backlight(0)
+display = Display()
+
+backlight.set(1)