diff --git a/Xiaomi/Mi11Lite5G/Android.mk b/Xiaomi/Mi11Lite5G/Android.mk
new file mode 100644
index 0000000..29f439a
--- /dev/null
+++ b/Xiaomi/Mi11Lite5G/Android.mk
@@ -0,0 +1,8 @@
+LOCAL_PATH := $(call my-dir)
+include $(CLEAR_VARS)
+LOCAL_MODULE_TAGS := optional
+LOCAL_PACKAGE_NAME := treble-overlay-xiaomi-mi11lite5g
+LOCAL_MODULE_PATH := $(TARGET_OUT_PRODUCT)/overlay
+LOCAL_IS_RUNTIME_RESOURCE_OVERLAY := true
+LOCAL_PRIVATE_PLATFORM_APIS := true
+include $(BUILD_PACKAGE)
diff --git a/Xiaomi/Mi11Lite5G/AndroidManifest.xml b/Xiaomi/Mi11Lite5G/AndroidManifest.xml
new file mode 100644
index 0000000..2f29c49
--- /dev/null
+++ b/Xiaomi/Mi11Lite5G/AndroidManifest.xml
@@ -0,0 +1,10 @@
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+        package="me.phh.treble.overlay.xiaomi.mi11lite5g"
+        android:versionCode="1"
+        android:versionName="1.0">
+        <overlay android:targetPackage="android"
+                android:requiredSystemPropertyName="ro.vendor.build.fingerprint"
+                android:requiredSystemPropertyValue="+*iaomi/renoir*"
+		android:priority="511"
+		android:isStatic="true" />
+</manifest>
diff --git a/Xiaomi/Mi11Lite5G/res/values/config.xml b/Xiaomi/Mi11Lite5G/res/values/config.xml
new file mode 100644
index 0000000..e35c9da
--- /dev/null
+++ b/Xiaomi/Mi11Lite5G/res/values/config.xml
@@ -0,0 +1,382 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2017, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<resources>
+    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
+        the framework from using higher refresh rates, even if display modes with higher refresh
+        rates are available from hardware composer. Only has an effect if the value is
+        non-zero. -->
+    <integer name="config_defaultPeakRefreshRate">90</integer>
+
+    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_ambientThresholdLevels. The brightening threshold is calculated as
+        lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
+        the screen brightness is recalculated. See the config_ambientThresholdLevels
+        description for how the constraint value is chosen. -->
+    <integer-array name="config_ambientBrighteningThresholds">
+        <item>2</item>
+        <item>5</item>
+        <item>10</item>
+        <item>30</item>
+        <item>100</item>
+        <item>400</item>
+        <item>600</item>
+        <item>1000</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_ambientThresholdLevels. The darkening threshold is calculated as
+        lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
+        the screen brightness is recalculated. See the config_ambientThresholdLevels
+        description for how the constraint value is chosen. -->
+    <integer-array name="config_ambientDarkeningThresholds">
+        <item>800</item>
+        <item>800</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+    </integer-array>
+
+    <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
+        values by calculating the index to use for lookup and then setting the constraint value
+        to the corresponding value of the array. The new brightening hysteresis constraint value
+        is the n-th element of config_ambientBrighteningThresholds, and the new darkening
+        hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds.
+        The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
+        condition                       calculated index
+        value < level[0]                0
+        level[n] <= value < level[n+1]  n+1
+        level[MAX] <= value             MAX+1 -->
+    <integer-array name="config_ambientThresholdLevels">
+        <item>2</item>
+        <item>10</item>
+        <item>30</item>
+        <item>100</item>
+        <item>800</item>
+        <item>2000</item>
+        <item>4000</item>
+    </integer-array>
+
+    <!-- Array of desired screen brightness in nits corresponding to the lux values
+        in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
+        config_screenBrightnessMaximumNits, the display brightness is defined as the measured
+        brightness of an all-white image.
