diff --git a/Xiaomi/Redmi6A/res/values/config.xml b/Xiaomi/Redmi6A/res/values/config.xml
index 5ad7907..77f94b7 100644
--- a/Xiaomi/Redmi6A/res/values/config.xml
+++ b/Xiaomi/Redmi6A/res/values/config.xml
@@ -1,5 +1,89 @@
 <?xml version="1.0" encoding="utf-8"?>
-<resources>
+<!--
+/*
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
+         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
+    <bool name="config_automatic_brightness_available">true</bool>
+
+    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 control points as follows:
+         (1-based arrays)
+         Point 1:            (0, value[1]):             lux <= 0
+         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
+         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
+         ...
+         Point N+1: (level[N], value[N+1]):  level[N] < lux
+         The control points must be strictly increasing.  Each control point
+         corresponds to an entry in the brightness backlight values arrays.
+         For example, if LUX == level[1] (first element of the levels array)
+         then the brightness will be determined by value[2] (second element
+         of the brightness values array).
+         Spline interpolation is used to determine the auto-brightness
+         backlight values for LUX levels between these control points.
+         Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>2</item>
+        <item>3</item>
+        <item>5</item>
+        <item>7</item>
+        <item>8</item>
+        <item>16</item>
+        <item>20</item>
+        <item>24</item>
+        <item>28</item>
+        <item>32</item>
+        <item>37</item>
+        <item>41</item>
+        <item>45</item>
+        <item>49</item>
+        <item>53</item>
+        <item>57</item>
+        <item>76</item>
+        <item>81</item>
+        <item>91</item>
+        <item>101</item>
+        <item>139</item>
+        <item>158</item>
+        <item>178</item>
+        <item>201</item>
+        <item>222</item>
+        <item>305</item>
+        <item>364</item>
+        <item>424</item>
+        <item>503</item>
+        <item>712</item>
+        <item>911</item>
+        <item>1113</item>
+        <item>1316</item>
+        <item>2025</item>
+        <item>2537</item>
+        <item>3039</item>
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         The brightness values must be between 0 and 255 and be non-decreasing.
+         This must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLcdBacklightValues">
         <item>1</item>
         <item>4</item>
@@ -39,77 +123,252 @@
         <item>221</item>
         <item>255</item>
     </integer-array>
-    <integer-array name="config_autoBrightnessLevels">
-        <item>2</item>
-        <item>3</item>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">2000</integer>
+
+    <!-- Fast brightness animation ramp rate in brightness units per second-->
+    <integer name="config_brightness_ramp_rate_fast">308</integer>
+
+    <!-- Slow brightness animation ramp rate in brightness units per second-->
+    <integer name="config_brightness_ramp_rate_slow">246</integer>
+
+    <!-- Minimum screen brightness setting allowed by the power manager.
+         The user is forbidden from setting the brightness below this level. -->
+    <integer name="config_screenBrightnessSettingMinimum">1</integer>
+
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>1</item>
+        <item>20</item>
+        <item>21</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>10</item>
+        <item>20</item>
+        <item>30</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
+    <integer-array name="config_keyboardTapVibePattern">
+        <item>40</item>
+    </integer-array>
+
+    <string-array name="config_mobile_tcp_buffers">
+        <item>lte:524288,1048576,2097152,262144,524288,1048576</item>
+        <item>lte_ca:524288,1048576,2097152,262144,524288,1048576</item>
+        <item>umts:4094,87380,524288,4096,16384,524288</item>
+        <item>hspa:4094,87380,524288,4096,16384,524288</item>
+        <item>hsupa:4094,87380,524288,4096,16384,524288</item>
+        <item>hsdpa:4094,87380,524288,4096,16384,524288</item>
+        <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
+        <item>edge:4093,26280,35040,4096,16384,35040</item>
+        <item>gprs:4092,8760,11680,4096,8760,11680</item>
+        <item>evdo:4094,87380,524288,4096,16384,262144</item>
+    </string-array>
+
+    <!-- Configure wifi tcp buffersizes in the form:
+         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
+    <string name="config_wifi_tcp_buffers" translatable="false">524288,1048576,5505024,262144,524288,5505024</string>
+
+    <!-- Array of allowable ConnectivityManager network types for tethering -->
+    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
+         [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
+    <integer-array translatable="false" name="config_tether_upstream_types">
+        <item>1</item>
+        <item>0</item>
         <item>5</item>
         <item>7</item>
