diff --git a/Xiaomi/Mi11Lite5G/res/values/config.xml b/Xiaomi/Mi11Lite5G/res/values/config.xml
index c101c0a..d4fd841 100644
--- a/Xiaomi/Mi11Lite5G/res/values/config.xml
+++ b/Xiaomi/Mi11Lite5G/res/values/config.xml
@@ -1,268 +1,22 @@
 <?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2017, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
 <resources>
-     <!-- The bounding path of the cutout region of the main built-in display.
-         Must either be empty if there is no cutout region, or a string that is parsable by
-         {@link android.util.PathParser}.
-         The path is assumed to be specified in display coordinates with pixel units and in
-         the display's native orientation, with the origin of the coordinate system at the
-         center top of the display.
-         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
-         appended after the path string to interpret coordinates in dp instead of px units.
-         Note that a physical cutout should be configured in pixels for the best results.
-         Example for a 10px x 10px square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
-         Example for a 10dp x 10dp square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
-         @see https://www.w3.org/TR/SVG/paths.html#PathData -->
     <string name="config_mainBuiltInDisplayCutout">M 0,0 H 144 V 104 H 0 V 0 Z @left</string>
 
-    <!-- Height of the status bar in portrait. The height should be
-         Max((status bar content height + waterfall top size), top cutout size) -->
-    <dimen name="status_bar_height_portrait">104px</dimen>
-
-    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
-         autodetected from the Configuration. -->
-    <bool name="config_showNavigationBar">true</bool>
-
-    <!-- This string array should be overridden by the device to present a list of network
-         attributes.  This is used by the connectivity manager to decide which networks can coexist
-         based on the hardware -->
-    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
-         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
-    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
-         before automatically restore the default connection.  Set -1 if the connection
-         does not require auto-restore. -->
-    <!-- the 6th element indicates boot-time dependency-met value. -->
-    <string-array name="networkAttributes">
-        <item>wifi,1,1,1,-1,true</item>
-        <item>mobile,0,0,0,-1,true</item>
-        <item>mobile_mms,2,0,4,60000,true</item>
-        <item>mobile_supl,3,0,2,60000,true</item>
-        <item>mobile_dun,4,0,2,60000,true</item>
-        <item>mobile_hipri,5,0,3,60000,true</item>
-        <item>mobile_fota,10,0,2,60000,true</item>
-        <item>mobile_ims,11,0,2,60000,true</item>
-        <item>mobile_cbs,12,0,2,60000,true</item>
-        <item>bluetooth,7,7,2,-1,true</item>
-        <item>mobile_emergency,15,0,5,-1,true</item>
-        <item>ethernet,9,9,9,-1,true</item>
-        <item>wifi_slave,30,1,1,-1,true</item>
-    </string-array>
-
-    <!-- Configure mobile tcp buffer sizes in the form:
-         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
-         If no value is found for the rat-name in use, the system default will be applied. -->
-    <string-array name="config_mobile_tcp_buffers">
-        <item>5gnr:2097152,6291456,16777216,512000,2097152,8388608</item>
-        <item>lte:2097152,4194304,8388608,262144,524288,1048576</item>
-        <item>lte_ca:4096,6291456,12582912,4096,1048576,2097152</item>
-        <item>umts:4094,87380,1220608,4096,16384,1220608</item>
-        <item>hspa:4094,87380,1220608,4096,16384,1220608</item>
-        <item>hsupa:4094,87380,1220608,4096,16384,1220608</item>
-        <item>hsdpa:4094,87380,1220608,4096,16384,1220608</item>
-        <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
-        <item>edge:4093,26280,35040,4096,16384,35040</item>
-        <item>gprs:4092,8760,11680,4096,8760,11680</item>
-        <item>evdo:4094,87380,524288,4096,16384,262144</item>
-    </string-array>
-
-    <!-- This string array should be overridden by the device to present a list of radio
-         attributes.  This is used by the connectivity manager to decide which networks can coexist
-         based on the hardware -->
-    <!-- An Array of "[ConnectivityManager connectionType],
-                      [# simultaneous connection types]"  -->
-    <string-array name="radioAttributes">
-        <item>"1,1"</item>
-        <item>"0,1"</item>
-        <item>"7,1"</item>
-    </string-array>
-
-    <!-- String indicating the package name of the device ImsService implementation for RCS. -->
-    <string name="config_ims_package">org.codeaurora.ims</string>
-
-    <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
-    <bool name="config_dynamic_bind_ims">true</bool>
-
-    <!-- Flag specifying whether VoLTE should be available for carrier: independent of
-         carrier provisioning. If false: hard disabled. If true: then depends on carrier
-         provisioning, availability etc -->
-    <bool name="config_carrier_volte_available">true</bool>
-
-    <!-- Flag specifying whether VoLTE is available on device -->
-    <bool name="config_device_volte_available">true</bool>