+        If this is defined then:
+         - config_autoBrightnessLcdBacklightValues should not be defined
+         - config_screenBrightnessNits must be defined
+         - config_screenBrightnessBacklight must be defined
+        This array should have size one greater than the size of the config_autoBrightnessLevels
+        array. The brightness values must be non-negative and non-decreasing. This must be
+        overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessDisplayValuesNits">
+        <item>5</item>
+        <item>5</item>
+        <item>5</item>
+        <item>17</item>
+        <item>24</item>
+        <item>31</item>
+        <item>34</item>
+        <item>46</item>
+        <item>59</item>
+        <item>76</item>
+        <item>81</item>
+        <item>82</item>
+        <item>82</item>
+        <item>82</item>
+        <item>83</item>
+        <item>83</item>
+        <item>83</item>
+        <item>84</item>
+        <item>84</item>
+        <item>85</item>
+        <item>85</item>
+        <item>85</item>
+        <item>85</item>
+        <item>86</item>
+        <item>86</item>
+        <item>87</item>
+        <item>89</item>
+        <item>90</item>
+        <item>91</item>
+        <item>93</item>
+        <item>94</item>
+        <item>96</item>
+        <item>97</item>
+        <item>99</item>
+        <item>100</item>
+        <item>101</item>
+        <item>104</item>
+        <item>105</item>
+        <item>106</item>
+        <item>108</item>
+        <item>109</item>
+        <item>111</item>
+        <item>112</item>
+        <item>114</item>
+        <item>116</item>
+        <item>137</item>
+        <item>157</item>
+        <item>180</item>
+        <item>205</item>
+        <item>226</item>
+        <item>257</item>
+        <item>280</item>
+        <item>295</item>
+        <item>369</item>
+        <item>434</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+    </integer-array>
+
+    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+        The N entries of this array define N + 1 control points as follows:
+        (1-based arrays)
+        Point 1:            (0, value[1]):             lux <= 0
+        Point 2:     (level[1], value[2]):  0        < lux <= level[1]
+        Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
+        ...
+        Point N+1: (level[N], value[N+1]):  level[N] < lux
+        The control points must be strictly increasing.  Each control point
+        corresponds to an entry in the brightness backlight values arrays.
+        For example, if lux == level[1] (first element of the levels array)
+        then the brightness will be determined by value[2] (second element
+        of the brightness values array).
+        Spline interpolation is used to determine the auto-brightness
+        backlight values for lux levels between these control points.
+        Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>1</item>
+        <item>2</item>
+        <item>4</item>
+        <item>6</item>
+        <item>8</item>
+        <item>10</item>
+        <item>15</item>
+        <item>20</item>
+        <item>25</item>
+        <item>30</item>
+        <item>35</item>
+        <item>40</item>
+        <item>45</item>
+        <item>50</item>
+        <item>55</item>
+        <item>60</item>
+        <item>65</item>
+        <item>70</item>
+        <item>75</item>
+        <item>80</item>
+        <item>85</item>
+        <item>90</item>
+        <item>95</item>
+        <item>100</item>
+        <item>120</item>
+        <item>140</item>
+        <item>160</item>
+        <item>180</item>
+        <item>200</item>
+        <item>220</item>
+        <item>240</item>
+        <item>260</item>
+        <item>280</item>
+        <item>300</item>
+        <item>320</item>
+        <item>340</item>
+        <item>360</item>
+        <item>380</item>
+        <item>400</item>
+        <item>420</item>
+        <item>440</item>
+        <item>460</item>
+        <item>480</item>
+        <item>500</item>
+        <item>700</item>
+        <item>900</item>
+        <item>1100</item>
+        <item>1300</item>
+        <item>1500</item>
+        <item>1700</item>
+        <item>1900</item>
+        <item>2000</item>
+        <item>2500</item>
+        <item>3000</item>
+        <item>3500</item>
+        <item>4000</item>
+        <item>4500</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_screenThresholdLevels. The darkening threshold is calculated as
+        screenBrightness * (1.0f - CONSTRAINT_VALUE). When the new screen brightness is lower than
+        this threshold, it is applied. See the config_screenThresholdLevels description for how
+        the constraint value is chosen. -->
+    <integer-array name="config_screenBrightnessBacklight">
+        <item>2</item>
+        <item>3</item>
+        <item>10</item>
+        <item>15</item>
+        <item>30</item>
+        <item>45</item>
+        <item>60</item>
+        <item>75</item>
+        <item>90</item>
+        <item>105</item>
+        <item>120</item>
+        <item>135</item>
+        <item>150</item>
+        <item>165</item>
+        <item>180</item>
+        <item>195</item>
+        <item>210</item>
+        <item>225</item>
+        <item>240</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
+        values in the config_screenBrightnessBacklight array.  On OLED displays these  values
+        should be measured with an all white image while the display is in the fully on state.