-        <item>8</item>
-        <item>16</item>
-        <item>20</item>
-        <item>24</item>
-        <item>28</item>
-        <item>32</item>
-        <item>37</item>
-        <item>41</item>
-        <item>45</item>
-        <item>49</item>
-        <item>53</item>
-        <item>57</item>
-        <item>76</item>
-        <item>81</item>
-        <item>91</item>
-        <item>101</item>
-        <item>139</item>
-        <item>158</item>
-        <item>178</item>
-        <item>201</item>
-        <item>222</item>
-        <item>305</item>
-        <item>364</item>
-        <item>424</item>
-        <item>503</item>
-        <item>712</item>
-        <item>911</item>
-        <item>1113</item>
-        <item>1316</item>
-        <item>2025</item>
-        <item>2537</item>
-        <item>3039</item>
     </integer-array>
-    <bool name="config_automatic_brightness_available">true</bool>
-    <bool name="config_setColorTransformAccelerated">false</bool>
-    <bool name="config_supportAudioSourceUnprocessed">false</bool>
+
+    <!-- This string array should be overridden by the device to present a list of network
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array translatable="false" name="networkAttributes">
+        <item>wifi,1,1,1,-1,true</item>
+        <item>mobile,0,0,0,-1,true</item>
+        <item>mobile_mms,2,0,2,300000,true</item>
+        <item>mobile_supl,3,0,2,60000,true</item>
+        <item>mobile_dun,4,0,2,60000,true</item>
+        <item>mobile_hipri,5,0,3,60000,true</item>
+        <item>mobile_fota,10,0,2,60000,true</item>
+        <item>mobile_ims,11,0,-1,-1,true</item>
+        <item>mobile_cbs,12,0,2,60000,true</item>
+        <item>bluetooth,7,7,2,-1,true</item>
+        <item>ethernet,9,9,4,-1,true</item>
+        <item>wifi_p2p,13,1,0,-1,true</item>
+        <item>mobile_ia,14,0,2,-1,true</item>
+        <item>mobile_emergency,15,0,2,-1,true</item>
+        <item>mobile_dm,20,0,3,60000,true</item>
+        <item>mobile_wap,21,0,3,60000,true</item>
+        <item>mobile_net,22,0,3,60000,true</item>
+        <item>mobile_cmmail,23,0,3,60000,true</item>
+        <item>mobile_rcse,24,0,3,60000,true</item>
+        <item>mobile_xcap,25,0,3,60000,true</item>
+        <item>mobile_rcs,26,0,3,60000,true</item>
+        <item>mobile_bip,27,0,3,60000,true</item>
+        <item>mobile_vsim,28,0,-1,60000,true</item>
+        <item>mobile_preempt,29,0,9,60000,true</item>
+    </string-array>
+
+    <!-- This string array should be overridden by the device to present a list of radio
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[ConnectivityManager connectionType],
+                      [# simultaneous connection types]"  -->
+    <string-array translatable="false" name="radioAttributes">
+        <item>1,1</item>
+        <item>0,1</item>
+        <item>7,1</item>
+        <item>9,1</item>
+    </string-array>
+	
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"rndis\\d"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
+         should be empty.  An example would be "softap.*" -->
+    <string-array translatable="false" name="config_tether_wifi_regexs">
+        <item>"ap\\d"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
+         should be empty. -->
+    <string-array translatable="false" name="config_tether_bluetooth_regexs">
+        <item>"bt-pan"</item>
+        <item>"bt-dun"</item>
+    </string-array>
+  
+    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
+         on the headphone/microphone jack. When false use the older uevent framework. -->
     <bool name="config_useDevInputEventForAudioJack">true</bool>
-    <bool name="skip_restoring_network_selection">true</bool>
-    <bool name="config_bluetooth_le_peripheral_mode_supported">false</bool>
-    <bool name="config_carrier_volte_available">false</bool>
-    <bool name="config_device_volte_available">true</bool>
-    <bool name="config_device_vt_available">true</bool>
-    <bool name="config_device_wfc_ims_available">false</bool>
-    <bool name="config_hotswapCapable">true</bool>
+
+    <!-- Is the device capable of hot swapping an ICC Card -->
+    <bool name="config_hotswapCapable">true</bool>	
+
+    <!-- Default list of files pinned by the Pinner Service -->
+    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+        <item>"/system/framework/arm/boot.oat"</item>
+        <item>"/system/framework/oat/arm/services.odex"</item>
+        <item>"/system/framework/arm/boot-framework.oat"</item>
+        <item>"/system/framework/arm/boot-core-libart.oat"</item>		
+    </string-array>
+
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">true</bool>	
+
+    <!-- Enable round icons -->
+    <bool name="config_useRoundIcon">true</bool>
+
+    <!-- Whether device supports double tap to wake -->
+    <bool name="config_supportDoubleTapWake">true</bool>
+
+    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently in hardware. -->
+    <bool name="config_setColorTransformAccelerated">true</bool>
+
+    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
+         it causes the device to wake up.