-
-    <!-- Flag specifying whether VoLTE is available on device -->
-    <bool name="config_device_vt_available">true</bool>
-
-    <!-- Flag specifying whether WFC over IMS is available on device -->
-    <bool name="config_device_wfc_ims_available">true</bool>
-
-    <!-- Flag specifying whether WFC over IMS should be available for carrier: independent of
-         carrier provisioning. If false: hard disabled. If true: then depends on carrier
-         provisioning, availability etc -->
-    <bool name="config_carrier_wfc_ims_available">true</bool>
-
-    <!-- Boolean indicating if restoring network selection should be skipped -->
-    <!-- The restoring is handled by modem if it is true-->
-    <bool name="skip_restoring_network_selection">true</bool>
-
-    <!-- Config determines whether to update phone object when voice registration
-         state changes. Voice radio tech change will always trigger an update of
-         phone object irrespective of this config -->
-    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>
-
-    <!-- Is the device capable of hot swapping an ICC Card -->
-    <bool name="config_hotswapCapable">true</bool>
-
-    <!-- If true, the display will be shifted around in ambient mode. -->
-    <bool name="config_enableBurnInProtection">true</bool>
-
-    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
-         on the headphone/microphone jack. When false use the older uevent framework. -->
     <bool name="config_useDevInputEventForAudioJack">true</bool>
-
-    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
-    <bool name="config_intrusiveNotificationLed">true</bool>
-
-    <!-- Whether the Unprocessed audio source supports the required frequency range and level -->
     <bool name="config_supportAudioSourceUnprocessed">true</bool>
-
-    <!-- Idle current for bluetooth controller. 0 by default-->
-    <integer name="config_bluetooth_idle_cur_ma">6</integer>
-
-    <!-- Rx current for bluetooth controller. 0 by default-->
-    <integer name="config_bluetooth_rx_cur_ma">28</integer>
-
-    <!-- Tx current for bluetooth controller. 0 by default-->
-    <integer name="config_bluetooth_tx_cur_ma">36</integer>
-
-    <!-- Operating voltage for bluetooth controller. 0 by default-->
-    <integer name="config_bluetooth_operating_voltage_mv">3700</integer>
-
-    <!-- Should the pinner service pin the Camera application? -->
-    <bool name="config_pinnerCameraApp">true</bool>
-
-    <!-- Should the pinner service pin the Home application? -->
-    <bool name="config_pinnerHomeApp">true</bool>
-
-    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
-         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
-         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
-         and Strength as defined in Authenticators.java -->
-    <string-array name="config_biometric_sensors" translatable="false" >
-        <!-- ID0:Fingerprint:Strong -->
-        <item>0:2:15</item>
-    </string-array>
-
-    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
-        the framework from using higher refresh rates, even if display modes with higher refresh
-        rates are available from hardware composer. Only has an effect if the value is
-        non-zero. -->
-    <integer name="config_defaultPeakRefreshRate">90</integer>
-
-    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
-         in hardware. -->
+    <bool name="config_showNavigationBar">true</bool>
+    <bool name="config_enableBurnInProtection">true</bool>
     <bool name="config_setColorTransformAccelerated">true</bool>
-
-    <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
-         device from the display on/off state.
-         When false, autosuspend_disable() will be called before the display is turned on
-         and autosuspend_enable() will be called after the display is turned off.
-         This mode provides best compatibility for devices using legacy power management
-         features such as early suspend / late resume.
-         When true, autosuspend_display() and autosuspend_enable() will be called
-         independently of whether the display is being turned on or off.  This mode
-         enables the power manager to suspend the application processor while the
-         display is on.
-         This resource should be set to "true" when a doze component has been specified
-         to maximize power savings but not all devices support it.
-         Refer to autosuspend.h for details.
-    -->
-    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
-
-    <!-- Power Management: Specifies whether to decouple the interactive state of the
-         device from the display on/off state.
-         When false, setInteractive(..., true) will be called before the display is turned on
-         and setInteractive(..., false) will be called after the display is turned off.
-         This mode provides best compatibility for devices that expect the interactive
-         state to be tied to the display state.
-         When true, setInteractive(...) will be called independently of whether the display
-         is being turned on or off.  This mode enables the power manager to reduce
-         clocks and disable the touch controller while the display is on.
