wasp/boards/pinetime/manifest.py

@@ -22,7 +22,6 @@ freeze('../..', manifest_240x240.manifest +
         'gadgetbridge.py',
         'ppg.py',
         'shell.py',
-        'motion.py',
         'wasp.py',
     ),
     opt=3

wasp/boards/pinetime/watch.py.in

@@ -90,7 +90,7 @@ try:
             Signal(Pin('CHARGING', Pin.IN), invert=True),
             Signal(Pin('USB_PWR', Pin.IN), invert=True))
     i2c = I2C(1, scl='I2C_SCL', sda='I2C_SDA')
-    accel = BMA421(i2c, Pin('ACCEL_INT', Pin.IN))
+    accel = BMA421(i2c)
     hrs = HRS3300(i2c)
     touch = CST816S(i2c,
                     Pin('TP_INT', Pin.IN), Pin('TP_RST', Pin.OUT, value=0),

wasp/drivers/bma421.py

@@ -7,8 +7,6 @@
 
 import bma42x
 import time
-import motion
-from machine import Pin
 
 # Sensor orientation definition.
 # The 6 most significant bits define the indexes of the x, y, and z values
@@ -19,7 +17,7 @@ from machine import Pin
 #         Y index ───────────────┐ │
 #         X index ─────────────┐ │ │
 #                              ├┐├┐├┐
-_DEFAULT_ORIENTATION = const(0b010010000)
+_DEFAULT_ORIENTATION = const(0b010010101)
 #          1 = keep, 0 = negate      │││
 #          X sign ───────────────────┘││
 #          Y sign ────────────────────┘│
@@ -30,19 +28,13 @@ class BMA421:
 
     .. automethod:: __init__
     """
-    def __init__(self, i2c, intr=None, orientation=_DEFAULT_ORIENTATION):
+    def __init__(self, i2c, orientation=_DEFAULT_ORIENTATION):
         """Configure the driver.
 
         :param machine.I2C i2c: I2C bus used to access the sensor.
         """
         self._dev = bma42x.BMA42X(i2c)
         self._orientation = orientation
-        self._gesture_int = intr
-        self._gesture_event = motion.AccelGestureEvent.NONE
-        self.hardware_gesture_available = False
-
-        if self._gesture_int != None:
-            self._gesture_int.irq(trigger=Pin.IRQ_FALLING, handler=self.handle_interrupt)
 
     def reset(self):
         """Reset and reinitialize the sensor."""
@@ -63,36 +55,6 @@ class BMA421:
                                perf_mode=bma42x.CIC_AVG_MODE)
         dev.feature_enable(bma42x.STEP_CNTR, True)
 
-        # Set axes remapping
-        # This works only for hardware-based intelligence.
-        # Software readout is remapped manually in accel_xyz().
-        dev.set_remap_axes(self._orientation)
-
-        self.hardware_gesture_available = dev.get_chip_id() == bma42x.BMA425_CHIP_ID
-
-        # Enable gesture interrupts
-        if self.hardware_gesture_available:
-            dev.set_int_pin_config(int_line=bma42x.INTR1_MAP,
-                                     edge_ctrl=bma42x.LEVEL_TRIGGER,
-                                     lvl=bma42x.ACTIVE_LOW,
-                                     od=bma42x.PUSH_PULL,
-                                     output_en=True, input_en=False)
-            dev.feature_enable(bma42x.WRIST_WEAR, True)
-            dev.map_interrupt(bma42x.INTR1_MAP, bma42x.WRIST_WEAR_INT, True)
-
-    def handle_interrupt(self, pin_obj):
-        """Interrupt handler for gesture events originating from the sensor"""
-        self._dev.read_int_status() # TODO: Actually read status from the register
-        self._gesture_event = motion.AccelGestureEvent.WRIST_TILT
-
-    def get_gesture_event(self):
-        """Receive the latest gesture event if any"""
-        return self._gesture_event
-
-    def reset_gesture_event(self):
-        """Call after processing the gesture event"""
-        self._gesture_event = motion.AccelGestureEvent.NONE
-
     @property
     def steps(self):
         """Report the number of steps counted."""

wasp/modules/bma42x-upy

@@ -1 +1 @@
-Subproject commit 30b19fec7c1d05abd533ce46dcbe2d1a38f56a0c
+Subproject commit b968b2530440afae8b555613e89b1240afcf4da2

wasp/motion.py

@@ -1,7 +0,0 @@
-from micropython import const
-
-class AccelGestureEvent():
-    """Enumerated ids for accelerometer-based gesture events
-    """
-    NONE = const(0)
-    WRIST_TILT = const(1)

wasp/wasp.py

@@ -20,7 +20,6 @@ import micropython
 import sys
 import watch
 import widgets
-import motion
 
 from apps.launcher import LauncherApp
 from apps.pager import PagerApp, CrashApp, NotificationApp
@@ -158,8 +157,6 @@ class Manager():
     def secondary_init(self):
         global free
 
-        watch.accel.reset()
-
         if not self.app:
             # Register default apps if main hasn't put anything on the quick ring
             if not self.quick_ring:
@@ -499,16 +496,11 @@ class Manager():
                 self.wake()
 
         if self.raise_wake:
-            if watch.accel.hardware_gesture_available:
-                if watch.accel.get_gesture_event() == motion.AccelGestureEvent.WRIST_TILT:
-                    watch.accel.reset_gesture_event()
+            now = rtc.get_uptime_ms()
+            if now >= self.accel_poll_expiry:
+                self.accel_poll_expiry = (now + self.accel_poll_ms)
+                if self._do_raise_wake():
                     self.wake()
-            else:
-                now = rtc.get_uptime_ms()
-                if now >= self.accel_poll_expiry:
-                    self.accel_poll_expiry = (now + self.accel_poll_ms)
-                    if self._do_raise_wake():
-                        self.wake()
     
     def _do_raise_wake(self):