+        Note that this value should *not* reflect the maximum brightness value for any high
+        brightness modes but only the maximum brightness value obtainable in a sustainable manner.
+        This array should be equal in size to config_screenBrightnessBacklight -->
+    <integer-array name="config_screenBrightnessNits">
+        <item>2</item>
+        <item>4</item>
+        <item>22</item>
+        <item>30</item>
+        <item>68</item>
+        <item>95</item>
+        <item>133</item>
+        <item>165</item>
+        <item>192</item>
+        <item>218</item>
+        <item>255</item>
+        <item>290</item>
+        <item>326</item>
+        <item>352</item>
+        <item>384</item>
+        <item>399</item>
+        <item>422</item>
+        <item>432</item>
+        <item>442</item>
+        <item>455</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_dynamicHysteresisLuxLevels. The brightening threshold is calculated as
+        lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
+        the screen brightness is recalculated. See the config_dynamicHysteresisLuxLevels
+        description for how the constraint value is chosen. -->
+    <integer-array name="config_dynamicHysteresisBrightLevels">
+        <item>2000</item>
+        <item>2000</item>
+        <item>1000</item>
+        <item>1000</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_dynamicHysteresisLuxLevels. The darkening threshold is calculated as
+        lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
+        the screen brightness is recalculated. See the config_dynamicHysteresisLuxLevels
+        description for how the constraint value is chosen. -->
+    <integer-array name="config_dynamicHysteresisDarkLevels">
+        <item>800</item>
+        <item>800</item>
+        <item>800</item>
+        <item>800</item>
+        <item>800</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+    </integer-array>
+
+    <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
+        values by calculating the index to use for lookup and then setting the constraint value
+        to the corresponding value of the array. The new brightening hysteresis constraint value
+        is the n-th element of config_dynamicHysteresisBrightLevels, and the new darkening
+        hysteresis constraint value is the n-th element of config_dynamicHysteresisDarkLevels.
+        The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
+        condition                      calculated index
+        value < lux[0]                 0
+        lux[n] <= value < lux[n+1]     n+1
+        lux[MAX] <= value              MAX+1 -->
+    <integer-array name="config_dynamicHysteresisLuxLevels">
+        <item>2</item>
+        <item>10</item>
+        <item>30</item>
+        <item>100</item>
+        <item>800</item>
+        <item>2000</item>
+        <item>4000</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_screenThresholdLevels. The brightening threshold is calculated as
+        screenBrightness * (1.0f + CONSTRAINT_VALUE). When the new screen brightness is higher
+        than this threshold, it is applied. See the config_screenThresholdLevels description for
+        how the constraint value is chosen. -->
+    <integer-array name="config_screenBrighteningThresholds">
+        <item>0</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
+        percent. The length of this array is assumed to be one greater than
+        config_screenThresholdLevels. The darkening threshold is calculated as
+        screenBrightness * (1.0f - CONSTRAINT_VALUE). When the new screen brightness is lower than
+        this threshold, it is applied. See the config_screenThresholdLevels description for how
+        the constraint value is chosen. -->
+    <integer-array name="config_screenDarkeningThresholds">
+        <item>0</item>
+    </integer-array>
+
+    <!-- The maximum range of gamma adjustment possible using the screen
+        auto-brightness adjustment setting. -->
+    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100%</fraction>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+        for debouncing the light sensor.  Different constants are used to debounce the light sensor
+        when adapting to brighter or darker environments.  This parameter controls how quickly
+        brightness changes occur in response to an observed change in light level that exceeds the
+        hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
+
+    <!-- Maximum screen brightness allowed by the power manager.