-         This resource should be set to "true" when a doze component has been specified
-         to maximize power savings but not all devices support it.
-         Refer to power.h for details. -->
-    <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
-
-    <!-- If true, the doze component is not started until after the screen has been
-         turned off and the screen off animation has been performed. -->
     <bool name="config_dozeAfterScreenOffByDefault">true</bool>
-
-    <!-- Enable doze alwaysOn Display -->
     <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
-
-    <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
-    <bool name="config_dozePulsePickup">true</bool>
-
-    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
-         May be less than the minimum allowed brightness setting
-         that can be set by the user. -->
-    <integer name="config_screenBrightnessDoze">17</integer>
-
-    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
-         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
     <bool name="config_automatic_brightness_available">true</bool>
 
-    <!-- True if the display hardware only has brightness buckets rather than a full range of
-         backlight values -->
-    <bool name="config_displayBrightnessBucketsInDoze">true</bool>
-
-    <!-- The maximum range of gamma adjustment possible using the screen
-         auto-brightness adjustment setting. -->
     <fraction name="config_autoBrightnessAdjustmentMaxGamma">100%</fraction>
 
-    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
-         for debouncing the light sensor.  Different constants are used to debounce the light sensor
-         when adapting to brighter or darker environments.  This parameter controls how quickly
-         brightness changes occur in response to an observed change in light level that exceeds the
-         hysteresis threshold. -->
+    <integer name="config_screenBrightnessDoze">17</integer>
     <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
     <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
-
-    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
-         The N entries of this array define N + 1 control points as follows:
-         (1-based arrays)
-         Point 1:            (0, value[1]):             lux <= 0
-         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
-         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
-         ...
-         Point N+1: (level[N], value[N+1]):  level[N] < lux
-         The control points must be strictly increasing.  Each control point
-         corresponds to an entry in the brightness backlight values arrays.
-         For example, if LUX == level[1] (first element of the levels array)
-         then the brightness will be determined by value[2] (second element
-         of the brightness values array).
-         Spline interpolation is used to determine the auto-brightness
-         backlight values for LUX levels between these control points.
-         Must be overridden in platform specific overlays -->
-    <array name="config_autoBrightnessLevels">
+    <integer-array name="config_autoBrightnessLevels">
         <item>1</item>
         <item>2</item>
         <item>4</item>
@@ -370,19 +124,117 @@
         <item>90000</item>
         <item>95000</item>
         <item>100000</item>
-    </array>
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
-         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
-         brightness of an all-white image.
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
+    </integer-array>
+    <integer-array name="config_autoBrightnessLcdBacklightValues">
+        <item>17</item>
+        <item>26</item>
+        <item>32</item>
+        <item>81</item>
+        <item>99</item>
+        <item>121</item>
+        <item>138</item>
+        <item>187</item>
+        <item>241</item>
+        <item>310</item>
+        <item>331</item>
+        <item>335</item>
+        <item>335</item>
+        <item>335</item>
+        <item>339</item>
+        <item>339</item>
+        <item>339</item>
+        <item>343</item>
+        <item>343</item>
+        <item>347</item>
+        <item>347</item>
+        <item>347</item>
+        <item>347</item>
+        <item>351</item>
+        <item>351</item>
+        <item>355</item>
+        <item>363</item>
+        <item>368</item>
+        <item>372</item>
+        <item>380</item>
+        <item>384</item>
+        <item>392</item>
+        <item>396</item>
+        <item>404</item>
+        <item>409</item>
+        <item>413</item>
+        <item>425</item>
+        <item>429</item>
+        <item>433</item>
+        <item>441</item>
+        <item>445</item>
+        <item>454</item>
+        <item>458</item>
+        <item>466</item>
+        <item>474</item>
+        <item>560</item>
+        <item>642</item>
+        <item>736</item>
+        <item>838</item>
+        <item>924</item>
+        <item>1051</item>
+        <item>1146</item>
+        <item>1207</item>
+        <item>1510</item>
+        <item>1637</item>
+        <item>1705</item>
+        <item>1774</item>
+        <item>1842</item>
+        <item>1910</item>
+        <item>1978</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+        <item>2047</item>
+    </integer-array>
     <array name="config_autoBrightnessDisplayValuesNits">
         <item>4.5</item>
         <item>6.6</item>
@@ -493,21 +345,10 @@
         <item>985.7</item>
         <item>1000.0</item>
     </array>
-
-    <!-- An array describing the screen's backlight values corresponding to the brightness
-         values in the config_screenBrightnessNits array.