+         The default is false. -->
     <bool name="config_lidControlsSleep">true</bool>
-    <bool name="config_wifiDisplaySupportsProtectedBuffers">false</bool>
-    <bool name="config_wifi_background_scan_support">true</bool>
-    <bool name="config_wifi_batched_scan_supported">false</bool>
-    <bool name="config_wifi_dual_band_support">false</bool>
-    <bool name="config_dozeAlwaysOnDisplayAvailable">false</bool>
-    <bool name="config_displayBlanksAfterDoze">true</bool>
+
+    <!-- Boolean indicating if restoring network selection should be skipped -->
+    <!-- The restoring is handled by modem if it is true-->
+    <bool name="skip_restoring_network_selection">true</bool>
+
+    <!--  Whether Multiuser UI should be shown -->
+    <bool name="config_enableMultiUserUI">true</bool>
+
+    <!--  Maximum number of supported users -->
+    <integer name="config_multiuserMaximumUsers">4</integer>
+
+    <!-- Should the pinner service pin the Camera application? -->
+    <bool name="config_pinnerCameraApp">true</bool>
+
+    <!-- Should the pinner service pin the Home application? -->
+    <bool name="config_pinnerHomeApp">true</bool>
+
+    <!-- ComponentName of a dream to show whenever the system would otherwise have
+         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
+         try to start this dream if possible.  The dream should typically call startDozing()
+         to put the display into a low power state and allow the application processor
+         to be suspended.  When the dream ends, the system will go to sleep as usual.
+         Specify the component name or an empty string if none.
+         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
+         Doze dreams will run whenever the power manager is in a dozing state. -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- If true, the doze component is not started until after the screen has been
+         turned off and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOffByDefault">true</bool>
+
+    <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
+         device from the display on/off state.
+         When false, autosuspend_disable() will be called before the display is turned on
+         and autosuspend_enable() will be called after the display is turned off.
+         This mode provides best compatibility for devices using legacy power management
+         features such as early suspend / late resume.
+         When true, autosuspend_display() and autosuspend_enable() will be called
+         independently of whether the display is being turned on or off.  This mode
+         enables the power manager to suspend the application processor while the
+         display is on.
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+         Refer to autosuspend.h for details.
+    -->
     <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">false</bool>
-    <dimen name="rounded_corner_radius">11.0dip</dimen>
-    <fraction name="config_autoBrightnessAdjustmentMaxGamma">300.0%</fraction>
-    <fraction name="config_maximumScreenDimRatio">29.999996%</fraction>
-    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
-    <integer name="config_autoBrightnessDarkeningLightDebounce">2000</integer>
-    <integer name="config_screenBrightnessDark">1</integer>
-    <integer name="config_screenBrightnessDim">1</integer>
-    <integer name="config_screenBrightnessDoze">1</integer>
-    <integer name="config_screenBrightnessSettingDefault">102</integer>
-    <integer name="config_screenBrightnessSettingMaximum">255</integer>
-    <integer name="config_screenBrightnessSettingMinimum">8</integer>
-    <integer name="config_bluetooth_idle_cur_ma">1</integer>
-    <integer name="config_bluetooth_operating_voltage_mv">4</integer>
-    <integer name="config_bluetooth_rx_cur_ma">2</integer>
-    <integer name="config_bluetooth_tx_cur_ma">3</integer>
-    <integer name="config_shutdownBatteryTemperature">680</integer>
+
+    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
+         May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDoze">17</integer>
+	
+    <!-- Notification LED support -->
+    <bool name="config_intrusiveBatteryLed">true</bool>
+    <bool name="config_intrusiveNotificationLed">true</bool>
+    <bool name="config_ledCanPulse">true</bool>
+	
+    <!-- Notification LED does not support color, so we disable it. -->