+        The user is forbidden from setting the brightness above this level. -->
+    <integer name="config_screenBrightnessSettingMaximum">255</integer>
+
+    <!-- Minimum screen brightness setting allowed by the power manager.
+        The user is forbidden from setting the brightness below this level. -->
+    <integer name="config_screenBrightnessSettingMinimum">2</integer>
+
+    <!-- Minimum screen brightness allowed by the power manager. -->
+    <integer name="config_screenBrightnessDim">6</integer>
+</resources>
diff --git a/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml b/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml
new file mode 100644
index 0000000..997ee1d
--- /dev/null
+++ b/Xiaomi/Mi11Lite5G/res/xml/power_profile.xml
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="utf-8"?>
+<device name="Android">
+    <item name="ambient.on">0.1</item>
+    <item name="screen.on">0.1</item>
+    <item name="screen.full">0.1</item>
+    <item name="bluetooth.active">0.1</item>
+    <item name="bluetooth.on">0.1</item>
+    <item name="wifi.on">0.1</item>
+    <item name="wifi.active">0.1</item>
+    <item name="wifi.scan">0.1</item>
+    <item name="audio">0.1</item>
+    <item name="video">0.1</item>
+    <item name="camera.flashlight">0.1</item>
+    <item name="camera.avg">0.1</item>
+    <item name="gps.on">0.1</item>
+    <item name="radio.active">0.1</item>
+    <item name="radio.scanning">0.1</item>
+    <array name="radio.on">
+        <value>0.2</value>
+        <value>0.1</value>
+    </array>
+    <array name="cpu.active">
+        <value>0.1</value>
+    </array>
+    <array name="cpu.clusters.cores">
+        <value>1</value>
+    </array>
+    <array name="cpu.speeds.cluster0">
+        <value>400000</value>
+    </array>
+    <array name="cpu.active.cluster0">
+        <value>0.1</value>
+    </array>
+    <item name="cpu.idle">0.1</item>
+    <array name="memory.bandwidths">
+        <value>22.7</value>
+    </array>
+    <item name="battery.capacity">1000</item>
+    <item name="wifi.controller.idle">0</item>
+    <item name="wifi.controller.rx">0</item>
+    <item name="wifi.controller.tx">0</item>
+    <array name="wifi.controller.tx_levels" />
+    <item name="wifi.controller.voltage">0</item>
+    <array name="wifi.batchedscan">
+        <value>.0002</value>
+        <value>.002</value>
+        <value>.02</value>
+        <value>.2</value>
+        <value>2</value>
+    </array>
+    <item name="modem.controller.sleep">0</item>
+    <item name="modem.controller.idle">0</item>
+    <item name="modem.controller.rx">0</item>
+    <array name="modem.controller.tx">
+        <value>0</value>
+        <value>0</value>
+        <value>0</value>
+        <value>0</value>
+        <value>0</value>
+    </array>
+    <item name="modem.controller.voltage">0</item>
+    <array name="gps.signalqualitybased">
+        <value>0</value>
+        <value>0</value>
+    </array>
+    <item name="gps.voltage">0</item>
+</device>
\ No newline at end of file
diff --git a/overlay.mk b/overlay.mk
index 9d324a5..545b4e8 100755
--- a/overlay.mk
+++ b/overlay.mk
@@ -136,6 +136,7 @@ PRODUCT_PACKAGES += \
 	treble-overlay-vsmart-live \
 	treble-overlay-webview \
 	treble-overlay-wifi5g \
+	treble-overlay-xiaomi-mi11lite5g \
 	treble-overlay-xiaomi-mi6x \
 	treble-overlay-xiaomi-mi8 \
 	treble-overlay-xiaomi-mi8ee \