-         This array should be equal in size to config_screenBrightnessBacklight. -->
     <array name="config_screenBrightnessBacklight">
         <item>1</item>
         <item>255</item>
     </array>
-
-    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
-         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
-         should be measured with an all white image while the display is in the fully on state.
-         Note that this value should *not* reflect the maximum brightness value for any high
-         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
-         This array should be equal in size to config_screenBrightnessBacklight -->
     <array name="config_screenBrightnessNits">
         <item>4.5</item>
         <item>1000</item>
diff --git a/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml b/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml
index c7fb257..2af6e16 100644
--- a/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml
+++ b/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml
@@ -1,123 +1,123 @@
-<?xml version="1.0" encoding="utf-8"?>
-<device name="Android">
-    <item name="none">0</item>
-    <item name="screen.on">103.76</item>
-    <item name="screen.full">448.43</item>
-    <array name="cpu.clusters.cores">
-        <value>4</value>
-        <value>3</value>
-        <value>1</value>
-    </array>
-    <array name="cpu.core_speeds.cluster0">
-        <value>300000</value>
-        <value>576000</value>
-        <value>691200</value>
-        <value>806400</value>
-        <value>940800</value>
-        <value>1171200</value>
-        <value>1324800</value>
-        <value>1516800</value>
-        <value>1670400</value>
-        <value>1804800</value>
-        <value>1900800</value>
-    </array>
-    <array name="cpu.core_power.cluster0">
-        <value>33.41</value>
-        <value>35.96</value>
-        <value>36.91</value>
-        <value>38.5</value>
-        <value>40.16</value>
-        <value>43.95</value>
-        <value>46.72</value>
-        <value>55.69</value>
-        <value>69.07</value>
-        <value>76.5</value>
-        <value>78.65</value>
-    </array>
-    <array name="cpu.core_speeds.cluster1">
-        <value>691200</value>
-        <value>940800</value>
-        <value>1209600</value>
-        <value>1344000</value>
-        <value>1497600</value>
-        <value>1651200</value>
-        <value>1900800</value>
-        <value>2131200</value>
-        <value>2208000</value>
-    </array>
-    <array name="cpu.core_power.cluster1">
-        <value>70.66</value>
-        <value>88.43</value>
-        <value>112.19</value>
-        <value>135.48</value>
-        <value>153.64</value>
-        <value>176.07</value>
-        <value>249.96</value>
-        <value>329.66</value>
-        <value>357.27</value>
-    </array>
-    <array name="cpu.core_speeds.cluster2">
-        <value>806400</value>
-        <value>1094400</value>
-        <value>1267200</value>
-        <value>1516800</value>
-        <value>1766400</value>
-        <value>1862400</value>
-        <value>2035200</value>
-        <value>2169600</value>
-        <value>2361600</value>
-        <value>2400000</value>
-    </array>
-    <array name="cpu.core_power.cluster2">
-        <value>85.09</value>
-        <value>106.46</value>
-        <value>121.37</value>
-        <value>150.8</value>
-        <value>184.33</value>
-        <value>201.27</value>
-        <value>275.3</value>
-        <value>291.09</value>
-        <value>348.8</value>
-        <value>420.74</value>
-    </array>
-    <item name="cpu.active">11.86</item>
-    <item name="cpu.idle">5.37</item>
-    <item name="cpu.suspend">0</item>
-    <item name="battery.capacity">4250</item>
-    <item name="wifi.on">2.47</item>
-    <item name="wifi.active">266.5</item>
-    <item name="wifi.scan">34.36</item>
-    <item name="dsp.audio">26.75</item>
-    <item name="dsp.video">37.04</item>
-    <item name="camera.flashlight">108.77</item>
-    <item name="camera.avg">890.77</item>
-    <item name="gps.on">73.3</item>
-    <item name="radio.active">206.15</item>
-    <item name="radio.scanning">65</item>
-    <array name="radio.on">
-        <value>1.41</value>
-        <value>1.41</value>
-    </array>
-    <item name="modem.controller.idle">6</item>
-    <item name="modem.controller.rx">180</item>
-    <item name="modem.controller.tx">186</item>
-    <item name="modem.controller.voltage">3700</item>
-    <array name="memory.bandwidths">
-        <value>17</value>
-    </array>
-    <item name="wifi.controller.idle">1</item>
-    <item name="wifi.controller.rx">152</item>