+    <bool name="config_multiColorNotificationLed">false</bool>
+    <bool name="config_multiColorBatteryLed">false</bool>
+
+    <!-- Doze: does this device support STATE_DOZE?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Allow devices to enforce the H265 encoder for screen recordings -->
+    <bool name="config_useNewScreenRecEncoder">false</bool>
+
+    <!-- FPSInfoService FPS node file path -->
+    <string name="config_fpsInfoSysNode" translatable="false">/sys/module/primary_display/parameters/display_framerate_main</string>
+
+    <!-- Whether to show Connected MAC Randomization in Developer Options
+         as not all devices can support dynamic MAC address change.  -->
+    <bool name="config_wifi_support_connected_mac_randomization">true</bool>
+
+    <!-- Battery Health -->
+    <string name="config_batChargeCycle">/sys/class/power_supply/battery/cycle_count</string>
+    <string name="config_batDesCap">/sys/class/power_supply/battery/charge_full_design</string>
+    <string name="config_batCurCap">/sys/class/power_supply/battery/charge_full</string>
+    <bool name="config_supportBatteryHealth">true</bool>
 </resources>
diff --git a/Xiaomi/Redmi6A/res/values/dimens.xml b/Xiaomi/Redmi6A/res/values/dimens.xml
new file mode 100644
index 0000000..69a4fae
--- /dev/null
+++ b/Xiaomi/Redmi6A/res/values/dimens.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+* Copyright (c) 2006, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<resources>
+    <dimen name="nav_content_padding">2px</dimen>
+    <dimen name="rounded_corner_radius">22px</dimen>
+    <dimen name="rounded_corner_content_padding">2px</dimen>
+</resources>
diff --git a/Xiaomi/Redmi6A/res/xml/power_profile.xml b/Xiaomi/Redmi6A/res/xml/power_profile.xml
index f25b91d..2f05d00 100644
--- a/Xiaomi/Redmi6A/res/xml/power_profile.xml
+++ b/Xiaomi/Redmi6A/res/xml/power_profile.xml
@@ -25,6 +25,7 @@
     <item name="modem.controller.voltage">700</item>
     <array name="cpu.clusters.cores">
         <value>4</value>
+        <value>4</value>
     </array>
     <array name="cpu.speeds.cluster0">
         <value>2001000</value>
@@ -44,6 +45,24 @@
         <value>979000</value>
         <value>900000</value>
     </array>
+    <array name="cpu.speeds.cluster1">
+        <value>1500000</value>
+        <value>1429000</value>
+        <value>1367000</value>
+        <value>1314000</value>
+        <value>1261000</value>
+        <value>1208000</value>
+        <value>1155000</value>
+        <value>1102000</value>
+        <value>1050000</value>
+        <value>948000</value>
+        <value>846000</value>
+        <value>745000</value>
+        <value>643000</value>
+        <value>542000</value>
+        <value>460000</value>
+        <value>400000</value>
+    </array>
     <array name="cpu.active.cluster0">
         <value>947</value>
         <value>856</value>
@@ -62,6 +81,24 @@
         <value>102</value>
         <value>61</value>
     </array>
+    <array name="cpu.active.cluster1">
+        <value>576</value>
+        <value>510</value>
+        <value>444</value>
+        <value>379</value>
+        <value>337</value>
+        <value>296</value>
+        <value>255</value>
+        <value>223</value>
+        <value>192</value>
+        <value>160</value>
+        <value>135</value>
+        <value>110</value>
+        <value>85</value>
+        <value>64</value>
+        <value>43</value>
+        <value>22</value>
+    </array>
     <item name="cpu.idle">2.3</item>
     <array name="memory.bandwidths">
         <value>45</value>
@@ -73,10 +110,26 @@
     <array name="wifi.controller.tx_levels" />
     <item name="wifi.controller.voltage">2550</item>
     <array name="wifi.batchedscan">
+        <value>.0002</value>
+        <value>.002</value>
+        <value>.02</value>
+        <value>.2</value>
+        <value>2</value>
+    </array>
+    <item name="modem.controller.sleep">0</item>
+    <item name="modem.controller.idle">0</item>
+    <item name="modem.controller.rx">0</item>
+    <array name="modem.controller.tx">
         <value>0</value>
         <value>0</value>
         <value>0</value>
         <value>0</value>
         <value>0</value>
     </array>
-</device>
\ No newline at end of file
+    <item name="modem.controller.voltage">0</item>
+    <array name="gps.signalqualitybased">
+        <value>0</value>
+        <value>0</value>
+    </array>
+    <item name="gps.voltage">0</item>
+</device>