-    <item name="wifi.controller.tx">190</item>
-    <array name="wifi.controller.tx_levels">1 </array>
-    <item name="wifi.controller.voltage">3700</item>
-    <array name="wifi.batchedscan">
-        <value>.0001</value>
-        <value>.001</value>
-        <value>.01</value>
-        <value>.1</value>
-        <value>1</value>
-    </array>
-    <item name="bluetooth.active">23.97</item>
-    <item name="bluetooth.on">1.39</item>
-    <item name="bluetooth.controller.voltage">3700</item>
-</device>
\ No newline at end of file
+<?xml version="1.0" encoding="utf-8"?>
+<device name="Android">
+    <item name="none">0</item>
+    <item name="screen.on">103.76</item>
+    <item name="screen.full">448.43</item>
+    <array name="cpu.clusters.cores">
+        <value>4</value>
+        <value>3</value>
+        <value>1</value>
+    </array>
+    <array name="cpu.core_speeds.cluster0">
+        <value>300000</value>
+        <value>576000</value>
+        <value>691200</value>
+        <value>806400</value>
+        <value>940800</value>
+        <value>1171200</value>
+        <value>1324800</value>
+        <value>1516800</value>
+        <value>1670400</value>
+        <value>1804800</value>
+        <value>1900800</value>
+    </array>
+    <array name="cpu.core_power.cluster0">
+        <value>33.41</value>
+        <value>35.96</value>
+        <value>36.91</value>
+        <value>38.5</value>
+        <value>40.16</value>
+        <value>43.95</value>
+        <value>46.72</value>
+        <value>55.69</value>
+        <value>69.07</value>
+        <value>76.5</value>
+        <value>78.65</value>
+    </array>
+    <array name="cpu.core_speeds.cluster1">
+        <value>691200</value>
+        <value>940800</value>
+        <value>1209600</value>
+        <value>1344000</value>
+        <value>1497600</value>
+        <value>1651200</value>
+        <value>1900800</value>
+        <value>2131200</value>
+        <value>2208000</value>
+    </array>
+    <array name="cpu.core_power.cluster1">
+        <value>70.66</value>
+        <value>88.43</value>
+        <value>112.19</value>
+        <value>135.48</value>
+        <value>153.64</value>
+        <value>176.07</value>
+        <value>249.96</value>
+        <value>329.66</value>
+        <value>357.27</value>
+    </array>
+    <array name="cpu.core_speeds.cluster2">
+        <value>806400</value>
+        <value>1094400</value>
+        <value>1267200</value>
+        <value>1516800</value>
+        <value>1766400</value>
+        <value>1862400</value>
+        <value>2035200</value>
+        <value>2169600</value>
+        <value>2361600</value>
+        <value>2400000</value>
+    </array>
+    <array name="cpu.core_power.cluster2">
+        <value>85.09</value>
+        <value>106.46</value>
+        <value>121.37</value>
+        <value>150.8</value>
+        <value>184.33</value>
+        <value>201.27</value>
+        <value>275.3</value>
+        <value>291.09</value>
+        <value>348.8</value>
+        <value>420.74</value>
+    </array>
+    <item name="cpu.active">11.86</item>
+    <item name="cpu.idle">5.37</item>
+    <item name="cpu.suspend">0</item>
+    <item name="battery.capacity">4250</item>
+    <item name="wifi.on">2.47</item>
+    <item name="wifi.active">266.5</item>
+    <item name="wifi.scan">34.36</item>
+    <item name="dsp.audio">26.75</item>
+    <item name="dsp.video">37.04</item>
+    <item name="camera.flashlight">108.77</item>
+    <item name="camera.avg">890.77</item>
+    <item name="gps.on">73.3</item>
+    <item name="radio.active">206.15</item>
+    <item name="radio.scanning">65</item>
+    <array name="radio.on">
+        <value>1.41</value>
+        <value>1.41</value>
+    </array>
+    <item name="modem.controller.idle">6</item>
+    <item name="modem.controller.rx">180</item>
+    <item name="modem.controller.tx">186</item>
+    <item name="modem.controller.voltage">3700</item>
+    <array name="memory.bandwidths">
+        <value>17</value>
+    </array>
+    <item name="wifi.controller.idle">1</item>
+    <item name="wifi.controller.rx">152</item>
+    <item name="wifi.controller.tx">190</item>
+    <array name="wifi.controller.tx_levels">1 </array>
+    <item name="wifi.controller.voltage">3700</item>
+    <array name="wifi.batchedscan">
+        <value>.0001</value>
+        <value>.001</value>
+        <value>.01</value>
+        <value>.1</value>
+        <value>1</value>
+    </array>
+    <item name="bluetooth.active">23.97</item>
+    <item name="bluetooth.on">1.39</item>
+    <item name="bluetooth.controller.voltage">3700</item>
+</device>